hot extrusion sheet die for foam PVC sheet
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick open sheet extrusion t-die
The thickness can be quickly adjustable with the flexible lower lip,the thickness of the production can be adjusted in the range of 5mm without interruption.Adjuatable upper die lip,flexible lower die lip can be quickly adjusted, 45 degree restrictor bar,fit for PC,PS,PP,PE,PLA single-layer or multi-layer plate and sheet.
Raw material | PS,PA,PE,PP,ABS,PET |
Mould width | 500-8000mm |
Thickness range | 3-8mm |
Die body material | P20/5CrNiMo/2738 imported from GERMANY |
Flow channel | Clothes rack with 90 degree Restrictor bar |
Thickness adjustment | Upper lip micro adjustable, down lip can be adjustable and replaceable |
Heating Voltage | 220V/50HZ/three-phase |
Heating unit | Stainless steel heating bar |
Cable connection | Close connecting with protection cover |
Fastening part | 12.9 high strength screws |
Polishing | Lips and surface of flowing: 0.02-0.03(μm), Other surfaces 0.03-0.04(μm). |
Electroplating | Die head stream surface hard chrome plating thickness 0.05-0.04(mm) Hardness 60-65 HRC Outside surface hard plating thickness0.02-0.03(mm) |
Feeding | Round center feeding(normal) |
Spare parts
Screen changers,feedblocks,melt pump,etc.
Commissioning
At the requirement of user, salers should send technician to install and commissioning the die at site of Buyers, expenses of the trip should be borne by Buyers.
After-sales service
Follow operation manual, normal production, "three guarantees"(for repair, replacement or compensation of faulty products) for one yea
- Q:How are plastic sheets different from other materials like glass or metal?
- Plastic sheets differ from materials like glass or metal primarily due to their composition and properties. Unlike glass, which is made from silica and metal, which is derived from various elements, plastic sheets are made from synthetic polymers derived from petroleum or natural gas. This difference in composition gives plastic sheets their unique characteristics such as flexibility, lightness, and resistance to impacts and weathering. Plastic sheets are also more cost-effective to produce and easier to shape and mold compared to glass or metal, making them widely used in various industries.
- Q:Wooden block or plastic block?
- Many plastic chopping board to polypropylene, polyethylene and other chemical material, not suitable for cutting food oil, otherwise it is not good for cleaning. The plastic board is not resistant to high temperature, if the temperature of the food on top, it is easy to cause deformation. Even some boards contain lead, cadmium and other plasticizers, long-term use of carcinogenic risk; textured plastic boards, but also easy to cut out pieces, enter the body with food, the damage to the human liver and kidney.
- Q:Can plastic sheets be used for insulation in buildings?
- Yes, plastic sheets can be used for insulation in buildings. They are often used as a vapor barrier to prevent moisture from entering the building, and can also help reduce heat transfer and improve energy efficiency.
- Q:I want to shatter a piece of plastic to use for an art project. Is there a way to crack it into a web-like shape like this
- You can try putting clear contact paper on one side of it.
- Q:PVC plastic gusset plate size generally?
- Standard Specification for common PVC plastic gusset plates:1, PVC plastic gusset plate thickness: common are 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm and so on;2, PVC plastic gusset plate width: common 20cm, 25cm, 30cm and so on;3, PVC plastic gusset plate length: common 3M, 5.8m, 5.95m;
- Q:those plastic sheets that can be usd in picture frames, on the shed or in the house, I have seen them in BQ, what shall i type when searching for the plastic sheet on 'OKorder', I have typed plastic sheets but no luck, can you help me on this one.
- Another name of Polycarbonate Lexan Sheet is plastics which are used in various purposes. Normally it is used for security purposes. It is made in different colors and thicknesses. So it may used in shed windows.
- Q:I have unfinished basement with insulation hanging from top. I am thinking about covering it with something to make a ceiling for the basement. What is the cheapest, thinnest, and lightweight material that I can use for this project? any help will be greatly appreciated. Basement is about 30 ft by 80 ft (approx.)
- You can buy both balsa wood and bass wood at most craft stores in the arts and crafts department. They are availible in strips that are 2-4 wide and 2-4 feet long in differnet thicknesses. You will also find a wide variety of findings and fittings you might like to use as well as any glues and finishes. Michael's, JoAnn's, Hobby Lobby....
- Q:Can plastic sheets be used for greenhouse siding?
- Yes, plastic sheets can be used for greenhouse siding. They are commonly used due to their affordability, durability, and ability to allow light transmission while retaining heat.
- Q:POM what's the plastic board for?
- POM is the abbreviation of paraformaldehyde. It is a new kind of fine resin developed after nylon. It has good comprehensive properties.
- Q:I will be adding a dehumidifier in the spring.
- Yes, you must replace it the soonest possible. Mold can become airborne when disturbed. Spores that travel in the air can easily settle on mold prone surface and grow rapidly. Molds are very stubborn, once they start to flourish, it's hard to remove then completely. Therefore, you should take the precaution step by replacing the moldy plastic sheeting and remove any visible mold at its first appearance.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
hot extrusion sheet die for foam PVC sheet
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords