PVC foam board/hot size 1.22m*2.44m/biggest manufacturer from CNBM
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
PVC foam board/hot size biggest manufacturer from CNBM
Specification
Usage Life |
more than 50 years |
Hardness | ≥10Mpa |
Elongation at Break | ≥10% |
Water Absorption | ≤1.0% |
Application | Wall cladding, decorating shelf, etc |
Product Introduction
1 PVC foam board is made from polyvinyl chloride, with flat plate surface; it is widely used in construction, advertising display boards, mounting board, screen printing, carving, etc.
2 PVC foam board / sheet / pallet is the best material in block making industry as the carrier of the green blocks, it has the advantages of highest strength with smooth surface, moisture proof and heat-resistant, it can maintain stable performance under high temperature. Waterproof, anticorrosive, metabolic and recyclable, moisture resistant, lightweight.
Product Features
(1) Light weight, waterproof, fire retardant and self-extinguishing
(2) Sound insulation, heat insulation, noise absorption, heat preservation and anti-corrosion.
(3) Tough, rigid with a high impact strength, not easy to age and can keep its color for long
(4) Easy to clean and maintain.
(5) Environmental- friendly green and lead-free.
Product Application
(1)Advertising: exhibition display, digital printing, silk screen printing, computer lettering, sign board, light box, etc.
(2)Construction: office and bathroom cabinets, inner and outer decorate panel, commercial decorating shelf, room separating
(3)Transportation: steamboat, airplane, bus, train carriage, roof and carriage inner layer and other industry.
- Q:Pvc board how to install curved curtains
- Electric track is customized directly from the manufacturers, requiring accurate size, can not turn right angle or bend too fast, and the width of the curtain box requirements.
- Q:What is the difference between PVC board and PC board?
- Acrylic 1. Transparent high, light is not easy to deformation, good guide optical rotation. 2. PMMA difficult to fire, can slowly burn. 3. Unsuitable alcohol, ketone, alkali, soluble in aromatic hydrocarbons, oxidized hydrocarbons (trioxide can be used as a binder). 4. Easy to shape, size and stability. 5. Impact resistance and surface hardness are slightly worse, easy to rub the price is very expensive PVC is very soft ... can be the same as the paper folded 2. and acrylic than ... acrylic is very easy to rotten 3.PVC will not rotten ... Organic board 1. partial yellow .. there are dregs .. material surface potholes .2. Thickness uneven .... he and acrylic like .. also known as advertising board ... very cheap
- Q:Pvc board how to paint? With the general way of painting in the pvc board spray paint spray uneven, which know friends told me, his home to buy a few pvc board to do the closet, but how the experimental spray spray do not understand. Polyvinyl chloride material
- Spray the way, if it is pvc, then it is not too suitable, because that way, then pvc translucent no, you can find professional spray paint, the best institutions, because they have paint room, so spray can, Otherwise artificial to do, it is difficult to achieve good results
- Q:just put a plastic ceiling up and my labourer put a dent in the 2nd board there are 9 pvc cladding boards on the ceiling but I cannot start taking them back out from the end to replace it as I have put a walk in shower in and the wet wall shower boards tie them in is there any other way I can replace it I havnt tiled it in yet the boards are silicone and screwed on the lip HELP PLEASEEEEEEEEEE!!! Thanks
- Without inspecting the installation, it would be hard to say. However, some general pointers. Possibly you can remove the ceiling boards from the other side. Consider carefully cutting away the dented portion of the panel. You can probably cut away the entire damaged panel and squeeze in a replacement. You can offer the customer a 50% discount on the job.
- Q:Blister and PVC board distinction. Detailed description of the best.
- Blister board is an amorphous, odorless, non-toxic, highly transparent colorless or slightly yellow thermoplastic engineering plastics, with excellent physical and mechanical properties, especially excellent impact resistance, tensile strength, bending strength, compressive strength High; creep small, stable size. In fact, PVC can do plastic panels but do not have the effect of PMMA good At present the industry with acrylic plastic products to do more, but the price relative to the PVC to be high! Hope to help you
- Q:At present home decoration used in white, beige panels have those? Type with PVC board?
- White maple, white oak, white pine, rose wood, ruminant wood,
- Q:, Pvc board, wood keel ceiling, contractors, not packing materials, buy their own wooden screws, mainly to do the bathroom, toilet kitchen, open at 4 meters above, how much money a square meter can do
- Fifteen dollars per square, the premise is flat top. Southern words about twenty or so. Specifically your description of your area
- Q:Pvc stone floor with hot water bubbles after the UV layer can be torn from the floor, and then you can smell the irritating smell, the business that no formaldehyde, but I think this taste UV layer is certainly sticking up and not hot The
- Hello: I am PVC floor production process personnel, the so-called composite PVC floor layer is compound, and sometimes because of the composite temperature is not enough and other reasons there is no organic interface between the two layers of good, there will be opened The General UV layer is applied to the floor surface, the treatment did not solvent evaporation, the polymer in the coating is UV light cross-linked curing. Should not have such substances as formaldehyde. As for the source of the smell, may be the use of PVC additives and processing aids out of the question.
- Q:Pvc plastic plate afraid of the sun?
- All the plastic products are afraid of sun drying, especially the sun exposure easily lead to fade products aging
- Q:Pvc drainage board construction process which
- Basement wall impermeable water, can be laid on the main building wall drainage board, round table facing the main wall. Drainage board and then build a layer of single-wall or steel mesh pipe cement to protect the drainage board, so that the wall outside the water pipe straight down into the blind ditch straight to the collection pit.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
PVC foam board/hot size 1.22m*2.44m/biggest manufacturer from CNBM
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords