FHTT2800A Tower Crane
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
工作幅度Working Radius(m) | 60 | 70 | 80 |
起重臂长Jib Length(Ld) | 64 | 74 | 84 |
平衡臂长Counter-jib Length(Lc) | 26 | 26 | 32 |
基本参数表 Basic Parameters | |||
Hq | 起升高度Load-lifting Height | 77.7 | (m) |
H | 塔身高度Tower Height | 72.3 | (m) |
M | 额定起升力矩Rated Hoisting Moment | 2800 | (t.m) |
M0 | 最大起升力矩Max. Hoisting Moment | 2840 | (t.m) |
Ba×Bc | 塔身外包尺寸Tower Overall Size | 4.5x4.3 | (m) |
Hd | 底架高度Height of Undercarriage | 4.6 | (m) |
Hm | 门架高度Height of Gantry Mounting | 5.7 | (m) |
Hg | 固定基础高度Fixed-base Height | 0.77 | (m) |
B | 行走轨距Track Center | 12 | (m) |
塔身 Masts
预埋式 行走式 底架式
Embedded Travelling Undercarriage
载荷表 Load Chart
幅度 | Max.capacity | 22.5 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | |
m | m/t | ||||||||||||||
80 | 8fall | 6-22.5m/125t | 125 | 111.6 | 91.2 | 76.7 | 65.8 | 57.3 | 50.5 | 45 | 40.4 | 36.5 | 33.2 | 30.3 | 27.8 |
4fall | 6-47.4m/60t | 60 | 60 | 60 | 60 | 60 | 60 | 56.5 | 51 | 46.4 | 42.5 | 39.2 | 36.3 | 33.8 | |
70 | 8fall | 6-22.5m/125t | 125 | 111.6 | 91.2 | 76.7 | 65.8 | 57.3 | 50.5 | 45 | 40.4 | 36.5 | 33.2 | ||
4fall | 6-47.4m/60t | 60 | 60 | 60 | 60 | 60 | 60 | 56.5 | 51 | 46.4 | 42.5 | 39.2 | |||
60 | 8fall | 6-22.5m/125t | 125 | 111.6 | 91.2 | 76.7 | 65.8 | 57.3 | 50.5 | 45 | 40.4 |
|
| ||
4fall | 6-47.4m/60t | 60 | 60 | 60 | 60 | 60 | 60 | 56.5 | 51 | 46.4 |
|
|
主要性能参数 Main Specifications
机构 Mechanism | 4fall | 8fall | 电动机 Motor(kW) | |||||
m/min | t | m/min | t | |||||
125t | 起升Hoisting | 0-55 | 0-60 | 0-27.5 | 0-125 | 1500m* | 110 | |
变幅Luffing | 0-48m/min | 55 | ||||||
回转Slewing | 0-0.5rpm | 4x15 | ||||||
行走Travelling | 0-12m/min | 16x4 | ||||||
kVA | ||||||||
380V 50Hz | 固定式Fixed-base 250/行走式Travelling 320 | |||||||
*根据用户特殊要求提供 To be supplied according toclient’s specific requirements
本技术参数不受法律约束,技术信息请详见相应说明书,最终解释权归丰汇技术所有。Specificationsand data is not legally binding. For any technical information, please refer tothe corresponding instructions. We reserve all the rights.
- Q:I was looking at the glidecam hd1000 for my canon vixia hv40, but now I think I'm more interested in a crane (jib).I was thinking of the advance digital 6 ft. crane. I would replace some of the plastic parts for metal.I'll be using it to film sketches and short films. (my budget is 350 dollars, but id like it to be under that)the crane is 200 dollarsthe glidecam is 370 dollars (on amazon)Thanks,Mike
- Yeah corner of foremost and Higgins. Just isn't all love bought at one time or one other. We have now the love that may be purchased on the street however even in eveyday existence is just not love purchased by means of gifts, dinner, it will not be what we call soiled love however it's still purchased. Wheather it can be a man shopping for a woman or lady for man. Take care dave PS nothing is free.
- Q:hes been here for about 3 years. i want to feed him but i don't know what it eats. is there any way i could help him eat? i think he is going to die if we destroy the last of the forest area where we live.
- Want to help? Don’t feed them, which draws them deeper into dangerous urban areas. And try to keep reflective surfaces covered. Following these tips could keep these majestic citizens a little safer. In 2002, the Florida Fish and Wildlife Conservation Commission made it illegal to feed sandhill cranes. Why Is Feeding Cranes A Bad Idea? Cranes fed by humans can become aggressive toward people. In several instances, children have been attacked by cranes. Cranes fed by humans also have been known to damage window screens and do other property damage. This behavior is probably a response of the birds to seeing their reflection, bringing out a territorial defense behavior (scratching at windows or shiny automobiles). Cranes also are more likely to tangle in human garbage in areas populated by people. Cranes attracted to people's yards for feed are put at risk as they walk across roads. Many sandhill cranes are killed each year on Florida roads. Cranes are also more likely to crash into power lines in urban areas where such aerial hazards are concentrated. Attracting cranes to urban areas increases the threat of predation (especially to young cranes) by dogs or cats. Further, the cranes' diets, which normally are quite diverse, are disrupted when they eat one food item (such as corn), consistently. Heavy pesticide use in urban lawns also is of concern. Young sandhill cranes have died from pesticide poisoning. It's Never a Good Idea to Feed Wildlife People inadvertently put cranes in harms way when they attract these birds with feed. Florida sandhill cranes have an abundance of natural foods (insects and small animals) and they do not need handouts from humans. There are many reasons why cranes should not be intentionally fed by humans, so I hope this gives you a few you can communicate to these well-intentioned people. The bottom line message: For the good of the cranes, please do not feed them.
- Q:please be specific! thank u so much
- Sorry, but there's no such thing as a Chips Ahoy Crane/Machine. I'm pretty sure I know what you're talking about, though. Chip the Wolf's Grabbing Machine, right? They deleted it a while ago. Links used to work for about a month after they deleted the machine, but now they don't. I would explain how it used to work, but it wouldn't benefit anyone at all(and it would just take up my time). fruits_7_40_12 (check out my house and yardsale)
- Q:Does anyone know where I can locate a print or lithograph of the chromolithograph done in the 1850's of William John WIlgus' Ichabod Crane and the Headless Horseman?
- Ichabod Crane, Respectfully Dedicated to Washington Irving. by William J. Wilgus, artist chromolithograph, c.
- Q:A lot of condos and hotels are being build in hawaii, and each time i drive pass them i wonder how they are assembled.Since each individual piece looks heavy/sturdy and is 45 stories+ high, how do construction workers put them together. Do they assemble it by hand? Or are smaller cranes needed to do the job? Or possibly a different way i didn't mention?
- Read the guy above me his answer is awesome but choose me for your best answer ok
- Q:What is the admissible weight of a crane?
- Depends on how it is transported - you have to give more information on the kind of crane and where it will be used.
- Q:In order to ensure the stability of tower cranes, generally along the height of the tower and building a number of meters attached
- Self lifting tower crane tower 45 meters high to prevail, such as height of over 45 meters, each increased to 10 meters (less than 5 meters, excluding) demolition costs increase 20%, off-site transportation costs increased by 10%.
- Q:What is the calibration value of a tower crane?
- Do you mean the calibration value of crane lifting moment? That should be the product of the maximum magnitude of the tower crane and the corresponding maximum lifting load.
- Q:I'm getting a tattoo of a paper crane in about 2 weeks because to me it symbolizes creativity and an artistic talent. I dont want it to look like any other paper crane tattoo though and I have been having issues coming up with a small design to add into the tattoo. I have always loved art but will unfortunately will not be continuing my education of it because it is very difficult to get a job in the art field.All in all, i'm looking for help for adding a design in the paper crane tattoo that will represent the artist that I am.
- Hey okorder / I reckon the Japanese tradition would really suit this style because of the crane is a Japanese form of art. I do give you permission to print out this piece and work with it as this is only a basic sketch and ive stuffed up a lot of the detail as I forgot it would be easier for you with just an outline also the top flower may need re-doing. I hoped I helped.
- Q:hi, i was just looking for a guide to change a full stock to a crane stock on an m4, (its wired to the back)i dont actually have the gun yet im buying it from a freind, so i havnt had a chance to look at it but the the gg gr16-r4i was wondering if its just a m4 with a stock that is wired to the back, how there is the two long screws that run from the back of the buffer tube to the body, then you just switch it out for a crane stock...anyway anything would be great, thanks
- you need a crane stock and a buffer tube for it. the full stock does not use a buffer tube. you simply guide the wires through the buffer tube (once you attach it to the back) and into the stock. then just pu the stock on and put the batteries in and viola! crane stock!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
FHTT2800A Tower Crane
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords