High Quality Dimmable Led Spot Light
- Loading Port:
- Shanghai
- Payment Terms:
- T/T
- Min Order Qty:
- 10 Pieces pc
- Supply Capability:
- 20000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Quality Dimmable led spot light
LED Spot Light & MR16 E27/GU10 4 W Soptlight Specifications
Parameters | GU10/E27/E14 | MR16 | |
Working Voltage | AC85-265V | AC/DC12V-24V | |
working Frequency | 50/60HZ |
| |
Actual Power | 4 W | ||
LED Working Current | 300-320mA | ||
Power Factor | 0.5 | - | |
Power Efficiency | 70% | 92% | |
Power Supply Type | Build-in isolated constant-current driver;dimmable/non-dimmable (optional) | ||
Operating Temperature | -20°C-50°C | ||
Led Chip Brand | 4×1W; EPILEDS/Epistar/Bridgelux; 38mil / 45mil (optional) | ||
Material | aluminum profile led lamp cup + aluminum base LED PCB board + high light transmittance lens | ||
Base Available | GU10/E27/E14/MR16 (optional) | ||
Beam Angle | 30°/45°/60°(optional) | ||
Led Qty. | 4*1W | ||
Lens | frosted /transparent lens (optional) | ||
Color Temperature | Warm White:2800k-3500K; Pure White:6000K-7000k | ||
Luminous Flux | 320 LM | ||
Dimension | With GU10 Base:φ50×60mm With E27 Base:φ50×5 6mm With E14 Base:φ50×73mm With MR16 Base: φ50×54mm |
LED Spot Light & MR16 E27/GU10 4 WSoptlight Details
1. Energy Saving: Saving 80% more energy compared with traditional light source.
2. Long lifespan: More than 50,000 Hours Working Lifetime.
3. Eco-friendly: No harmful radiate spectrums such as UV or infrared ray included.
4. Cost saving: Low consumption of power and the rate of conversion is over 95%.
5. Breakage resistance: Solid LED light source and not easy to damage.
Applications
Apply to home, family house, warehouse, bathroom, kitchen, shopping mall, supermarket, exhibition hall, gymnasium and other similar places requiring lighting.
Features & Benefits:
1.Energy cost saving
For its higher luminous efficacy up to 80-100Lm/w, 60-70% energy cost saving compared to the traditional HPS Lamps.
2.Instant ON/OFF operation
This is one of the superior features of LED lightings.You don’t need to wait for any second.
3.Warranty Policy
3 years warranty with original written warranty ; 20,000 switch cycles(on/off switching).
4.Low Light Loss
The light source is the low light loss and high-bright LED, which the loss is less than 5% in 10,000 hours.The aluminum back-side housing performs an excellent heat dissipation,which guarantees a lower junction temperature of the LED,thus slow down light loss.
5.Environment-Friendly
While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Lead and Mercury.
6.High-brightness
Large--size square LED chip, and the light transmittance efficiency of the PC-cover can reach 95%.
7.Environment-Friendly
While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Mercury.
Recommended Applications:
1. OEM and ODM are availble.
2. Your inquiry will be replied within 24 hours by experienced staff.
3. Specific models with unique design can be done on demand and exclusively reserved to your distribution.
4. Detailled cooperation framework can be done case by case to preserve confidentiality and ensure long term partnership.
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By Sea | 30-40 business days |
1. 3-5 business days for Sample Orders; 7-15 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:Led lamp can use ordinary incandescent dimmers adjust brightness.
- LED to shoot the light, what do you mean low voltage 12 v or 230 v? If it is 12 v, with light dimmer is not enough, want to be in circuit transformer, otherwise it will burn. Instant connections, estimates that 99% is not enough, because want to let the LED MR16, MR11 shoot the light and the combination of dimmers + transformer matching without flashing, is a technical difficulties, and the head of the LED light source manufacturer will publish a and LED lamp dimmer and transformer matching brands, types and models of CRT, want to match all 100%, in the present on the earth is not human can do, see later, (want Daniel)
- Q:The sitting room how to shoot the light off?
- The removal of circular suck chandelier on the head: If bedroom absorb dome light is round, when removing the time to pay attention to. Step 1: turn off the ceiling lamp power, only turn off the power supply, to ensure the process of removal is safe. The second step: use a screwdriver slowly down the chimney of the iron ring around 3 small screw, then rotate until unscrewed the lampshade. Step 3: remove the light bulb.
- Q:How to change the condition of light change the color of the led lamp?
- Impossible, lying to you, the light is made up of a lamp holder and lamp, lamp can change, you change the colors of the lamp. You can ask the shopkeeper broken lamp
- Q:Led to shoot the light color temperature 3000 k what do you mean who knows
- Color temperature is the most common said light source spectrum quality indicators. Generally expressed in Tc. Color temperature is defined in absolute blackbody, absolutely blackbody radiation and light radiation in the visible area all at the same time, the temperature of blackbody is called the color temperature of light source. Low color TPS source is characterized by energy distribution, relatively more red radiation, commonly referred to as "warm light"; Color temperature increase, energy distribution, the proportion of blue radiation increases, often referred to as "cold light". Some commonly used color temperature of light source are as follows: standard candle is 1930 k (kelvin temperature unit); Tungsten is 2760-2900 k; Fluorescent lamp is 6400 k; Flash is 3800 k; At noon the sun is 5000 k; Electronic flash light for 6000 k; The blue sky is 10000 k.
- Q:What is the main purpose of LED to shoot the light? What is the difference between it and the ball lights, mainly performance and USES.
- Shoot the light is mainly to strengthen lighting In order to highlight, bright-coloured Shoot the light is small Angle The ball bubble lamp is mainly used for lighting, also can do canister light source
- Q:What the difference between LED downlight and LED lamp?
- LED lamp is embedded in the ceiling or wall, general lighting products is a kind of highly concentrated, usually it's light to the specified target position. Through light is used to emphasize important points. When working, due to the LED lamp produces high temperature, so the LED lamp when the choose and buy must choose the high quality product, otherwise it will produce safe hidden trouble. Now LED lamp is mainly used for all kinds of commercial space lighting and architectural decoration lighting, etc. At the same time to shoot the light is divided into low pressure and high pressure, proposal consumer had better choose low voltage lamp, due to low pressure lamp life relatively longer, the higher light efficiency. Shoot the light of the general lighting power factor to decide, good lamp power factor can reach 0.99, but the price is much expensive. On the second place in application to distinguish: LED tube lights are mostly installed in the ceiling, above ceiling to 150 mm is required to install. Of course, there are LED tube light is of the external type. General selection in the absence of the location of the dome light or droplight to install the LED tube light, the light is slightly softer than shoot the light.
- Q:What is the difference between led lamp MR16 and MR11?
- Two new shoots. Different sizes. The power is different. Can go to our bang's website to see.
- Q:What is the difference between led track lamp and led lamp? Search the hotel guest room can be used?
- LED lamp in several types of products, including ceiling lamp, embedded spotlights, grid lamp, track shoot the light, etc., mainly used in commercial lighting space.
- Q:How do I get the light
- Shoot the lamp to generally have a lamp holder, transformer, lamp cup plug into the socket, lamp holder line received 12 v low voltage output from the transformer online, on the other side mark 220 v line and zero line.
- Q:Led lamp light source plate can change yourself?
- Change that can change, the overall is good, the inside of the bulb is not good to buy also is bad, because bad you sure is bad or the light bulb lamp body,
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
High Quality Dimmable Led Spot Light
- Loading Port:
- Shanghai
- Payment Terms:
- T/T
- Min Order Qty:
- 10 Pieces pc
- Supply Capability:
- 20000 Pieces Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords