Epistar Led Strip 5050; Rgb 5050 Led Strip; Dc12V Input / Addressable Ws2811 Ws2812 Led
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 5 Meters m
- Supply Capability:
- 500 Meters Per Day m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
Epistar Led Strip 5050; RGB 5050 LED Strip; DC12v Input / addressable ws2811 ws2812 led
1.5050 SMD RGB LED
2. 20pcs WS2811 IC with 60 leds
3.5meter/reel
Specifications
WS2811 led digital strip,60leds/m,5m/reel
DC12V input,20pcs IC and 60pcs 5050 SMD RGB,high brightness (epistar leds)
60pcs 5050 RGB LED With 20pcs WS2811IC ,Connecting with the controller can get more than 80 programs which are various color changing and almost magic effect
1. Model: 5050RGB WS2811
2.Input voltage: DC12v
3.Current: 15A
4.Led Qty: 60per SMD 5050 meter
5.Wave length(NM):R-650mcd, G-520mcd,B-460mcd
6.Power(W/M):14.4W/M
7.Signal: WS2811 chip
8.View angle:120 degree
9.Life span:no less than 50000hrs
10.Dimension:1200*14*2.2mm
11.Packaging:5M/reel in antistatic bag
12.Waterproof ip67
13.White pcb
Application
1) Building decoration
2) Car decoration
3) Amusement park and theater lighting
4) Emergency hallway lighting
5) Shopping mall, restaurant, hotel, meeting roomand advertisement lighting and decoration
Features
1,) Using super bright SMD LED as light source. High brightness, low-light decay, long life, color and good consistency
2,) Can be bent, can be arbitrarily fixed in the concave surface; Small size, rich colors. A red, yellow,blue, green and white and other colors for customers to choose;
3,)Every three or six LED lights can form a loop; Every three or six LED lights can be cut along any of the above tangent, without damaging other parts;
4,) Low voltage power supply, security and stability;
5,) Formed by the printed circuit board, on the back of a double-sided adhesive for paste, small size.
6,) For transparent or non-transparent material around the light;
7,) Each volume of the standard length: 5 meters / roll, according to customer requirements.
Installation
1) Make sure the connection is correct according to the diagram.
2) Pay attention on the parameters limit on the above form. DO NOT run over the peak value.
3) Avoid the crook area is the just the position of LED and other components, in order to protect the productand extend the life span of the product.
4) In installation please note that led strips the article input and output port.
5) When a current in please make sure the input voltage for the article lamp whether DC12V or DC5V.
6) The outdoor when using note, the led strips of article exterior waterproofing if there is any breakage.
Why choose us
1.)All our products pass CE test .
2.)Every products require aging test for 24 hours
3.)Your inquiry will be replied in the shortest time, no more than 24 hrs
4.)OEM&ODM are acceptable.
5.)Our delivery timer is within 5 - 7 Workdays after payment on common quantity.
Packaging & Delivery
Package:
1 x Box
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q:The problem of residual light in LED lamp after power failure
- The power line can be switched to zero. The main switch is off and caused by a zero line.
- Q:What happens if the 12vled lights are connected to the 24V transformer?
- The 12vled lamp with the 24V transformer will cause the led to burn out because the output voltage of the transformer is well above its rated voltage. Solution: the LED lamp is connected in series with a small sliding rheostat, regulator resistor, the voltage divider also can reach 12V.
- Q:LED lights with 80V induction, string, how many ohm resistance?
- Generally speaking, LED lamp with power is 1210 4.8W per meter, i.e. constant current per meter is 0.4A, LED lights a few meters with the load current and so on; LED lamp with power is 5050 7.2W per meter, namely constant current per meter is 0.6A; 0603 LED lamps with power is 1.5W per meter, namely constant current per meter is 0.125A.
- Q:Led how should I choose the light belt?
- There are many kinds of lights: LED flexible band, LED hard light strip, LED rainbow tube, can be called "light strip" or "light belt", I will talk about flexible lamp belt selection method:Look at this lamp with FPC, is also the circuit board, now a lot of businesses in order to save costs, the single copper has to do such a lamp with a long time, severe fever, LED life, is only a single panel you can see the back line (no LED this surface is smooth, the color is uniform) 2, double sided board have a line, a line of local color is deep, hands feel thick
- Q:LED lights with 12 volts a meter, how many W?
- Power calculation method for LED lamp band:Power is the measure of the transmission rate of energy. In a DC circuit, it is the product of the voltage V and the current A; it is much more complicated in the AC system. Whether they are high voltage or low voltage LED light belts, they convert AC to DC to work.
- Q:LED current increases beyond 20MA, or when 30MA-50MA has consequences for LED lights?
- Brightness increases, calorific value is great, life is reduced.If the rated current is not large, relative to 20-30mA is relatively large, then the LED will burn out.
- Q:How about the short circuit when the LED lamp belt is installed?
- If the LED light is short circuited, the controller can be replaced.
- Q:How to choose home decoration LED lamp belt?
- LED lamp belt after several years of rapid development, the market presents a variety of LED lamp belt, uneven quality, good or bad. In the purchase and use, consumers should polish their eyes, choose their own high-quality light belt, remember not to covet petty gains.
- Q:LED the band is cut off in the middle. Is it still bright ahead?
- Thick circuit board solder layer LED flexible light strip, welding solder and circuit board can not fully integrated together, is a kind of phenomenon.
- Q:How about the wattage of the hidden LED lamp belt?
- With the power to the lamp, light stability, and then with a clip on ammeter multimeter to measure current and voltage in the circuit, lamp with P total =U*I not even out of it!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Epistar Led Strip 5050; Rgb 5050 Led Strip; Dc12V Input / Addressable Ws2811 Ws2812 Led
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 5 Meters m
- Supply Capability:
- 500 Meters Per Day m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords