2Ft 3Ft 4Ft 5Ft Certificate Led Tube Factory Tuv Tube8 Led Light Tube
- Ref Price:
-
$5.00 - 20.00
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 100000 Pieces pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
LED Tube/ tube led lighting
power: 9w 12w 15w 18w 22w 24w
size: 1ft 2ft 3ft 4ft 5ft
Feature
(1).CE/FCC/ROHS/LVD approved
(2).Led light source:super bright SMD3528
(3).Long lifetime:50,000 hours
(4).High efficiency,competitive price
(5).Energy saving:up to 80%
(6).Input Voltage:AC110V &220V
Led tube/led tube light parameters
led tube/led tube light
VT1801
Parametersvt1801 | |
(Input Voltage) | AC110V & 220V |
(Power consumption) | 18W |
(Length of Tube) | 120CM |
(LED efficiency) | 110LM/W |
(LED Type) | SMD3528 |
(LED quantity) | 300pcs |
(LED Color) | white |
(Color Temperature) | 5700~6300K 2800~3500K |
(Lumimous Flux) | 1800-1900Lm |
(Work Frequency) | 50-60HZ |
(Viewing Angle) | ≥120Degrees |
(Power factor) | ≥90% |
(Operating lifespan) | 50,000hours |
Benefits of Led tube/led tube light :
1.Solid-state,high shock/vibration resistant
2.No RF interference,No buzzing noise
3.No fluorescent flickering
4.No hazard of mercury or lead entering the environment
5.No danger of broken glass
6.Maintenance free,easy installation
7.Long lifetime,50,000+hrs(5+years)
8.Low power consumption,high intensity
Applications of Led tube/led tube light :
1.Instreading of indoor celling light
2.School/university/hosipital
3.Conference/meeting room/show room
4.Commercial complex
5.Factory/office
6.Supermarket
7.Rsidential/insititution buildings
8.Bus,shuttle,railcar passenger interiors
9.Uninterrupted emergency lighting
10.Focused reading and task lighting
Led tube/led tube light introduction
Wanxy provides high quality T8 LED tube, which are the ideal replacement for your light system. Our T8 LED Tube series have the approvals of FCC, CE, and ROHS.
Higher brightness levels, greater efficiency & energy saving levels, thus reducing carbon footprints & ruducing energy costs.
Energy-efficient T8/bi-pin LED tube lights are the latest DaylightTube-replacement LED lighting products Rise-Lite announces in its green-technology lineup.
About us
we are a manufacturers of special produce led commercial light and led outdoor light,include led tube,led bulbs,led spotlight,led panel light,led celling light,led flood light,led underwater light,led underground lamp and so on
- Q:Can normal LED fluorescent tubes be used in a vacuum?
- Both kinds of light-emitting device itself can be used in vacuum environment. But they alone is difficult to work and need to match the other electronic components and circuit, LED to match driver circuit (); Fluorescent lamp or fluorescent lamp should match the inductance ballast or electronic ballast circuit components, such as ability to work, some of these additional circuits and components can work in a vacuum, some components may not be suitable for vacuum work, some will spread in a vacuum, could destroy the vacuum environment, some hot components in a vacuum, also not easy heat dissipation
- Q:How does the energy-saving lamp tube set quota
- Energy-saving lamps usually refer to the light source (bulb) as a light source for energy efficiency, as for what quotas to set, and what kind of lamps the source is used for.
- Q:How many leds will be able to reach the 30W T8 lamp?
- The fluorescent lamp is usually 45LM/W but half of the light is an invalid LED flashlight which is about 85LM/W.
- Q:What are the details of the whole process of the LED lamp?
- When applying CE certification of LED lamp tube, special attention should be paid to the lamp size and the length of the lamp tube, because it involves the driving mode of the working module, and it is not good to change it wrong.
- Q:The LED fluorescent lamp tube breaks the LED light in the inside
- If this is not bad, then look back, there should be a small power supply at the end of the aluminum plate, and the other end of the power supply is 220V. Another possibility is that lower-end LED products will be blocked (non-isolated). Is the aluminum substrate in addition to the SMT chip, also some electronics posted above, if the aluminum board intact, you also to the end, one 220 v mains interface on both ends
- Q:Now there is no led lighting, just like the fluorescent light bulb, which is universal
- Yes, it is installed directly on the original lampstand, remove the regenerator.
- Q:What is the connection of the LEDT5 lamp tube, the main line is how to connect, only to the end
- 1, the installation: The LED comes with a constant current source, which does not require a ballast and a regenerator. General T8 lamp tube because the lamp tube space is big enough, constant current source can be installed in the lamp tube. So, when installing, you can remove the ballast from the original frame and remove it, and install it directly. T5 fluorescent lamp, T4LED because tubes is very small, not put constant current source, can only be constant current source in a scaffold, so, T4 / T5 general manufacturers are doing, will deploy stents, stent in persistence current source, and the lamp installation direction of the. The direction is reversed, the lamp is not bright. We are considering adding some switching circuits to allow the lamp to work properly even if the lamp is in reverse. Voltage: to communicate 85V -- communicate 245V, all can work normally. However, the long-term voltage is too high or too low, which can affect the power factor of the constant current source, which means that the effect of energy saving will be slightly affected. At the same time, it can also affect the lifetime of the constant current. So, want to choose the fluorescent lamp that is appropriate voltage commonly.
- Q:How did the new daylight tube ring
- It's a light tube problem, but it doesn't matter, you don't want to worry about him in a few days.
- Q:What about the quality gap between leds?
- This one, you may want to consult a professional, I know that so much
- Q:Now the home decorates is to use LED good or the good of the lamp tube
- Lamp tube installation is convenient, cheap; LED installation is a little bit of a hassle, but it's much more beautiful, durable, long-lasting and saves electricity
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
2Ft 3Ft 4Ft 5Ft Certificate Led Tube Factory Tuv Tube8 Led Light Tube
- Ref Price:
-
$5.00 - 20.00
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Piece pc
- Supply Capability:
- 100000 Pieces pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
