Anti Climb Wall Spike Barbed Wire for Sale (ISO9001)
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m.t
- Supply Capability:
- 5000 m.t/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
1.Materials: high quality low carbon steel wire, stainless steel wire, iron wire ect.
2.Category: hot dipped galvanized barbed iron wire, stainless steel barbed wire, electro galvanized barbed iron wire, PE barbed iron wire, PVC coated barbed iron wire.
3.Twist types: single twist barbed wire, double twist barbed wire, traditional twist barbed wire and pvc coated barbed wire.
4.Barbed wire size: 12#*14#*3-6-16#*16#*3-6
5.usage: it is widely used in industry, agriculture, animal husbandry, dwelling house, plantation or fencing ect.
6.barbed length: 1.5-3cm
7.barb spacing: 7.5-15cm
Anti Climb Wall Spike Barbed Wire for Sale(ISO9001)
Material: low carbon steel wire , pvc coated wire
Color: blue, green, yellow etc
Type: double strand and common twist, double strand and reverse twist
(2point or 4 point)
Application :used for industry, agriculture, animal husbandry,
dwelling house, plantation ,fencing
Specification
Type | Wire gauge (SWG) | Barbed Distance | Barbed Length | |
Electro galvanized Hot dipped galvanized | 10 x12 | 7.5-15cm | 1.5-3.0cm | |
12x12 | ||||
12x14 | ||||
14x14 | ||||
14x16 | ||||
16x16 | ||||
16x18 | ||||
PVC Coated PE Coated | Before coating | After coating | 7.5-15cm | 1.5-3.0cm |
1.0mm-3.5mm | 1.4mm-4.0mm | |||
BWG11-20 | BWG8-17 | |||
SWG11-20 | SWG8-17 | |||
PVC/PEcoating thickness: 0.4mm-0.6mm |
- Q:i need to know what wire goes where
- The red and black are your hot wires, the white is neutral, and the green is equipment ground. Look at your dryer and it should have a wiring diagram to tell you which of the wires are the hots and neutral and what colors they are. The 4 wire plugs are required now by the NEC (National Electric Code)
- Q:Can old speaker wire cause a little static sound??
- The only way I could see old wire causing what you describe is if there is a lot of oxidation on the part where it is making contact. It is possible, but not likely and just simply jiggling things should cause the oxidation to come off, if that is what it is.
- Q:A street lamp weighs 200 N. It is supported by two wires that form an angle of 130° with each other. The tensions in the wires are equal.What is the tension in each wire supporting the street lamp?If the angle between the wires supporting the street lamp is reduced to 100°, what is the tension in each wire?
- Problem 1: If the tension in the two wires are equal, the angle they make with the horizontal must also be equal. Always remember that a horizontal line is a straight angle; hence, it has a measurement of 180°. Let's look for the angle the wires make with the horizontal. 130 + x + x = 180 130 + 2x = 180 2x = 180 - 130 2x = 50 (Divide both sides by 2) x = 25° Each wire makes a 25° angle with the horizontal. We can now find the tension. The mass must be divided by 2. Using trigonometry, let's find the tension force. The divided weight of the lamp shall be the opposite side, and the tension force shall be the hypotenuse. sin 25° = (200 / 2) / Ftens Ftens = 100 / sin 25° Ftens = 236.62 N (Answer) The tension is 236.62 N in each wire. Problem 2: We use the same approach. 100 + x + x = 180 100 + 2x = 180 2x = 180 - 100 2x = 80 (Divide both sides by 2) x = 40° Each wire makes a 40° angle with the horizontal. Calculate the tension force. sin 40° = (200 / 2) / Ftens Ftens = 100 / sin 40° Ftens = 155.57 N (Answer) The tension is 155.57 N in each wire. Hope this helps!
- Q:I have DirectWay and have a wireless router. I recently hardwired my computer in because I kept losing signal. The distance between my computer and the router is about 30 ft. But since I hardwired my computer in, it seems slower than when I ran the wireless adapter, i.e downloading videos and music. I was under the impression that wired was faster. What gives????
- It's possible that your wired network card drivers aren't installed properly, or maybe your computer's trying to use both...try disabling the wireless to force the software to only use the wired card.
- Q:A vertical straight wire carrying an upward 14.2 A current exerts an attractive force per unit length of 7.80E-4 N/m on a second parallel wire 7.60 cm away. What is the magnitude of the current that flows in the second wire?
- For a current I1 = 14.2 Amperes and radial separation between wires r =0.076 m, the magnetic field at wire 2 is B =0.000037368 Tesla If current I2 = 21 Amperes then the force per meter is F/ΔL =0.000784 Newtons/m hyperphysics.phy-astr.gsu.edu/hba... Goodbye
- Q:i Have a problem with my xeno portable dvd player..the ribbon wire inside is damaged..can somebody tell me where to buy a ribbon wire?
- Electronic parts stores carry ribbon wires, but there are many different kinds of ribbon wires, and they would have to look at the wires in the dvd player to know what kind you need. The biggest problem with the wires is connecting them to the circuit boards. An electronics repair shop might have a piece of ribbon wire they can adapt to fit your player. .
- Q:Can you swap out a 1984 Porsche 944 wiring harness with a different car's wiring harness? If which car. Thank you.
- You can order a new 944 wiring harness, but it is a lot of work. Much easier is to just get a good manual with a wiring diagram, and replace only the damaged wires, splicing at little as possible, as you go. I assume you just have some heat cracked wires, unless you had a fire or something? You can't take the harness from another car because all the connectors are going to be the wrong type, gender, or location. Especially things like the brainbox harness plug, etc.
- Q:two straight and parallel wires are separated by 6 cm. there is a 2 A current flowing in the first wire. if the magnetic field strength is found to be zero between the two wires at a distance of 2.2 cm from the first wire, what is the magnitude and direction of the current in the second wire?
- If the magnetic field at 2.2cm is zero it means that at that distance the fields produced by the two wires cancel out. At 2.2cm from the first wire the field strength is B= uI/ 2pi r ... . where u is the permitivity of free space, 4.0 x 10^-7 N/A^2 B= (4.0 x 10^-7 N/A^2)( 2 A)/ 2(3.14)(0.022m) B=( 8 x10^-7)/(0.138) B= 5.79 x 10^-6 Tesla The magnitude of the magnetic field from the other wire must be equal in magnitude at 3.8cm away (6- 2.2) and opposite in direction. Using the right hand rule (thumb points in direction of current and fingers curl around the wire to show the direction of the magnetic field) you can see that for the magnetic fields to be in opposite direction between the two wires the current must be flowing in the same direction as the first wire. Using the formula for magnetic field strength you can then determine the current needed. 5.79 x10^-6 T= (4.0 x 10^-7) I/ 2 (3.14)(0.038m) THen solve for I I= (5.79 x 10^-6 T)(2)(3.14)(0.038m)/ 4.0 x 10^-7) I= 3.45 A Therefore there is a current of 3.45A in the wire and it is flowing in the same direction as the first.
- Q:Hello, i am trying to hook up power windows in my truck. the motor has two wires and the switch has 3 wires. i just need the relay. i just need to know what kind of relay i need and how to hook it up. i know i need a reversing relay and that it needs to use the 3 switch wires along with the two motor wires and the two power wires. does anyone know what this relay is called and where i could find it online? thank you.
- Hold your horses here as this gets real complicated real fast Motor has two wires one is pos and the other is neg on the down stroke. Reverse applies on the up stroke. Three wires from switch. Center is supply (either ground or 12 v.d.c) Other two are outputs from the supply. (ground is suggested) There are literally 50 different relay types you can use depending on the application. Some are three pin some are four pin and some are five pin. The five pin is the most common type used for power windows. I suggest going to the local junk yard and find a ford F series truck with fuel injection Open hood and look on drivers inner fender well on back side of air filter box. There will be two or three relays under a small plastic cover mounted on slip mounts and if you pull up hard enough they will come off. Cut the wires to these relays as far back towards the dash as you possibly can (to get the most wire possible) You will need two of them per window. These are the commonly sold five pin relays and once you have them then e-mail me through my avatar and I can direct you exactly what wire to what pin to what wire on switch and then to motors.
- Q:i have a 00 gmc yukon and tried installing my cd deck. i pulled off the original harness from the stock deck radio and now its just all wires (its my first so i didnt know), i connect the alpine deck wires and tried to connect them all together. i had a few figure out, except a small noise coming from my stock tweeters every time i step on the pedal. then my speed odometer sensor was going with the bass of my subs... whats wrong? can someone find me a chart of what color wires supposed to go where? thanks for your help
- do now no longer combine the speaker outputs out of your head unit. you could harm the final unit this type. you at the instant are no longer harming something via using working a a hundred-watt speaker on a lots cut back powered amplifier (and you will now no longer inevitably boost the sound intense high quality via using switching to a speaker with a cut back skill score). The a hundred-watt score is only the optimal skill it truly is stated for this speaker; it does now no longer propose that it demands that lots skill. in case you pick for extra advantageous skill than your CD deck substances, you will might prefer to function an outdoors amplifier.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Anti Climb Wall Spike Barbed Wire for Sale (ISO9001)
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2 m.t
- Supply Capability:
- 5000 m.t/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products