Ceramic Fiber Paper for Inner Insulation Lining
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 kg
- Supply Capability:
- 1000000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction
Ceramic fiber paper is made from ceramic fiber with mixing of binders by continuous wet modeling process. The highest temperature is 1600℃
Characteristics
Asbestos-free
Accuracy of the thickness and High flexibility
High strength and strong tensile properties
Resistance to erosion
Low thermal conductivity and resistance to thermal shock
High electrical insulation
Typical Applications
Used in household heat facilities do slice
Used in Electric appliances insulating materials
Used in High temperature insulation sealing gasket
Used in High temperature filter material
Used in automotive heat shields and silencer insulation
Used in Seal materials for furnace expansion joints
Used in Furnace, the furnace door, top seal
Used in Fire protection
Used in Instead of asbestos
Image of Ceramic Fiber Paper
product code | WHCF-61 | HWCF-62 | WHCF-64 | WHCF-65 | WHCF-66 |
1000 | 1260 | 1430 | 1500 | 1600 | |
Classification Temp. ( ℃) | 1000 | 1260 | 1430 | 1500 | 1600 |
Density: (Kg/m3 ) | 210 | 210 | 210 | 160 | 180 |
Linear Shrinkage(%)(℃*24h) | 3.5 (850) | 3.0 (1100) | 3.2(1200) | 3.6(1400) | 3.4(1500) |
Rupture strength (MPa) | 0.50 | 0.65 | 0.70 | 0.60 | 0.60 |
Organic content (%) | 10 | 8 | 6 | 7 | 7 |
thermal conductivity Kcal/mh℃(W/mK) (ASTM C-201Average Temp. As belows) | |||||
400℃ | 0.06 | 0.07 | |||
600℃ | 0.08 | 0.09 | 0.08 | 0.08 | 0.07 |
800℃ | 0.14 | 0.13 | 0.12 | 0.12 | 0.11 |
1000℃ | 0.17 | 0.16 | 0.16 | 0.15 | |
chemical composition (Post-burnt) | |||||
Al2O3 | 42 | 46 | 35 | 40 | 70 |
SiO2 | 54 | 50 | 44 | 58.1 | 28 |
ZrO2 | 15.5 | ||||
Cr2O3 | 2.5 | ||||
Dimension (mm) | 40000×600/1000/1200×0.5,1;20000×600/1000/1200×2;10000×600/1000/1200×3,4,5,6. |
Note:1. The products can process into gasket sheet, more details information please look at page12 for your reference.
2. More details information of Soluble Fiber Eco-product and relevant products please look at page4 for your reference.
FAQ
Q1: How do you control the products quality?
A1: With strict quality control system throughout the materials selection and production process, our refractory and ceramic fiber products quality is effectively controlled to meet customer requirements.
From the raw materials selecting, our quality control begin. The quality certificates of raw materials are required and each batch will be tested before using. During production, the quality control is conducted by workers and then each piece will be sorted and examined by quality supervisors.
Q2: What`s the lead time for my order?
A2: It depends on customers’ requirements and our production schedule. And usually we need 30-60 days for refractory bricks,10-25 days for unshaped refractory materials and 10-20 days for ceramic fiber blankets.
- Q:Is aluminum silicate fiber poisonous?
- Then use the compressed air jet or use the wire throwing machine to turn the yarn into a fiber. After the cotton collector sets the cotton, it forms the ceramic fiber cotton. In the whole process of production, it can be found that the raw material does not contain toxic substances. Compared with asbestos, it is a substitute product of asbestos and contains no carcinogens.
- Q:Glass fiber cotton, aluminum silicate cotton, rock wool, what's the difference between these three?
- Three kinds of materials are heat insulation materials, applications and temperature resistance is different.Glass fiber cotton is a kind of excellent performance of inorganic non-metallic materials, variety, has the advantages of good insulation, strong heat resistance, good corrosion resistance, high mechanical strength, but the disadvantage is brittle, poor wear resistance, the maximum temperature of four less than Baidu.
- Q:The difference between the ceramic fiber blanket and rock cotton blanket
- Ceramic fiber lining: low thermal conductivity of ceramic fiber lining in the average temperature of 400 degrees, the thermal conductivity is less than 0.1w/mk, the average 600 degrees less than 0.l5 w/mk, average 1000 degrees less than 0.25w/mk, about l/8 as a lightweight clay brick, lightweight refractory lining l/10, adiabatic effect.The construction of ceramic fiber lining is simple: no expansion joints are needed during construction, and the construction personnel can be started after the basic training. The technical factors of construction have little influence on the insulation effect of the lining.
- Q:What are the main differences between an ordinary furnace and a ceramic fiber furnace?
- Energy saving: ordinary furnace heat loss, heat rate, furnace insulation can. The holding time of ceramic fiber furnace is ten times higher than that of ordinary furnace, and it is easy to quench and quench.
- Q:What is the difference between the ceramic fiber cloth and the high silicon oxygen cloth?
- 1. Ceramic fibers are short fibers that need to be strengthened and toughened by other objects. They are generally toughened by glass fiber and stainless steel wire.2 and high silicon oxygen is long fiber, no need to toughen by other objects.3 short, high silicon oxygen resistance to high temperature, Suzhou Dexin ceramic high silica cloth of silica content is greater than or equal to 96% temperature up to 1700 DEG C.
- Q:Ceramic fiber material fire shutter door how many square?
- If the above two kinds of roller blinds, really true to do, the former per square meter at least 500 yuan, and the latter at least 400 yuan per square meter. Otherwise, there must be a problem.
- Q:What is the density of ceramic fiber modules? The best insulation effect
- Ceramic fiber module density is only a standard in the world, is 220Kg/m fand, but in the actual application, according to the heat treatment furnace, furnace temperature, combustion medium, temperature rise requirement of ceramic fiber module density in 200-240Kg/m fand, ceramic fiber blanket, because the processing of ceramic fiber module uses double roller today advanced technology and technology of silk, fiber length of the ceramic fiber blanket which produced in 80-130 mm, so the maximum density of the ceramic fiber module is more than the density, 240Kg/m fand, a large amount of fiber fracture, the fracture rate is as high as 48%. So after the actual verification at home and abroad of tens of thousands of industrial furnaces, the best density of ceramic fiber module is fand 220Kg/m.
- Q:Aluminum silicate needle carpet and ceramic fiber insulation performance of the good
- Aluminosilicate ceramic fiber has two different production processes, respectively, the rejection process and the blowing process. The carpet produced by the spinning process has long fiber length, high tensile strength and wide range of use. The blanket produced by blowing process is short in length and easy to break, and the scope of application is relatively narrow.
- Q:Should the ceramic fiber furnace be compacted?
- In view of the miniature furnace chamber, the ceramic fiber furnace can be selected, and once the furnace is formed, the length of the furnace is longer.
- Q:What is the diameter of the ceramic fiber? How to mix?
- Fiber diameter: rejection fiber more coarse, rejection fiber generally 3.0-5.0 - m, spinneret fiber is generally 2.0-3.0 - m;
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Ceramic Fiber Paper for Inner Insulation Lining
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 kg
- Supply Capability:
- 1000000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords