Carton erector(Hot melt glue)
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description:
1.Performance parameter:
1.1Capacity: 28cpm
1.2 Carton size(L*W*H): 140mm×140 mm×150mm(MIN) 500mm×400mm×420mm(MAX)
1.3 Machine size: 3000*2100*1600(L*W*H)
1.4 Weight: 1.7T
1.5 Noise:≤85dB
1.6 Breakage: ≤0.2%
1.7 Main power: 3Ph AC 380V±5% 50Hz
1.8 Operating power:DC24V
1.9 Total power: 5.5kW
1.10 Compressed air: 0.5~0.8MPa
1.11 Valve pressure: 0.4MPa
1.12 Glue temperature: 170℃
1.13 Operator: one
2.Working principle: Open the semi-manufactured carton into square space by vacuum suction of mini cylinder and finalize the design which needed. The couple foldouts are unfolded by two unfolding cylinder and unfolding arms. The spraying glue valve and spraying glue photoelectric cell control the glue spraying. Then the two side foldouts are folded. It can turns to the next working procedure after pressing the carton by cylinder and pressing carton units.
3. Equipment Composition:
Framework of Machine
Only a speed grade of the main drive (1 speed)
The lower cutting plate of the pusher storage rack is removed
The manual adjustment device is used for folding cartons of different sizes
Folding Station and Gluing Station
The pressing station is equipped with transmission parts
The safety device is assorted with side sliding door and hanging door
Pneumatic Equipment
Vacuum System
Hot Glue System
The lupication bearing with a long service life, other lupicating points are grouped at a lupication terminal (except for adjusting)
Electric Equipment:
-The control cabinet is installed on the machine
-Built-in Operating Table
Additional or Optional Equipment:
Automatic stack feed is featured by 90-degree stacking preparation.
Cold Glue System
Independent Control Cabinet
Rotating Console or Independent Station
Centralized Lupication System
By virtue of frequency converter, speed can be gradually regulated (as requested)
Automatic speed control system depends on the blocking degree of carton.
. Equipment Composition:
Framework of Machine
Only a speed grade of the main drive (1 speed)
The lower cutting plate of the pusher storage rack is removed
The manual adjustment device is used for folding cartons of different sizes
Folding Station and Gluing Station
The pressing station is equipped with transmission parts
The safety device is assorted with side sliding door and hanging door
Pneumatic Equipment
Vacuum System
Hot Glue System
The lupication bearing with a long service life, other lupicating points are grouped at a lupication terminal (except for adjusting)
Electric Equipment:
-The control cabinet is installed on the machine
-Built-in Operating Table
Additional or Optional Equipment:
Automatic stack feed is featured by 90-degree stacking preparation.
Cold Glue System
Independent Control Cabinet
Rotating Console or Independent Station
Centralized Lupication System
By virtue of frequency converter, speed can be gradually regulated (as requested)
Automatic speed control system depends on the blocking degree of carton.
- Q:Food sterilization with high-temperature sterilization pot or microwave sterilization equipment is good?
- The food sterilization is almost a mouse, I feel are heat treatment technology, both are selected is not repeated, please food people up to help answer, grateful.
- Q:Ozone disinfection of water treatment equipment and the difference between UV disinfection
- In the water treatment equipment in the raw water after treatment, if it is to achieve drinking water
- Q:What is the flexible container seal?
- ② plastic film bags and composite film bag sealing device: with a good thermoplastic plastic bags or composite bags, generally used in the sealing at the direct heating and mechanical pressure, so that sealing fusion.
- Q:Sterilization equipment saves energy
- Conventional thermal drying, sterilization is from the surface of the material, and then through the heat conduction to the material inside.
- Q:What is the principle of scale and descaling?
- As the calcium and magnesium ions precipitate from the water, the water will return to the highly dissolved state (the water itself is a high-solubility liquid, but will be saturated due to the absorption of other substances), when the return to high dissolved water flow through the scale of the pipeline,
- Q:Suspension (material) filtration characteristics
- For less than 20% of solid particles with a small particle suspension filter, you can use plate cabinet filter press or pressure blade filter.
- Q:What is the atmospheric filling machine?
- Is in the atmospheric pressure by filling the liquid weight.
- Q:Direct drinking water equipment how to disinfect raw water disinfection
- In order to make the whole disinfection process more stringent.
- Q:What is the heat sealing method of hot pressing sealing machine?
- Hot-press sealing machine refers to the way of sealing the packaging container with heat sealing.
- Q:Failure Analysis of Sealing Machine
- Seal is not strong is one of the common failure of the sealing machine, sealing is not strong with three meanings: ① packaging bags can not be sealed
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Carton erector(Hot melt glue)
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products