2018 New Ppr Pipe Plastic Pipe Used in Irrigation with Superior Quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description of Products:
PP-R (polypropylene random) tube called type three polypropylene pipe and is also called the PP-R pipe or PPR pipe, with energy saving, environmental protection, high strength, corrosion resistance, with smooth inner wall has the advantages of scale, construction and easy maintenance, long service life, widely used in building water supply and drainage, urban drainage city gas and power cable sheath, and industrial fluid transportation, agricultural irrigation construction, municipal, industrial and agricultural fields. The PP-R pipe is made of random copolymerized polypropylene and is extruded into tubes to be molded into tubes.
PPR Pipe Size:
PN10 | PN12.5 | PN16 | PN20 |
25*2.3 | 25*2.8 | 25*3.5 | 25*4.2 |
32*3.0 | 32*3.6 | 32*4.4 | 32*5.4 |
40*3.7 | 40*4.5 | 40*5.5 | 40*6.7 |
50*4.6 | 50*5.6 | 50*6.9 | 50*8.4 |
63*5.8 | 63*7.1 | 63*8.6 | 63*10.5 |
75*6.9 | 75*8.4 | 75*10.3 | 75*12.5 |
Specification:
Products name | Tee with Tap Connector Male |
Material | PPR |
Field of Application | Water |
Work temperature | -10℃-110℃ |
Packing | standard export package or customized |
Function | Kitchen, home, commercial, garden and general |
Place of origin | Hebei China(mainland) |
Brand | CMAX |
Application:
1) Cold and hot water systems of residence and commercial buildings
2) Transportation of industrial water supply and chemical materials
3) Pure water pipe system
4) Piping networks for rainwater utilization systems
5) Irrigation agriculture and horticulture systems
Product Feature:
1. High Temperature Resistance: the maximum sustained working temperature is up to 70°C , the maximum transient temperature is up to 95°C
2. Heat Preservation: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe
3. Non-toxic: no heavy metal additives, would not be covered with dirt or contaminated by bacterium
4. Corrosion Resistance: resist chemical matters and electron chemical corrosion
5.High Flow Capacity: smooth interior walls and low friction result in low flow resistance and high volume
6. Excellent Flexibility: can be supplied in coil
7. Low Installation Costs: light weight and ease of installation can reduce installation costs
8. Longevity: more than 50 years under proper use
Product Advantages:
1) Healthy, bacteriological neutral, conforming to drinking water standards
2) Resistant to high temperatures, good impact strength
3) Convenient and reliable installation, low construction expenses
4) Excellent heat-insulation property from minimum thermal conductivity
5) Lightweight, convenient to transport and handle, good for labor-saving.
Company Profile:
CNBM International Corporation (CNBM International) is the most important trading platform of CNBM Group Corporation, a state-owned company under the direct supervision of State-owned Assets Supervision and Administration Commission of the State Council.
CNBM International is highly recognized by its business partners and clients all over the world and has obtained rapid development under the spirit of win-win. We will carry on the mutual beneficial, innovative and revolutionary trading structure as we did before, create value for our employees, share holders and clients and benefit the whole society in our future development.
FAQ:
Q1:How Can I Get A Sample?
A1:You can get samples by communicate with our export sales.
Q2:How Long Is Delivery?
A2:Delivery time will be30-45days according to order quantity.
Q3:What Is The MOQ?
A3:MOQ depends on different items.
Q4:What Is Our Normal Payments Terms?
A4:Our normal payment terms now is: T/T, L/C or western union,paypal
- Q:PE is the hot melt?
- 1. When using this method, the hot melt butt welding machine is adopted, and the main operation steps are as follows:After the butt welding machine has been debugged, put the pipe to be placed on the welding jig and clamp;The cleaning pipe end to be connected and connected with two end milling cutter alignment docking, the displacement is not greater than the pipe wall thickness of 10%:When the temperature of the heating plate reaches the set temperature, put it on the heating plate:After heating, take out the heating plate, quickly start the oil pump pressure, join the two pipe heating surface, and step up to the welding pressure, keep pressure and cool down:After cooling to the specified time, open the clamp and remove the pipe from the rack, observe the roll edge, determine the quality of the connection, and complete the connection.2. Check the quality of hot melt butt jointThe determination of the quality of hot melt butt welding is still mainly concerned with nondestructive appearance inspection of welding roll edges. Usually includes edge geometry and cutting edge visual inspection, the edge to behind the buckling to prove that connected with no lack of fusion check.Ultrasonic testing and X ray examination have been applied abroad.Destructive detection. Tensile test, bending test and tensile creep test are carried out at the interface respectively.3, hot melt docking notes:The procedures for the use of the docking machines and the matters needing attention shall be observed;Operators must wear gloves, wear overalls, do a good job of self-protection, to avoid electric shocks or burns;Heating the surface of the board, and the connecting ends should be kept clean:Docking pressure should be adjusted to the actual needs of the site:Polyethylene pipes shall not be heated by open flame;The welding interface to protect from sand and rain hit.
- Q:How do you connect plastic pipe fittings to copper pipes?
- To connect plastic pipe fittings to copper pipes, you can use a transition fitting. This fitting typically has a threaded end that screws onto the plastic fitting, while the other end is soldered or brazed onto the copper pipe. It creates a secure and leak-proof connection between the two different materials.
- Q:Are plastic pipe fittings resistant to seawater and saltwater?
- Yes, plastic pipe fittings are generally resistant to both seawater and saltwater. They are often made from materials like PVC (polyvinyl chloride) or CPVC (chlorinated polyvinyl chloride), which have excellent corrosion resistance properties and can withstand prolonged exposure to seawater without any significant degradation.
- Q:Are plastic pipe fittings suitable for pharmaceutical laboratories?
- Yes, plastic pipe fittings can be suitable for pharmaceutical laboratories. They are often made from materials such as polyvinyl chloride (PVC) or polypropylene, which are chemically resistant and can withstand the rigorous demands of pharmaceutical applications. Plastic pipe fittings are lightweight, easy to install, and can be easily cleaned and sterilized. Additionally, they offer excellent corrosion resistance, which is crucial in maintaining the purity of pharmaceutical products. However, it is important to consider specific requirements and regulations of the laboratory and consult with professionals to ensure the appropriate choice of materials and fittings.
- Q:How do you connect plastic pipe fittings?
- To connect plastic pipe fittings, you typically need to follow these steps: 1. Ensure that the pipe and fittings are clean and free from any debris or dirt. 2. Apply a suitable solvent cement to both the pipe and fitting surfaces. 3. Insert the pipe into the fitting firmly and make sure it is fully seated. 4. Hold the joint in place for a few seconds to allow the cement to bond and set. 5. Wipe away any excess cement and allow the joint to cure as per the manufacturer's instructions.
- Q:Can plastic pipe fittings be used for cooling tower systems?
- Yes, plastic pipe fittings can be used for cooling tower systems. Plastic pipe fittings, such as PVC or CPVC, are commonly used in cooling tower systems due to their chemical resistance, durability, and cost-effectiveness. These fittings are capable of handling the flow and pressure requirements of cooling tower systems and can effectively transport water and other cooling fluids. However, it is important to ensure that the specific plastic material being used is compatible with the temperature and chemical requirements of the cooling tower system to ensure proper performance and longevity.
- Q:Can plastic pipe fittings be used in geothermal heat pump systems?
- Yes, plastic pipe fittings can be used in geothermal heat pump systems. The use of plastic pipe fittings is common in such systems due to their resistance to corrosion, durability, and ease of installation. Additionally, plastic pipe fittings are typically more cost-effective compared to alternatives like metal fittings.
- Q:Can plastic pipe fittings be used for power plant cooling systems?
- Yes, plastic pipe fittings can be used for power plant cooling systems.
- Q:Are plastic pipe fittings resistant to corrosion from soil?
- Yes, plastic pipe fittings are generally resistant to corrosion from soil.
- Q:Can plastic pipe fittings be used for pharmaceutical manufacturing?
- No, plastic pipe fittings are not suitable for pharmaceutical manufacturing due to the risk of leaching chemical contaminants into the products.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
2018 New Ppr Pipe Plastic Pipe Used in Irrigation with Superior Quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords