PPR Pipe and Fitting for Cold and Hot Water
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Description
PP-R PIPES Features & Advantages
1. Sanitization & Non-poison: This product is green building material which is able to use for pure clean drinking water pipe system. No heavy metal additives would not be covered with dirt or contaminated by bacterium.
2. High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.
3. Corrosion-Proof & Non-Fouling: Resist chemical matters or electron chemical corrosion. Able to avoid the pipe's fouling or blocking as well as the blemish, rust on basin and bath.
4. Heat Preservation & Energy-Saving: Excellent heat insulation features, minimal thermal conductivity which is only 0.5% of the conductivity of metal pipes.
5. Less Weight & High Strength: Its proportion is only 1/8th of metal pipe’s, with pressure-proof strength up to over 5MPa(50kg/sqcm),high tenacity and impact resistance.
6. Beautiful Appearance & Higher Flow Capacity:Smooth inner and outer surfaces, less flowing resistance, soft color and beautiful figure.
7. Easy and Reliable Installation: Using heat melting joint without sleeve wire, and taking few seconds for connecting and adopting good quality copper inserts to connect the metal pipe and basin.
8. Long Using Life: The pipe system can be used for over 50 years under normal condition.
9. PP-R is recyclable and environmental friendly.
Product Applications
Distribution for cool and hot water
Duct for drinkable water system
Pipes for kinds of high-temperature and low-temperature heating system
Pipes for heating and coolling settings in solar energy system
Connecting pipe for air conditioners
Main Product Features
Large drum hub to maximize cable life
Self-activating automatic brake hold the load securely when crank handle is released
With cable or strap
Safety guard cover available
Top quality with competitive price
Widely used in the double beam bridge crane and gantry crane
Easy to install and high quality
Compact structure and reasonable design
Could be mounted on t he ground or wall!
Double drum!!
Production process
Specifications
20-110MM
FAQ
Q1：How Can I Get A Sample?
A1:You can get samples by communicate with our export sales.
Q2:How Long Is Delivery?
A2:Delivery time will be30-45days according to order quantity.
Q3:What Is The MOQ?
A3:MOQ depends on different items.
Q4:What Is Our Normal Payments Terms?
A4:Our normal payment terms now is: T/T, L/C or western union,paypal
- Q:If you have a CPAP machine with a nasal mask, and it is new, does the smell of the plastic make you feel ill? Anyone have this experience, and what did you do about it ?
- Yes it does smell at first, but it goes away with time, especially after a few washings. I actually like the smell now when I get a new mask, maybe because I know it's new.:)
- Q:About plastic drain pipe expansion joint
- Expansion joint, also known as telescopic joints. The long distance pipeline also has expansion and contraction when there is temperature change, in order to protect the pipeline, when the heat rises and contracts cold, the pipeline will not be damaged, and the case is guaranteed without leakageThe expansion and contraction of the pipeline play a regulating role in order to avoid the pipe being broken or cracked.
- Q:Why, in general, the strong tube is plastic tubes, weak tubes are metal tubes?
- Weak metal pipe is mainly anti-interference, shielding role. Strong PVC is because the cost material cost and construction low construction speed, simple process, smooth inner wall wear line resistance is small but low strength, in more than 40 pipes generally required chroma metal tube or galvanized metal tube special.
- Q:Can plastic tubes be used for liquid dispensing in beauty products?
- Yes, plastic tubes can be used for liquid dispensing in beauty products.
- Q:How do you prevent plastic tubes from melting?
- To prevent plastic tubes from melting, it is important to avoid exposing them to high temperatures or direct heat sources. This can be achieved by keeping them away from flames, extreme sunlight, or hot surfaces. Additionally, using plastic tubes made from heat-resistant materials can offer better protection against melting.
- Q:I want to bleed my clutch but I was wondering if I can do it without the plastic tube that goes on the bleed nipel??? Help?
- Yes get a one man bleeder kit ,there very cheap ,it will have a syringe that will get bleeding started then it will just gravity bleed, I have Never needed a second person with Integra ,very easy job , I have done over 100 clutch masters ill bet all with a perfect pedal when i was done,,if you replaced slave cylinder you wasted your money ,,20 years on acura cars I never seen one leak ,good luck...O Also don't go nuts worrying about old fluid soaked rags and such . just don't get on paint,..and its water soluble so if you do just hose it off ..i never seal old rags in plastic bags and crap like that like the other dude said ,i respect he does but its overkill ..lol
- Q:Are plastic tubes resistant to impact or cracking?
- Plastic tubes can be resistant to impact and cracking depending on the type of plastic used and their thickness. Some plastics, like PVC or acrylic, are known for their durability and ability to withstand impact, making them less likely to crack. However, thinner plastic tubes or those made from less durable materials may be more susceptible to impact and cracking. It is important to consider the specific type and quality of plastic when evaluating their resistance to impact and cracking.
- Q:What sizes are plastic tubes available in?
- Plastic tubes are available in a wide range of sizes, ranging from small diameters like 1/8 inch to larger ones such as 4 inches or more.
- Q:a. ultraviolet (germicidal light)b. 121 C at 15 psi for 15 minutesc. 160 C for 2 hoursd. all are correct
- If it were a Glass tube the answer would be A. UV Light does not go through glass well and would not kill much. If it is a plastic tube, D.
- Q:After pierced ears, the plastic ear canal is changed
- After the best change not because of fresh ear stick earrings is changed, the recovery is not good. Just wear a plastic ear stick and don't worry about itAfter a period of time, you look at the pierced ears around the meat into the pierced ears, and pierced ears almost ready. It doesn't matter what you wear again.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
PPR Pipe and Fitting for Cold and Hot Water
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
