Single Coil Galvanized Razor Barbed Wire High Quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Product Introductions:
High Tensile, BWG 16x16 | 12x14, Galvanized Barbed Wire For Fencing Protection
Barbed wire, consisting of a strand of two wires, is made by a fully automated machine; it is commonly known as barb wire, barbed wire tape, barbed wire obstacle;
Twist types: common twist, reverse twist
Classified by materials: galvanized barbed wire(normal zinc coated and heavily zinc coated), PVC coated barbed wire(blue, green, yellow and other colors are available), stainless steel barbed wire, aluminum barbed wire;
Barbed wire applications: for grass boundary, railway, highway, industrial and agriculture enclosure, animal husbandry, forestry protection, border posts, prison protection.
ASTM A 121 Standard Sizes and Constructions for Barbed Wire, Metallic Coating Type Z and Type ZA
Design Number | Size, Steel Wire Gauge | Nominal Diameter of Coated Wire, in.(mm) | Number of Barb Points | Spacing of Barbs, in.(mm) | Diameter of Barbs, Steel Wire Gauge | Shape of Barbs |
12-2-4-12F | 121⁄2 | 0.099 (2.51) | 2 | 4 (102) | 121⁄2 | Flat |
12-2-4-13F | 121⁄2 | 0.099 (2.51) | 2 | 4 (102) | 13 | Flat |
12-2-4-14R | 121⁄2 | 0.099 (2.51) | 2 | 4 (102) | 14 | Round |
12-2-5-12F | 121⁄2 | 0.099 (2.51) | 2 | 5 (127) | 121⁄2 | Flat |
12-2-5-14R | 121⁄2 | 0.099 (2.51) | 2 | 5 (127) | 14 | Round |
12-4-5-14H | 121⁄2 | 0.099 (2.51) | 4 | 5 (127) | 14 | Half-round |
12-4-5-14R | 121⁄2 | 0.099 (2.51) | 4 | 5 (127) | 14 | Round |
13-2-4-14R | 131⁄2 | 0.086 (2.18) | 2 | 4 (102) | 14 | Round |
13-4-5-14R | 131⁄2 | 0.086 (2.18) | 4 | 5 (127) | 14 | Round |
15-2-5-13F | 151⁄2 | 0.067 (1.70) | 2 | 5 (127) | 131⁄2 | Flat |
15-2-5-14R | 151⁄2 | 0.067 (1.70) | 2 | 5 (127) | 14 | Round |
15-4-5-16R | 151⁄2 | 0.067 (1.70) | 4 | 5 (127) | 161⁄2 | Round |
A. The nominal diameter of the wire used in making the barbs shall be as follows:
121⁄2 gage 0.099 in. (2.51 mm)
13 gage 0.092 in. (2.32 mm)
133⁄4 gage 0.083 in. (2.11 mm)
14 gage 0.080 in. (2.03 mm)
161⁄2 gage 0.058 in. (1.47 mm)
B. Design Number 12-4-3-12R, Metallic Coated Type A, is High-Security Grade. All other design numbers are for standard grade.
C. The gage of the half-round and flat barbs is designated by the gage of the round wire from which the barbs are rolled.
Minimum Weight of Coating on Type Z Barbed Wire
Size, Steel Wire Gage | Nominal Diameter of Type Z | Minimum Weight of Coating of Uncoated Wire Surface, oz/ft2(g/m2) | ||
in. | (mm) | Class 1 | Class 3 | |
121⁄2 | 0.099 | (2.51) | 0.28 (85) | 0.80 (245) |
13 | 0.092 | (2.32) | 0.28 (85) | 0.75 (230) |
131⁄2 | 0.086 | (2.18) | 0.25 (75) | 0.70 (215) |
133⁄4 | 0.083 | (2.11) | x | 0.70 (215) |
14 | 0.08 | (2.03) | 0.25 (75) | 0.70 (215) |
151⁄2 | 0.067 | (1.70) | x | 0.65 (200) |
161⁄2 | 0.058 | (1.47) | x | 0.60 (200) |
A. These sizes with "x"only furnished with Class 3 Coating.
Gauge of Strand and Barb in B.W.G. | Approximate Length per Kilo in Meter | |||
Barbs Spacing 3" | Barbs Spacing 4" | Barbs Spacing 5" | Barbs Spacing 6" | |
12 × 12 | 6.0617 | 6.7590 | 7.2700 | 7.6376 |
12 × 14 | 7.3335 | 7.9051 | 8.3015 | 8.5741 |
12-1/2 × 12-1/2 | 6.9223 | 7.7190 | 8.3022 | 8.7221 |
12-1/2 × 14 | 8.1096 | 8.814 | 9.2242 | 9.5620 |
13 × 13 | 7.9808 | 8.899 | 9.5721 | 10.0553 |
13 × 14 | 8.8448 | 9.6899 | 10.2923 | 10.7146 |
13-1/2 × 14 | 9.6079 | 10.6134 | 11.4705 | 11.8553 |
14 × 14 | 10.4569 | 11.6590 | 12.5423 | 13.1752 |
14-1/2 × 14-1/2 | 11.9875 | 13.3671 | 14.3781 | 15.1034 |
15 × 15 | 13.8927 | 15.4942 | 16.6666 | 17.5070 |
Razor Wire Packing Details
1. compression rolls, 5rolls, 10rolls, or more rolls as one bundle
2. water-proof paper inside with woven bag outside
3. 1roll, 3rolls or 5rolls in one carton
4. as customer request
- Q:How are wired differ from wireless doorbells,next how are they installed and finally the cost of them?
- Wired have a wire that connects the button near the door, the transformer, and the chime. When the button is pushed, the transformer energizes the chime, causing it to ring. You, or an electrician, must fish wires to a location where a transformer can get a constant supply of power, such as an outlet. There also need to be wires fished to the chime and the button. Wireless work with radio waves. Costs vary widely, depending on the setup you go with. Decent wireless units start around $35-40, and go up from there. New chimes for wired systems start around $8 and up. Transformers start at $10, buttons start around $5. Hope this helps.
- Q:how do i tap a speaker wire? car audio not really my department
- RE: Why Monster XP speaker cord sounds worse than production facility speaker cord? purely put in Monster XP speaker cord to all my Onkyo audio gadget and now its lots softer than the speaker cord that got here with my Onkyo receiver. quantity was once at 25-35 and it grew to become into loud and sparkling. Now after the Monster XP cord, I would desire to crank the receiver to approximately 50-60 to get the comparable sound...
- Q:I needed a new tail light for my trailer. The aftermarket tail lights only came with two wires sticking out the back, one red and one black. The stock tail light that broke had 3 wires and so does the harness on the trailer end. People have told me that even though it is different it will work. Do I join the two hot wires together with the red wire and then the return wire to the black? There is no wiring diagram avalible and I dont have the money to replace then entire lighting system. Thanks for your help.
- Pull the lens and look at the bulb. If it is a 2 element bulb then it will work, if it is a single element it will not. If it is a 2 element then one of the wires is turn and stop light and the other is tail light. It will use a body ground in that case. On your trailer harness you will have a brown wire, that is tail lights, the turn and stop light (same wire) will be either green or yellow depending on what side of the trailer you are on. The white wire is ground. The turn and stop light will be much brighter than the tail light so just twist the wires together and see which is which. You can hook the white wire to the mounting screw of the light fixture to be sure you have a good ground.
- Q:What are the types of Barbed wires?
- Barbed wire is a sharp, twisted form of wire which is used mainly for protection and containment. Barbed wire is twisted at various stages to create sharp points which can create an instant injury if scaled. There are several different types of barbed wire. Classic Classic barbed wire is also the cheapest available. It is made of either steel or aluminum. The wire is twisted at sequential stages to create sharp points. Classic barbed wire will be used to keep animals in a specific area or to keep people away from a protected area. Razor Wire Razor barbed wire is used to line the walls of prisons and containment facilities. This wire is made by cutting large strips of aluminum with a sharp triangular blade on each side of the wire strip. These blades are extremely sharp. They are intended to cause much greater injury than a piece of classic barbed wire. Razor wire is often used to protect business premises from intruders. Spiral Spiral barbed wire is formed with a sharp blade running parallel to a piece of normal steel. This is then twisted into a spiral shape to create a long and continuous sharp edge to the wire. Spiral wire is often used for army exercises and for other containment or protection purposes. I hope this quite help u... thank u. :-)
- Q:The spark plug wire on my dirt bike needs to be replaced because it was touching the exhaust and it burned through.I was wondering if the ignition coil and spark plug wire are one piece and need to both be replaced or is there someway to disconnect spark plug wire? They spark plug wire doesn't seem to be pluged in, but it seems to be one piece. Does anyone know?
- Many small coils on dirt bikes, small engines and scooters have the spark plug wire pressed and glued into coil- usually replace coil and wire together as plug wire basicly not replacable in field.. Aftermarket coils can be used with seperate wire or maybe use a car coil from VW beetle type or in couiple cases i know plain Ford patterns. BMW /5 had 2 Bosch coils with replaceable wires- what kind of bike you working with. Clamp car coil to front frame, run extended wire loom to coil, use metal core spark plug wire and marine plug cap- used to be common or 2 stroke racers. In emergency you can cut wire cored wires and splice in another piece, tape it up .
- Q:I have a 1996 Cadillac Deville Sedan, and I bought a female wiring harness for it off of the internet. The Factory Wires doesn't include pink, but yet all the wiring codes say pink...the adapter I bought matches up to the Head Unit I want to replace the factory with, but when i put the battery back on and everything it doesn't turn on, I need to know how to wire this thing correctly, and if I bought the wrong adapter or not...Thank You.
- do not take heed to the fairway police out the following. relying on what issues your questioning about, eliminating it ought to or may no longer reason issues. in case your anxious about your automobile magically blowing up, it WONT! you'll unlock a touch of airflow contained in the exhaust and also you'll have more advantageous skill. the automobile will also sound only a touch louder. in case you've already got loud mufflers like glasspacks it will be too loud on your style. Your verify engine gentle will sometimes turn on and rancid purely because your pc realizes that somethings lacking from the O2 sensor readings. As for gas economic gadget, anticipate little or no change. possibly a moderate progression because the exhaust flows more advantageous ideal without the reduce. Thats it! A cat isn't an mandatory gadget to the operation of your automobile. Its a downside to it. in case your anxious about the legality of it, its unlawful. yet purely how may you get stuck? possibly if its obnoxiously loud, you will get pulled over. in case you stay in a community that does emissions finding out and/or seen inspection to get your tags, your going to might want to positioned it again on once you pick to get those checks carried out. To the different answerers, if the asker became worried about environmentally conciousness they does no longer have requested this contained in the first position. thanks. I have a Mustang GT i have been using without cats for over a year. a lot more advantageous skill, sounds good, and totally reversible even as i pick to resume my tags.
- Q:plz answer correctly as soon as possible......why we use stranded 500kV wire?
- After AWG 12 or 14, all cable is stranded. The only purpose of stranded wire is to give it flexibility, regardless of voltage or current. .
- Q:trying to install aftermarket side mirrors w/turn signals and don't know where to locate the turn signal wires.it's for an 06 chevy cobalt LS automatic.Also is it okay to use electrical tape on the wires themselves after connecting them?
- should be pretty simple if you like puzzles. You can trace the signal wire out to the front of the car by using a voltmeter and watching the meter rise each time the signal works. Yes you can use electrical tape on the wires themselves after connecting them.
- Q:How do I find the remote wire on the back of my stock Ford Focus strereo? I have a line output converter to connect the rca cables to the deck, but I cannot tell wich wire is the remote wire. How can I track this wire down to connect it to the amp?
- blue wire or blue with a white stripe antenna wire, the wire that tells the antenna to go up and down or just use any wire that is only hot when the radio is on (use a test light), the power wire to the radio (not constant or memory) ignition
- Q:tryin to move dryer approx 8 more feet but existing wire not long enough have 12/2 wire can that be used to run 220 dryer
- The answer is probably NO. You can not safely use 12/2 wire to run a 220 volt dryer. 12 ga wire is only rated for 20 amps. Electric dryers are 30 amps and utilize a 2 pole breaker, so you would need to use 10/3. If your dryer is a gas dryer and only runs on 120 volts then yes you can junction 12/2 to 12/2 and extend the run the remaining 8 feet (as long as that run isn't more than about 200 feet long already). If you don't know what you are doing then just don't experiment with electricity, you can burn your house down.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Single Coil Galvanized Razor Barbed Wire High Quality
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 5 m.t.
- Supply Capability:
- 5000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products