Outdoor deck
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
outdoor wpc decking supplier, china factory, Engineered Flooring Type
1Low maintenance
2Widely used indoor and outdoor
3Cert
outdoor wpc decking supplier, china factory, Engineered Flooring Type
1Low maintenance
2Widely used indoor and outdoor
3Certificated
Specification of outdoor wpc decking supplier, china factory, Engineered Flooring Type
1) Elegant nature wood grain texture and touch
2) Eco-friendly, high-recyclable, green material
3) No cracking, warping, and splitting
4) Water/Moisture-proof, Corrosion-resistant
5) Low maintenance and no painting
6) Easy to install, clean
7) Weather resistant, suitable from -40 to 60
8) High degree of UV and color stability
Item | outdoor wpc decking supplier, china factory, Engineered Flooring Type |
Size | 150*25mm,146*32mm,142*35mm,140*40mm,140*25mm,135*27mm etc. |
Length | As your choice |
Color | black, coffee, brown, gray, white ,redwood etc. optional |
Surface | Smooth,Brushed,Scratched,Grain&Sanded optional |
Component | 50% wood fibers +45% HDPE+ 5% chemical additives |
Warranty period | 15 years |
Certificate | CE,ISO,FSC,SGS |
Packages | PE Film+WPC Pallet(length of 0-2.2m)+Wood Pallet(length>2.2m) |
Applications | Garden,Lawn,Balcony,Corridor,Garage, Pool&SPA Surrounds,Boardwalk,Playground |
This type can be used in outdoor ground, trestle road and garden path, enjoying great superiority in the outdoor decking of courtyard, park, garden community, waterscape, trestle and plank road,etc
Pictures:
Color:
Material
- Q:It feels like sleeping in a bowl of rice crispies. At least with the matress it just sinks through the material. Anyone else have this problem?
- Are you a bedwetter? Why are you sleeping with plastic sheets? No.
- Q:Are plastic sheets resistant to discoloration from humidity?
- No, plastic sheets are not completely resistant to discoloration from humidity. High levels of humidity can cause certain types of plastic sheets to absorb moisture, leading to discoloration and even the growth of mold or mildew. However, some plastic sheets are specifically designed to be more resistant to humidity and discoloration, so it depends on the type and quality of the plastic sheet being used.
- Q:The plastic board is brittle at low temperature
- Plastics are polymer materials at room temperature showed a hard and tough, in higher temperature conditions will exhibit toughness even elasticity, once the temperature is reduced to below the glass transition temperature or brittle point, will show the fragility of.
- Q:Can plastic sheets be used for sneeze guards in restaurants?
- Yes, plastic sheets can be used for sneeze guards in restaurants.
- Q:So I went to staples and had them laminate like 8 papers I HAVE to have laminated by tomorrow.... And I picked them up, came home, and they were literally my papers stuck between 2 plastic sheets. I can peel it easily and it is not sticking at all. Am I supposed to do something or did they mess up and forget something???? Please help!!!!
- It sounds like they messed up. My guess is that the machine was not hot enough to allow the laminate sheeting to bond. Yes, you should call them and go back. Laminating IS two plastic sheets with a paper between. However, when the machine is very hot, the plastic softens and bonds. Did you trim the papers? You should always leave a narrow edge of plastic around the edges, perhaps a quarter inch. If you trim it exactly against the paper, there is nothing on the edge to seal and bond. If they did the trimming, then check the edging. If there is a quarter edge beyond the paper and it is separating, then take it back. That could be a machine not hot enough. Take your receipt.
- Q:How to flatten a bent plastic sheet?
- PC plastic molding it humidity at 230-320 degrees Celsius, the impact of high strength material properties, good dimensional stability, colorless transparent, good coloring, electrical insulation, corrosion resistance, good wear resistance, but self-lubricating, have a tendency to stress cracking, high temperature hydrolysis, the above performance base, only to PC the plastic is heated straight after compaction cooling. I hope I can help you.
- Q:Are plastic sheets resistant to yellowing or discoloration?
- Yes, plastic sheets are generally resistant to yellowing or discoloration.
- Q:I usually sleep under a little tent sort of thing made out of tarp tied to stakes and trees and whatnot so that it resembled a sort of elongated prism. Anyway i used to have a big roll of heavy duty plastic sheeting. I would take like a 5x10 foot sheet of the stuff and tie the ends together so that it kind of resembled a piece of candy but was open in the middle so i could put my pad down and sleeping bag down inside and sleep inside it. I would do this because when the rain comes, none would get in from above but sometimes water would run underneath so I developed this canoe idea. Anyway I'm out of plastic sheeting and I forget where i bought it from. Can someone help?
- Home depot. Lowes. any construction material yard
- Q:Anyone used these? I want to try them. . .but just do not understand if they actually work as good as THEY say. These are the plastic or rubber ones that are suppose to be the thing now. . .
- they are made of silicone. Silicone has a very high burning and melting temperature, and nothing will stick to it, making it a perfect substance to use in kitchens.
- Q:Can plastic sheets be used for mold-making in manufacturing?
- Yes, plastic sheets can be used for mold-making in manufacturing. Plastic sheets are commonly used as mold-making materials due to their flexibility, durability, and ease of shaping. They can be easily cut, shaped, and formed to create custom molds for various manufacturing processes. Additionally, plastic sheets are cost-effective and readily available, making them a popular choice for mold-making in manufacturing industries.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Outdoor deck
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords