2018 Lasted PPR Pipe Watering Irrigation used in Irrigation system
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Overview
PP-R (polypropylene random) tube called type three polypropylene pipe and is also called the PP-R pipe or PPR pipe, with energy saving, environmental protection, high strength, corrosion resistance, with smooth inner wall has the advantages of scale, construction and easy maintenance, long service life, widely used in building water supply and drainage, urban drainage city gas and power cable sheath, and industrial fluid transportation, agricultural irrigation construction, municipal, industrial and agricultural fields. The PP-R pipe is made of random copolymerized polypropylene and is extruded into tubes to be molded into tubes.
Advantanges
1, High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.
2, Heat insulation and Saving Energy: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe.
Non-toxic: no heavy metal additives would not be covered with dirty or contaminated by bacterium.
3, Corrosion Resistant: resist chemical matters or electron chemical corrosion.
4, Lower Installation Costs: light weight and good hot-melt performance can reduce installation costs by as much as 50% over metal piping system.
5, Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes.
6, Long Life: more than 50 years under normal conditions.
7, Recycled and Environment-friendly.
Product Description
Pressure | Size(mm) | Pressure | Size(mm) |
PN1.25MPA | 20*2.0 |
PN1.6MPA | 20*2.3 |
25*2.3 | 25*2.8 | ||
32*2.9 | 32*3.6 | ||
40*3.7 | 40*4.5 | ||
50*4.6 | 50*5.6 | ||
63*5.8 | 63*7.1 | ||
75*6.8 | 75*8.4 | ||
90*8.2 | 90*10.1 | ||
110*10.0 | 110*12.3 |
Product Show
FAQ
1. Can you find a translator for me?
You can tell us which language you speak, we will find the translator for you, and will be together work.
2. If we want to develop some new item, but maybe we just have some ideas, how can you do?
We can make new mold base on your idea, generally, if your quantity is more enough, we can refund the mold cost to you.
3. How Long Is Delivery?
Delivery time will be 30-45 days according to order quantity.
4．What Is Our Normal Payments Terms?
Our normal payment terms: T/T, L/C or western union
- Q:How do plastic tubes compare to fiberglass tubes in terms of weight?
- Plastic tubes are generally lighter in weight compared to fiberglass tubes.
- Q:How do you get a plastic tube on your shoelace? What's the name of the machine? Thank you
- Shoelace heading machine, according to the mode of work is divided into single shoe shoelace start machine and doubles shoelace lead machine two kinds. Single tool, as the name suggests, is in the middle of the mold, only a pair of cutting tools for Baotou, finished products in the middle of the direct connection. In the middle of the mold, there are two pairs of cutting tools for Baotou and cutting the rope at the same time.
- Q:What is the level of transparency of plastic tubes?
- The level of transparency of plastic tubes varies depending on the type and quality of the plastic used. Some plastic tubes can be completely transparent, allowing for a clear view of the contents inside, while others may have a certain degree of opacity, making it difficult to see through. It is important to consider the specific requirements and intended use of the plastic tubes when determining the desired level of transparency.
- Q:I recently purchased some plastic tubes that have a spelling mistake. The print can be removed using some alcohol and some serious elbow grease. Does anyone know a better way to remove the print? Is there something better to use other than alcohol that won't damage the plastic bottle?Any help would be appreciated!Mike
- use goo gone. You can find it at most walmarts
- Q:What's the name of that plastic tube used to fold stars?
- (1) the straw is bent back;(2) turn left pipe to the lower right;(3) turn the upper pipe to the left;(4) turn the two pipes together;(5) wrap the left tube over the right tube and fold it to the lower right;(6) wrap the upper tube over the lower tube;(7) the two pipes are turned together, with steps (4), repeating steps (4), (5), (6), (7);(8) stick the first angle close to the two pipes;(9) wrap the left tube over the first corner;(10) turn the top pipe down to the bottom;(11) repeat steps (9), (10) fold the tube to the end;(12) pass one of the tubes through the stars;(13) trim after tensioning;(14) complete
- Q:would this exhibit electromagnetism just like a copper wire solenoid? Could it actually be even more efficient than a copper wire solenoid?
- Only if a current(which would be limited by the resistance of the salt water or copper) was applied.So your question is which has less resistance per unit of cross section.Which would be copper.So the answer is no it wouldn't be more efficient(excess heat).Besides to do so would be a hard task what with leaks,space for the plastic tube etc. since the field is determined by ampere turns.
- Q:I remember 35 years ago, when all the uproar was made about aluminum or metal filings were found inside toothpaste tubes. %Health issues were raised about the residual filings in the base of toothpaste tubes for people who press the last nth of toothpaste from the tube.I'm researching about this concern in the plastic and other material-type tubes used nowadays.How SAFE / secure can we be (is there a watchdog org?) to Q.C. this safety-issue in the commercial brands of toothpaste nowadays?I use a tube-wringer on my toothpaste tubes so I get the last nth of toothpaste from each tube and I am curious how SAFE a practice this is.
- There's no way to remove all toxins from anything manufactured. If however, you are simply brushing your teeth with the toothpaste and not actually consuming it, I think you'll be ok. Afterall, the metal, aluminum or plastic filings (if swallowed) would only pass through your digestive course. Should harm occur it would likely be in a circumstance where there was already an issue, i.e. ulcers, diverticuli, etc. On the other hand, if you WERE to ingest fluoridated toothpaste you could become gravely ill on consumption of fluoride alone. Long story short: I think you'll be ok.
- Q:What are the common diameters of plastic tubes used for irrigation in agriculture?
- The common diameters of plastic tubes used for irrigation in agriculture range from 0.5 inches (12.7mm) to 1 inch (25.4mm).
- Q:I am looking for plastic tubing that has an ID of .5mm to 1mm that is made of a light weight material, and is sold in straight lengths, opposed to a coil. I am trying to avoid the coil because my application requires a very straight piece of tubing. Any help would be greatly appreciated. Thanks, Zach
- If you do not need long straight lengths and you do not need much pressure, you can buy plastic drinking straws that are smaller than normal. You can find them at coffee shops and may be able to find them at the grocery store. good luck
- Q:What's the function of wax in PVC plastic pipes?
- PVC (full name Polyvinylchlorid) for polyvinyl chloride, in addition to other ingredients to enhance its heat resistance, toughness, ductility and so on. The top layer of this surface film is lacquer, the main component is polyvinyl chloride, and the bottom layer is coated with adhesive. It is a very popular, popular and widely used synthetic material in the world today. Its global usage ranks second in various synthetic materials. According to statistics, only in 1995 a year, PVC production in Europe, there are about five million tons, while its consumption is five million and three hundred thousand tons. In Germany, PVC production and consumption averaged one million and four hundred thousand tons.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
2018 Lasted PPR Pipe Watering Irrigation used in Irrigation system
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
