Alu plate with 5 bars pattern
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Aluminium is a relatively soft,durable, lightweight, ductile and malleablemetal with appearance ranging from silvery to dull gray,depending on the surface roughness. It is nonmagnetic and does not easilyignite. A fresh film of aluminium serves as a good reflector (approximately92%) of visible light and an excellent reflector (as much as98%) of medium and far infrared radiation. The yield strength of pure aluminium is 7–11 MPa,while aluminium alloys have yield strengths ranging from200 MPa to 600 MPa. Aluminium has about one-third the density and stiffnessof steel. It iseasily machined,cast, drawn and extruded.
Alu Plate
Aluminum trade plate have great suctility,heat conductivity, anti-corrosion and moisture resistance properties.
Alloy: AA1050,1060, 1100, AA3003, 3005, 3015, 5052, 5754, 5083,8011, etc
Temper: H14/16/18/22/24/32,HO etc.
Thickness:0.2mm—100mm
Width:100mm—2300mm (Can be slitted)
Application:
Anti-sliperypurpose in vehicles, packing and appliance, decorative purpose
Features:
1. Excellent quality of products
2. Quick delivery
3. Best service to clients
4. BV,SGS avalible
5. No buckle o waveness
6. Tension leveling
7. Certificate of Origin
8. Form A,E
Packaging Detail: Carton ,Wooden pallet with plastic protection packing,standard seaworthy packing or as your request.
ProductionCapacity:
AnnualProduction capacity of 600,000 tons.
Products areexported to United States, Canada, U.A.E, Brazil, Mexico,Thailand, Vietnam,Nigeria etc, over 100 countries andregions all over the world.
Coveredfactories with full production line
CNBM aluminumproduction base is comprised of 18 aluminumannealers, 10 coil and foilmills, 4 continuous production lines, 2hot rolling production line and 3prepainted lines.
FAQ:
1. What is the form of payment?
Normally 30% TT, L/C
2. Type of quotation?
FOB, CFR, CIF
3. Port of loading?
Shanghai port
4. Delivery time?
30 day after client’s deposit
- Q:Are the aluminum sheets suitable for manufacturing automotive chassis?
- Yes, aluminum sheets are suitable for manufacturing automotive chassis. Aluminum is a lightweight and strong material, making it an ideal choice for constructing automotive chassis. It offers several advantages such as improved fuel efficiency, better handling, and increased structural rigidity. Aluminum's ability to absorb and dissipate impact energy also enhances passenger safety. Additionally, aluminum is corrosion-resistant, which helps prolong the lifespan of the chassis. Overall, using aluminum sheets in the manufacturing process of automotive chassis provides numerous benefits and is a suitable choice for this application.
- Q:What are the different methods of surface preparation for adhesive bonding of aluminum sheet?
- To ensure a strong and durable bond between the adhesive and the aluminum surface, various surface preparation methods are available. One commonly used method is mechanical abrasion, where the surface of the aluminum sheet is roughened using abrasive materials like sandpaper or wire brushes. This creates a textured surface that enhances adhesive adhesion. Chemical etching is another option, involving the treatment of the aluminum surface with a chemical solution to eliminate any oxide layer and establish a clean and reactive surface. Depending on the adhesive's specific requirements, acids or alkalis can be utilized for this purpose. For adhesives that necessitate a contaminant-free surface, solvent cleaning can be employed. This process involves the use of solvents like acetone or isopropyl alcohol to eradicate grease, oil, or dirt from the aluminum sheet's surface. In addition to these techniques, specialized methods like anodizing and chromate conversion coating can also be utilized. Anodizing entails the creation of a thick oxide layer on the aluminum surface through an electrolytic process, thereby improving bonding properties. On the other hand, chromate conversion coating involves treating the aluminum surface with a chemical solution containing chromates, resulting in the formation of a protective layer that enhances adhesion. Ultimately, the selection of a surface preparation method depends on the adhesive's specific requirements and the desired bond strength. It is crucial to carefully choose and follow the appropriate method to successfully bond aluminum sheet with adhesive.
- Q:What kind of paint would you like to paint on the aluminum plate?
- Paint on the aluminum plate should be painted nitrocellulose or polyester paint.Is the aluminum plate with a thickness of more than 0.2mm to 500mm, 200mm width, length less than 16m aluminum material called aluminum plate or aluminum sheet, aluminum is below 0.2mm, 200mm within the width of the row material or bar (of course, with the progress of the large equipment, the width can be 600mm row material also more). Aluminum sheet refers to the rectangular plate made of aluminium ingot rolled and divided into pure aluminum plate, alloy aluminum plate, thin aluminum plate, middle thick aluminum plate and pattern aluminum plate.Nitrocellulose lacquer is a common paint for woodwork and decoration. The main film forming material is mainly to nitrocellulose lacquer, with alkyd resin, rosin modified resin, acrylic resin, amino resin and other resin composed of hard and soft.Polyester paint, also called unsaturated polyester paint, is a kind of multi component paint, it is a kind of thick paint made of polyester resin as the main film forming material. Polyester paint film fullness, thick hard surface. Polyester paint also has varnish varieties, called polyester varnish. Polyester paint needs to be solidified during construction, and the proportion of these curing agents takes up 1/3 of the total paint. These curing agents, also known as curing agents, are mainly composed of TDI (toluene diisocyanate, /toluenediisocyanate). These free TDI will turn yellow, not only to make furniture paint yellow, but also will make the adjacent wall yellow, this is a major shortcoming of polyester paint.
- Q:Are 101 aluminum sheets suitable for heat exchangers?
- 101 aluminum sheets are not appropriate for heat exchangers. Heat exchangers necessitate materials that possess commendable thermal conductivity and corrosion resistance. Although aluminum is an adept heat conductor, the 101 aluminum alloy lacks the essential corrosion-resistant properties essential for heat exchangers. Heat exchangers often employ other aluminum alloys, such as 3003 or 5052, due to their superb thermal conductivity and corrosion resistance.
- Q:What is the fatigue strength of 101 aluminum sheets?
- The fatigue strength of 101 aluminum sheets refers to the maximum stress level that the sheets can endure without experiencing fatigue failure. The fatigue strength of a material is typically determined through fatigue testing, where the material is subjected to repeated cyclic loading until failure occurs. However, it is important to note that the fatigue strength can vary depending on a range of factors such as the sheet's thickness, surface condition, heat treatment, and other mechanical properties. Therefore, without specific information on these variables, it is not possible to provide an accurate value for the fatigue strength of 101 aluminum sheets. To determine the fatigue strength of 101 aluminum sheets, it is recommended to consult the material's technical datasheet or reach out to the manufacturer or supplier for specific information. They can provide details on the fatigue properties, including the endurance limit or the stress level at which the material can withstand an unlimited number of cycles without fatigue failure.
- Q:How do aluminum sheets perform in terms of dimensional stability?
- Aluminum sheets generally exhibit good dimensional stability due to their low coefficient of thermal expansion, meaning they are less likely to warp or deform when exposed to temperature changes compared to other materials.
- Q:For my chem class that I just barely started taking, we're making bohr models. Even though my teacher explained it, I still dont get the concept of it all, like how the protons are lined up in their inner circle and the outer circles. I get everythign else about atoms except how they're actually made up lol. Maybe someone on here can explain it to me? I hope so because i have to make a model for it for friday.The element I'm asigned is aluminum btwYour help is greatly appreciated!
- This Site Might Help You. RE: Bohr Model?! Aluminum? For my chem class that I just barely started taking, we're making bohr models. Even though my teacher explained it, I still dont get the concept of it all, like how the protons are lined up in their inner circle and the outer circles. I get everythign else about atoms except how they're...
- Q:Does anyone know anything about the value of aluminum can(beer, soda, etc.) pull tabs? I have heard a rumor that the tabs are worth more than the cans and that a gallon jug of tabs can be sold at recycling centers for several hundred dollars.Anyone know if this is really true?
- Sept 2014 Update. Aluminum recycle rates continue to be low in comparison to other metals, about 85 cents per pound. 2,000 tabs are worth about $1. A gallon (approximately 4,000 tabs) is worth about $2. The effort needed to collect that many tabs isn't well rewarded. There is no special value for the pull tab - it is simply aluminum. The entire can has more than 100 times the aluminum as the tab itself. While it takes less room, recycling just the tab and throwing away the can doesn't make any sense and isn't worth the time or effort. While they are accepted at charities like the Ronald McDonald House, you are likely to spend more on gas driving them there and would pay approximately twenty times their value in postage if you mail them. Some craft projects use tabs, if you find someone or a group who does this they may give you more than the metal value. Purses made out of pull tabs are somewhat popular. My suggestion - if you recycle - great! Recycle the whole can and realize that you are not going to get yourself or a charity rich because aluminum isn't worth a lot. You are helping the environment though. Take the entire can and any other metal you want to recycle to a local recycler and donate the proceeds however you wish.
- Q:Cooks are warned not to use aluminum cookware when preparing acidic foods. Why?
- Plain okorder /... Hope this helps.
- Q:Calculate the mass in grams of Iodine (I2) that will react completely with 20.4 g of aluminum to form aluminum oxide (AlL3)
- actually the guy before me did it right but made a mistake at one point 0.07 mole is the # of moles of Al which needs to be changed to moles of product, and then back to find mole of iodide. once thats found then you can use the MW to change it to grams.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Alu plate with 5 bars pattern
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords