Multi-purpose Small Mini CNC Milling Machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
1.the structure use the high toughness,high iron manufacturing2.three axis are installed linear guide rail
3.CE certificated
A. Features
1.Main structure of lathe bed and column adopt reasonable
Fabric reinforcement to enhance against earthquakes.
2. Can not be out of shape and chip removal is fluent..
3. Three axis are installed linear guide rail,to maintain high precision
under highspeed operation for a long time.Fast moving shortens the
positioning time and increase productivity.
4.The structure of a precision pressure equipment is connected with the
automatic lubrication device,use the special bearings which are used for ball
screw,ensure that the positioning accuracy and the contour control accuracy
and mobile shaft rigidity.
5.Three axis are servo feed axis,spindle servo spindle with rigid tapping function,
to improve the machining accuracy,to reduce processing time and improve productivity.
6.You can choose the CNC controler system for the machine
B. Product Overview
1,The overall structure use the high toughness, high iron manufacturing,and after a
highly efficient annealing heat treatment,it effectively eliminate material internal stress,
to ensure the precision of the best stability and durability.
2,Stand column design is big span, it has high rigidity and high stability. It connected to
a strong, stable large casting lathe bed,to ensure the accuracy of the machined part and precision.
3,Counterweight system behind the stand column, and it has biaxial oriented, so the spindle
box cutting move more smoothly,effectively restrain the negative effects of vibration,to ensure
the requirement of accuracy.
4,Three axis use the P3 precision ball screw,cooperate with double nuts washers preloaded,
eliminate back lash in advance,to achieve high stability of positioning accuracy and repeat precision.
5,Three axis machine tool are installed high precision linear rolling guide,to ensure the high
precision of processing, meanwhile increased the speed of fast forward.
6,Three axis feed driven use servo motor and screw straight league,transmitting stable, and
no back lash.And it has good rigidity and damping performance,greatly improved the dynamic
rigidity of transmission system
7,Precision highspeed spindle unit and AC servo motor connected through the synchronous belt ,
low noise, little vibration, low calorific value.Available for milling, drilling, reaming, boring, ream,
tapping and other processing.
8.Column Z axis has large travel (up to 500 mm), so that the processing of high workpiece no
need to be on large machine tools, and at the same time leaving enough space for adding 4th
axis etc.
9.Sheet metal integration design, comprehensive protection, good integrity, high impermeability.
Open sliding door design, more convenient for loading and unloading workpieces.
C.Specification
Model | M400 |
Table size (mm) | 760×210 |
T-Slot | 14×3×63 |
Max load (kg) | 200 |
Travel of X axis (mm) | 400 |
Travel of Y axis (mm) | 230 |
Travel of Z axis (mm) | 500 |
Distance from spindle nose to table (mm) | 110-610 |
Distance from spindle center to column (mm) | 320 |
Spindle Taper | ISO30 |
Spindle speed(rpm) | 6000/8000/10000 |
Mpa | 0.6 |
Spindle servo motor power(kw) | 2.2 |
Spindle motor torque (Nm) | 27 |
X/Y/Z axis servo motor torque (mm) | 4 |
X/Y/Z axis Max feeding speed (mm/min) | 5000 |
X/Y/Z axis Max fast moving speed (mm/min) | 12000 |
Coolant pump power (w) | 120 |
Rated flow (L/min) | 25 |
CNC Controller | SIEMENS 808D |
Positioning accuracy (mm) | ±0.012 |
Repeating accuracy (mm) | ±0.006 |
Net weight/ Gross weight(kg) | 1150/1250 |
Packing size (mm) | 1460×1940×2180mm |
D.Standard configuration
Security locks, lubricating system, cooling tank and dust pans, operation indicator light (red,
yellow, green), working lamp, air gun, toolbox 1 set , instructions 1 set , a set of eight knife.
Optional configuration
Vertical milling cutter bar BT30, quickchange drill collet BT30, spring collet milling cutter
bar BT30, Taper-shank reduction sleeve BT30,
Facemilling cutting rod BT30, Pneumatic rivet, precision mold clamp, suit spring collet CNC
dividing head (four axis)
Whirling samples show:
- Q:CNC lathe with CNC punch there are some differences between CNC machine tools ah
- Early CNC system is composed of hardware circuit called hardware NC (Hard NC), after the 1970s, the hardware circuit components gradually replaced by a dedicated computer called computer numerical control system, usually using a dedicated computer and with an interface circuit,
- Q:The story of the lathe
- During the Eastern Jin Dynasty, Xi Kam Wu will be committed to rebellion, made great merit, was called "Qiu". In the court in addition to the prime minister prime minister Wang, the number of his military attache.
- Q:Why should the lathe drive
- 2, with the horizontal milling, the knife row (also called the arbor) always radial runout, which will cause the disk cutter in the rotation when the actual size of the turn; disk cutter in the installation can not guarantee completely with the spindle
- Q:What is the meaning of tool compensation in CNC lathe programming?
- In the knife, press the "knife" button, is to tell the computer, the knife (X, Z) position; the system will remember that in the future operation, the knife in any position associated with this.
- Q:Lathe and lathe workers is not a meaning
- Work location arrangements are good or bad, not only affect the level of productivity, but also on physical exertion also has a great relationship.
- Q:What is the difference between the so-called fine car and rough car?
- Is the processing of rough processing processes, mainly the workpiece surface of the excess material cutting, the general size of the product,
- Q:What is the relationship between surface roughness and machining methods in lathe processing?
- Based on the toning material of ferrous metal:
- Q:The middle of the lathe becomes smaller
- Small trailer inclined oblique strip adjustment, fine car cone margin 0.5 mm
- Q:Please describe the composition and function of the C6150 lathe
- The smooth running of the spindle on the bearing directly affects the machining quality of the workpiece. Once the spindle rotation accuracy is reduced, the machine's use value will be reduced. Feed box: also known as the walking box
- Q:What is the lathe tray?
- Strictly speaking, the lathe is also equipped with a "trailer" (which can be moved radially), and a "small carriage" and a turret are mounted on the carriage.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Multi-purpose Small Mini CNC Milling Machine
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords