Nut coke of phosphorus 0.045
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Metallurgical Coke of Nut coke of phosphorus 0.045 Description：
Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.
Sulfur content in coke: sulfur is one of the harmful impurities of iron smelting, it lower the quality of cast iron.The sulfur content in pig iron for steel making is more than 0.07% for the trash.By the blast furnace burden into furnace sulfur 11% came from the ore;3.5% from limestone;82.5% from coke, so coke is the main source of sulfur in charge.Coke sulfur content directly affect the blast furnace ironmaking production.When coke sulfur content is greater than 1.6%, sulfur, every 0.1% increase in coke consumption increased by 1.8%, increased by 3.7%, for the amount of limestone ore content of 0.3% by 1.5 - a 0.3% increase in the blast furnace production. The sulfur content of metallurgical coke is not greater than 1%, large and medium blast furnace using the sulphur content in metallurgical coke is less than 0.4-0.7%.
2. Main Features of the Metallurgical Coke of Nut coke of phosphorus 0.045：
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. Metallurgical Coke of Nut coke of phosphorus 0.045 Images:
4. Metallurgical Coke of Nut coke of phosphorus 0.045 Specification:
Parameters | Guarantee | Rejection |
Total Moisture (As received basis) | 5% max | |
Ash (dry basis) | 12.5% max | > 13.5% |
Volatile Matter (dry basis) | 1.5% max | > 1.8% |
Sulphur (dry basis) | 0.65% max | > 0.75% |
Phosphorus (dry basis) | 0.035% max | > 0.045% |
M10 | 7% max | > 9% |
M40 | 84% min | ＜82% |
CSR | 65% min | ＜63% |
CRI | 25% max | > 27% |
Size 30-90 mm | 90% min | |
+90 mm | 5% max | > 8% |
-30mm | 5% max | > 8% |
5. FAQ
Coke ash content: coke ash content on the influence of blast furnace smelting is very significant.Coke ash content increased by 1%, the coke rate increase 2-2.5%, therefore, lower coke ash content is very necessary.
- Q:What is the difference between the industrial analysis of coke and the industrial analysis of coal samples
- Coke GB/T 1996-2003, volatile coke is the most difficult to do
- Q:How long should it be to store coke in the open air
- So, in addition to avoid rain and direct sunlight, ventilation is.Coal and coke stored in an airless environment, a large degree of risk. The temperature is too high or spontaneous combustion has been easy to stuffy.
- Q:Coke indicators are divided into grades
- The index of pore structure is mainly expressed by the porosity rate (the percentage of the total volume of coke), which affects the reactivity and strength of coke. Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%. Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength
- Q:What are the requirements for the quality of coke in blast furnace smelting
- Different uses of different coke porosity index requirements, the general requirements of metallurgical coke porosity in the 40 ~ 45%, 35 ~ 40% in coke, coke export demand in about 30%.Coke crack degree and the porosity level, and the coking coal has a direct relationship, such as coal based coke refining, crack, high porosity, low strength; with coal as the foundation of the coal refining coke crack less, low porosity and high strength. The strength of coke is usually represented by two indices of crushing strength and abrasion resistance. Coke crushing strength refers to coke can resist foreign impact force without ability along cracks or defects at the broken, represented by the M40 value; wear strength of coke coke refers to the ability to resist external friction without surface of glass forming debris or powder, said M10. The cracking degree of coke affects the M40 value of its breaking strength, and the pore structure of coke affects the M10 value. There are many methods for determination of M40 and M10 value method, commonly used in our country the German migon drum test.
- Q:F.C Ash S V.M H2O SizeMore than 85 less than 15 less than 8 less than 0.8 less than 1.5 10-70mm over 90%,I would like to ask, what is the size of the corresponding coke? Metallurgical coke or something else, there is no relevant information about, thank youF.C = 85, Ash = 15, H2O = 8, S = 0.8, V.M = 1.5, Size:10-70mm 90% and above, so clear, like the product, the current price?
- Two metallurgical coke: fixed carbon 84.5-85%; calorific value 7000cal/kg; ash < 13.5%; volatile < 1.9%; all 6% "0.7%" water; sulfur;
- Q:Which heroes know, please give the source of the data.
- From the production equipment and technology of the popular view, a ton of coke oven gas produces about 400 cubic meters, of which about 200 cubic meters of coke oven returned through the pipeline used for coking heat source, the remaining more than and 200 cubic meters was emptying, "or the lantern".
- Q:How to calculate the average particle size of coke
- Introduction of a commonly used, called "surface area volume average diameter", abbreviated D (3,2):D (3,2) = 1 / (fVI (/DI)).
- Q:Types of coke and use of coke
- China's coking industry has been formed with conventional machine coke oven blast furnace ironmaking production of metallurgical coke, with heat recovery coke oven production machinery foundry and foundry
- Q:The chemical composition of coke m10.m25 refers to?
- The physical properties of coke and its chemical composition are mainly determined by the type of coal used and the coking process
- Q:How to distinguish the level of coke. What is metallurgical coke
- Since more than 90% of metallurgical coke is used for blast furnace ironmaking, it is often referred to as coke. Other more specific can see here:
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Nut coke of phosphorus 0.045
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
