SOLAR PANEL POLY FOR 260W,SOLAR PANEL FOR GOOD QUALITY WITH HIGH EFFICIENCY
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2600 watt
- Supply Capability:
- 26000 watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Item specifice
Features of our products:
• High conversion efficiency mono/poly-crystalline amorphous silicon solar cells
• Modules incorporate high performance bypass diodes to minimize the power drop caused by shading
• High transmittance, low-iron tempered glass
• High performance EVA encapsulant to prevent destroying and water.
• AI frame: without screw, corner connection. 8 holes on the frame can be installed easily
• Good performance of preventing from atrocious weather such as wind and hails
Polycrystalline Silicon Solar Modules 48Cell-195W Specification
ELECTRICAL PERFORMANCE | |||
Power output | P max | W | 195 |
Power output tolerances | ΔP max | W | 0/+5 |
Module effi ciency | η m | % | 14.7 |
Voltage at Pmax | V mpp | V | 23.7 |
Current at Pmax | I mpp | A | 8.03 |
Open-circuit voltage | V oc | V | 30.1 |
Short-circuit current | I sc | A | 8.65 |
Product Description:
This installation Manual contains essential information for the electrical and mechanical installation that your must know before installing CUSTOMER PV modules. This also contains safety information you need to be familiar with .
CUSTOMER does not assume responsibility and expressly disclaims liability for loss, damage, or expense arising out of in anyway connected with installation, operation, use or maintenance of the PV modules. No responsibility is assumed by CUSTOMER for any infringement of patents or other rights of third parties that may result from use of PV module.
Solar panel working process
In addition to being the ultimate source of all life on earth, the sun is an infinitely renewable, completely pollution-free source of electricity. Instead of burning fossil fuels dug up from the ground in a big power plant – a very 19th century, industrial age approach, when you think about it – solar panels convert sunlight directly into electricity, with no harmful emissions.
Specification of Solar Monocrystalline Series
- Optimal permutation on solar cells to keep enough heat diffusion, decreases hot spot effect.
- High quality and anti-ageing EVA, weather resistance backside raw materials assure reliable solar panels.
- Passed 5400Pa mechanical loads testing by UL, can withstand bad and high mechanical load working environment.
- With good sealed performance, moisture resistant, aging resistance, high/low temperature resistant, the inner terminals of our junction box owns good electrical performance transmission. Bypass diodes used can avoide hot spot effect and damages to panels. Output cables and mating connectors are safe and reliable for installation application. Adopt weather resistance, sealed, good sticky silica gel when assembling.
- Strict quality inspection on each procedure and 100% electrical performance test to meet power requirements.
- 0~+3% power tolerance.
- classification for all the panels in order to improve the integral performance of system and solar panel life span.
- TUV、UL、MCS、CE、ROHS、Golden Sun certified
- Underwriting of 25years output power warranty by The People's Insurance Company of China.
- Q:Can solar panels be used in areas with frequent power outages?
- Yes, solar panels can be used in areas with frequent power outages. Solar panels generate electricity from sunlight, which means they can continue to produce power even during power outages. By installing battery storage systems, the excess energy generated during the daytime can be stored and used during periods of low sunlight or power outages. This allows solar panels to provide a reliable source of electricity in areas with frequent power outages.
- Q:Can you connect a solar panel to speakers that use a wall outlet plug, by cutting the plug off and connect copper wire between the solar panel and cord?Confusing i know. I'm trying to connect a solar panel to speakers for a science project.
- If you mean powered computer speakers, I think you have a chance. They're low power, and often low voltage. What you want is a parent or your science teacher to give you advice. You will want to find the kind of speaker that has a power adapter that plugs into the wall. The power adapter will put out, say, 6 volts at 200 mA. That's what you want to replace with the solar panel, not wire to the part that plugs into the wall.
- Q:Hi everyone, I am a novice in solar energy system. I want to know if I am on the right track. Recently I bought a 30 W solar panel, 5 Amp controller, and a 22 Ah battery, how many watts and what kind of INVERTER do I need? I did an research some said 50 W and some said 300 W. And am I right on the 5 amp controller and 22 Ah battery to provide larger output of electric, or the higher the # the greater output for 30 W solar panel?Really appreciate for anyone who help!!!
- With a 30 watt panel, producing about 2 amps, your not going to have much power from that. A 22 AH battery will give you 2 AH of usage. A battery should never be drained below 50%. What this works out to be is simply Amp draw for 2 hours. Which equals to 2V light bulb that draws amp for 2 hours. Not much. Now to replace that usage with your 30 watt panel, provided the panel is clean and in max sunlight, it will take 6 hours. If you attach an inverter to your system for 5 Volt Usage then the DC voltage drawn from the battery is very high. Example: Say you use a 5 Volt component that requires 50 Watts per hour to operate. The inverter will draw 5 Amps out of the Battery every hour to operate that component. That gives you and /2 of use before the battery is down to 50%.. Maybe that will be enough to charge up a standard Laptop battery. I have 2 30 Watt panels that produce 5 Amps, 4 6V batteries that have 480 AH and a 25 Amp Controller with a booster that increase the amp output to 20 Amps per hour. I live full time in an RV and raise the panels to get max output when I am parked. This system provides me with all the 5V throught the 500 Watt inverter that I need. Good luck on you system.
- Q:Can solar panels be used for powering agricultural equipment?
- Yes, solar panels can be used for powering agricultural equipment. Solar energy can be harnessed and converted into electricity through photovoltaic cells in solar panels. This electricity can then be used to power various agricultural equipment such as water pumps, irrigation systems, electric fences, and even machinery like tractors and harvesters. Solar-powered agricultural equipment offers a sustainable and cost-effective alternative to traditional fossil fuel-powered machinery, reducing both carbon emissions and operating costs for farmers.
- Q:was looking at a few different sites, here is one of them
- There okorder
- Q:How do solar panels affect roof weight load?
- Solar panels can increase the weight load on a roof, as they require mounting brackets and additional equipment to be installed. However, modern solar panels are designed to be lightweight and are typically not heavy enough to cause any significant structural damage to the roof. It is important to consult with a professional to assess the roof's load-bearing capacity before installing solar panels.
- Q:I have a 2V .5W solar panel and I want to get a battery that can be charged by the solar panel that can then be used to power a 2V .5W fan. Ideally I want all the components to be connected and able to run without interaction. I have very little knowledge in regards to this field which is why I have come to yahoo answers. Any help would be greatly appreciated.
- Get the origanal specs and go from there as when it runs with orginal specs then the solar panel runs properly
- Q:I purchased some small 3.6 v 70mA solar panels online. I have no experience with solar panels. I am confident of the layout of the parallel circuit I want to create, however I don't know how to properly connect the tabs that come from the sides of the panels. Any help on connecting them?
- Okay okorder /... That metal strip up top is negative, if you turn it around and look on the back you will see another metal strip there which would be positive. When it comes to wire, I use 24awg audio wire I got from radio shack, they only have solid wire at this gauge at my local radio shack but stranded is preferable. Solar cells are super fragile too so you're going to want to be extra careful. I then take a length of stripped wire and lay it over the silver tab, I hold it in place with some electrical tape at each end. Here is where experience comes into play, you can't use just any solder when making these connections. Well, you can but it takes a hell of a lot more time and effort to get it right. Make sure to use 96/4 silver-bearing solder. I'm not sure why but 60/40 solder does not adhere very well to the cell and usually the soldering iron has to stay on the cell for far too long which ends up discoloring it. If you need help on how to solder send me a message, you need to know how to properly tin the iron, since this is such a meticulous and unforgiving soldering job.
- Q:How do solar panels affect the property's overall sustainability?
- Solar panels can significantly enhance a property's overall sustainability by harnessing renewable energy from the sun. They reduce dependence on fossil fuels, decrease carbon emissions, and contribute to energy independence. Additionally, solar panels can generate surplus electricity that can be sold back to the grid, further enhancing the property's sustainability and potentially providing financial benefits.
- Q:can this amount of solar charge these batteries.
- Wow I think that your battery are too big or in othercase your solar system panels are too small. But making some calcs if you connect your panels in parallel you will have 30 Amps of Recharge for your batteries. Assuming that your batteries are discharged to .75 V/C you will need at least (. x Ah removed)/Recharge Amps = (. x 550Ah)/30A, that means that you will need 20 Hours to recharge your batteries Literally this is imposible to have fully charged your batteries for a proper application you will need 65 Amps from your panels to recharge your batts in 4 hours or de-rate your batteries to 00 Ah
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
SOLAR PANEL POLY FOR 260W,SOLAR PANEL FOR GOOD QUALITY WITH HIGH EFFICIENCY
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 2600 watt
- Supply Capability:
- 26000 watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
