Q:How many watts are the street lights?

Power ranging from fifty to several thousand, as well as mercury vapor lamps, sodium lamps, LED lights and the like

Q:Technical requirements for LED street lamps

The average illuminance of illumination uniformity (uniformityof, road, surfaceilluminance) is 0.48, and the spot ratio is 1:2.5. accord with road illuminance. The actual 1/2 center spot reaches 25LUX, and the 1/4 center light intensity reaches 15LUX, the minimum light intensity is 4LUX at 16 meters, and the overlap light intensity is about 6LUX.6., it has a very good application prospect in the new city lighting. Dimming for depth, and colors and other features are not subject to dimming.7. meet the humidity: less than 95.

Q:How high should the installation height of the LED street lamp be?

In order to avoid glare, you can choose the f (d) (E), the installation height of street lights should not be less than 4.5m. The distance between the poles of the street lamp can be 25 to 30m, and the distance between the lamp posts entering the curve should be reduced appropriately.

Q:How to determine the power of LED street light?

It is difficult to determine the power of the LED street lights used on a particular section of the road, but it can be estimated from the street lights seen

Q:How much is the LED street lamp with six meter pole?

It depends on the price of the lamp and the height of the lamp postDomestic LED street lamps, the general price can be 7-8 yuan per watt. 100W street lights, for example, cost about 800 dollars. Of course, this is to buy an end customer, and if you are an agent, the price will definitely be cheaper.

Q:Do 150wled street lights use much?

The lamp used in outdoor, to be waterproof and dustproof, so the lamp must be sealed, sealed lamps of water vapor temperature in extreme weather conditions more than 100 degrees, LED continuous work in such a high temperature environment, LED lights if the heat is not good, it is very easy to decay or bad lighting seriously.

Q:The 6 meter high watt LED bulb lamp should match

Generally equipped with 30W led, Yangzhou is the country's largest production base of street lights, manufacturers can visit to see.

Q:How can I get the LED street light?

Products must be certified in order to export, and if you do not have the right to export, you have to rely on agents, export companies might as well do domestic, I can also do certification agent

Q:What are the necessary tests for the factory inspection of the LED street lamp?

Is a common Street shell is an aluminum plate arranged above the inside a lot of 3W or 1W beads with lens

Q:The same brand of chips, how to judge the quality of LED lights?

Pay attention to the LED chips used in LED street lights. LED chip is the core part of LED street lamp, and the quality of LED chip affects the service life, brightness, light color of LED street lamp, etc.. The general import LED chip slightly better quality (such as Puri and CREE) as a municipal engineering, personal recommendations in addition to the two kinds of chips are not other, Liaoyuan century products outdoor Puri CREE, indoor use of wafer,