CSR64 MET COKE
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Weexport many kinds of coke, such as CSR64 % and CSR 62% metallurgical coke (metcoke), the NUT coke of 10 to 30 mm, coke breeze of 0 to 10 mm, and so on.
We can offer belowgrade met coke, origin from China.
Parameters | Ash(DB) | Sulphur (DB) | CSR
| Size 30-90mm | +90mm
| -30mm |
Guarantee | 12.5%max | 0.7%max | 64%min | 90%min | 5%max | 5%max |
Atpresent, the main customers are NOBLE GROUP, IMR and so on. Our main overseasmarkets are Japan, India, Brazil, Iran, Vietnam, and so on.
Shouldany of these items be of interest to you, please let us know. We will behappy to give you a quotation upon receipt of your detailed requirements.
- Q:Ask: coking coke tower tower and what is the relationship?If you can give a working principle to explain what is better!Coking tower in oil coking plant
- Coking plant coal tower, primary cooling tower, cooling tower, etc.. The coal tower is used to store coal for coke oven. The cooling tower is used to cool the gas and cooling tower cooling water.
- Q:The cost of iron ore and coke
- At present the general level of building materials enterprises, the price of 2400 yuan / ton steel
- Q:the CO reduces the iron oxide, and the part of CO burns, and the whole process will release a lot of heatCheck information, combined with the knowledge of the professional knowledge, for reference purposes only!
- Coke index:The mechanical strength of the mechanical strength of ash sulfur%% volatile(crush strength M40) (abrasion strength M10)No greater than 12 is not greater than 0.6 not less than 80 not greater than 8 not greater than 1.9Two level 12.01-13.50 0.61-0.80 not less than 76 not greater than 9 not greater than 1.9Three level 13.51-15.00 0.81-1.00 not less than 72 not greater than 10 not greater than 1.9
- Q:What is the phosphorus content in coke
- Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis.
- Q:Braised meat burning coke, iron black layer, I do not know how to clean, please help answer
- Tomatoes to the bottom of the potNot a few good tomatoes in the pot boil, it will naturally fall.4, beer and liquor to the bottom of the potIf cooking is careful not to paste pot, the pot dish, if not easy to brush off, can pour a little wine and beer and a small amount of water (1:1:0.5 ratio) mixed cover, placed 5 minutes after it is easy to scrub clean.
- Q:Listen to a lot of people say that steel is now coke is not true?
- Steelmaking is definitely not coke, but now most of the very mature iron making technology needs coke, the future direction of development of iron is not used or less coke
- Q:Who knows the proportion of pig iron and coke used in Cupola
- There are doubts: blank parts output is too low.3, blank export rate: raw materials into melting after the formation of blank, under normal circumstances, the common casting investment for every 1 tons of pig iron, scrap steel and other major raw materials, the lowest to 85% iron, after casting output blanks, nozzle, nozzle, riser, riser for iron smelting water ratio of about 30%; blank standard export rate, nozzle, riser re melted continue after put into use; production enterprises invested 1 tons per dryer, iron scrap and other major raw materials to the lowest 85% of the hot metal, roughly the same with ordinary casting, casting blank after the (standard yield) for hot metal ratio is about 70%, water riser for hot metal ratio is about 15%, and the same outlet riser re melted after continued use.
- Q:Why in the blast furnace ironmaking with coke instead of charcoal why coke can produce heat to improve the heat of the furnace how to produceWhy in the blast furnace ironmaking with coke instead of charcoal why coke can produce heat to improve the heat of the furnace how to produce
- Under the condition of isolated air, the bituminous coal is heated to 950-1050 DEG C, and finally, the coke is made by drying, pyrolysis, melting, bonding, solidification and shrinkage
- Q:What is the density of coke?
- There is also a parameter is also available for your reference: coke porosity of 35% ~ 55%The above parameter is a general range, according to the need to choose to determine.
- Q:What's the difference between coke and coke?
- When the dry distillation is carried out in the chamber type dry distillation furnace, the primary thermal decomposition product is contacted with the red hot coke and the high temperature furnace wall, and the two thermal decomposition occurs, and the thermal decomposition product (coke oven gas and other coking chemical products) is formed in the two timeThe solid product of low temperature distillation is a black semi coke with loose structure, low gas yield and high tar yield;The high temperature distillation solid product is the structure compact silver gray coke, the coal gas production rate is high and the tar production rate is low
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
CSR64 MET COKE
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches