Non-Pressurized Heat Pipe Solar Water Heater System New Designed
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Non-Pressure Solar Water Heater:
Non-pressure Solar Heater is one of the most economical solar water heating device with pretty high efficiency at the same time. It consists of hot water storage tank, solar vacuum tubes with mouth plug in storage tank, and bracket supporting tank and tubes.When cold water in evacuated tubes is heated with solar irradiation, as the specific gravities of hot water and cold water are different, hotter water goes upward to storage tank and colder water goes downward to glass tubes. through this continuous circulation, the cold water in storage tank will be gradually heated till sunset.
Specialty:
1. High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
2. Heat collecting efficiency is at least 20% above common solar systems.
3. Work in all day and all season: no matter any corner of the world, this system can work well even -40℃ to avoid the tube freezing problem.
4. Reliability: No water following through the tube, so water scale can not generate and tube cracks could be avoided, the system still can keep working even with some damaged tubes.
5. It can connect with water tap and work automatically with pressure0.6Mpa, bring enjoyable washing experience.
6. Safety: P/T valve would release pressure and temperature to protect tank..
Technical Specification:
1. Outer tank material: SUS304 stainless steel or powder coated color steel
2. Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
3. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
4. Frame material: 1.2mm thickness stainless steel
5. Insulation material: 55mm thickness polyurethane
6. Suitable for mains pressure water(up to 8 bar/116psi)
7. Easy plug-in installation
8. Install the T/P valve on the pressurized tank
9. Seal material: Stabilized High Temperature Silicon
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 8 bar/116psi)
Easy plug-in installation
Install the T/P valve on the pressurized tank
Seal material: Stabilized High Temperature Silicon
19. Vacuum Tube | 20. Size (mm) | 21. Φ47*1500 / Φ58*1800 / Φ70*2100 | |||||
22. Tube (pcs) | 23. 10 / 12 / 15 / 18 / 20 / 22 / 24 / 30 / 36 / 42 | ||||||
24. Material | 25. Borosilicate 3.3 glass, magnetron spluttering selective coating | ||||||
26. Coating | 27. Single-target AL-N/AL or Three-target AL/N-Cu-SS | ||||||
28. Water Tank | 29. Capacity | 30. 80L ~ 500L for hot water storage tank | |||||
31. Inner tank | 32. Food-grade stainless steel SUS304-2B / SUS316 | ||||||
33. Insulation | 34. High-density polyurethane foam with 70~80 hour heat preservation | ||||||
35. Tank shell | 36. Food-grade stainless steel SUS304-2B | ||||||
37. Bracket | 38. Shaped strong aluminum alloy structure adaptable for flat or slope roof | ||||||
39. Accessories | 40. Anti-aging silicon seals, Dustproof seals, Air-vent cap, Stainless screws | ||||||
41. Auxiliary Devices | 42. Assistant tank, Intelligent controller, Electrical heater, Magnesium anodes | ||||||
43. Tilt Angle | 44. 25 ~ 50° | ||||||
45. Water Output | 46. 45 - 95°C | ||||||
47. Hail Resistance | 48. Φ25mm diameter | ||||||
49. Model Number | 50. Solar Vacuum Tube | 51. Tank 52. Liter | 53. System 54. Liter | 55. Container Loading Qty /sets | |||
56. Size /mm | 57. Qty /pcs | 58. 20GP | 59. 40GP | 60. 40HQ | |||
61. VNS-58SA12-100 | 62. Φ58*1800 | 63. 12 | 64. 100 | 65. 132 | 66. 58 | 67. 119 | 68. 140 |
69. VNS-58SA15-130 | 70. 15 | 71. 130 | 72. 170 | 73. 54 | 74. 108 | 75. 131 | |
76. VNS-58SA18-150 | 77. 18 | 78. 150 | 79. 198 | 80. 43 | 81. 86 | 82. 105 | |
83. VNS-58SA20-170 | 84. 20 | 85. 170 | 86. 223 | 87. 40 | 88. 80 | 89. 97 | |
VNS-58SA24-200 | 24 | 200 | 263 | 35 | 70 | 85 | |
VNS-58SA30-250 | 30 | 250 | 329 | 28 | 56 | 68 | |
VNS-58SA36-300 | 36 | 300 | 395 | 23 | 47 | 57 |
Product Show
Our Services
1. OEM service
2. Warranty: 5 years
3. Considerable after sale service
Color steel Compact pressure Thermal solar heater
FAQ:
1. What’s the delivery time?
10 days after receiving deposit.
2. How long is the warranty?
5 years for whole system, 1 year for accessory
3. What’s your production capacity?
6000sets/month
4. What’s the MOQ?
1 set.
5. What’s your payment term?
Container: 30% T/T in advance for deposit, 70% T/T before shipment for fist order.
70% T/T after seeing copy of B/L from second order
Sample: 100% T/T in advance
Other choices: L/C at sight.
6. What certifications do you have?
CE, SOLAR KEYMARK, SRCC and etc.
- Q:Are solar collectors safe?
- Yes, solar collectors are safe. They do not emit harmful emissions or produce hazardous waste during operation. Additionally, they have undergone rigorous testing and are designed to meet safety standards to ensure the well-being of both users and the environment.
- Q:Can solar collectors be used for heating outdoor spaces such as patios or terraces?
- Yes, solar collectors can be used to heat outdoor spaces such as patios or terraces. Solar collectors can absorb sunlight and convert it into thermal energy, which can then be used to heat water or air. This heated water or air can be circulated through pipes or ducts to provide warmth to outdoor spaces, making them comfortable and enjoyable even during colder seasons.
- Q:Can solar collectors be used in grid-tied systems?
- Yes, solar collectors can be used in grid-tied systems. In a grid-tied system, solar collectors are used to harness the energy from the sun and convert it into electricity. This electricity can then be used to power household appliances, lighting, and other electrical devices. The excess electricity generated by the solar collectors can be fed back into the grid, allowing the homeowner to receive credits or payments from the utility company. Grid-tied systems with solar collectors are a popular choice for homeowners looking to reduce their dependence on fossil fuels, lower their electricity bills, and contribute to a more sustainable energy future.
- Q:Solar collectors and tank water can not cycle what is the reason
- Pipe clogged. If the exclusion of the other two cases, then the possibility of a large pipe block, including the pipeline frozen, debris blockage are possible, if the pump is easier to burn the pump, need special attention.
- Q:Can solar collectors be used for heating museums?
- Yes, solar collectors can be used for heating museums. Solar collectors are designed to absorb sunlight and convert it into heat, which can then be used for various purposes including heating. By utilizing solar collectors, museums can reduce their reliance on traditional heating systems and lower their energy costs while also promoting sustainability.
- Q:Can solar collectors be used in greenhouses?
- Yes, solar collectors can be used in greenhouses to harness solar energy for heating and powering various systems within the greenhouse.
- Q:Can solar collectors be used for district heating?
- Yes, solar collectors can be used for district heating. Solar thermal systems can be integrated into district heating systems to provide hot water or space heating for multiple buildings in a community or district. This helps reduce the dependency on fossil fuels and lowers carbon emissions by utilizing renewable energy from the sun.
- Q:Can solar collectors be used in historical buildings?
- Yes, solar collectors can be used in historical buildings. However, the installation must be planned carefully to preserve the architectural integrity of the building. This may involve incorporating discreet or hidden solar collectors that blend in with the building's design, or locating them in less visible areas. Additionally, any alterations made to historical buildings should be approved by relevant preservation authorities to ensure they meet the required standards.
- Q:How long does it take to recoup the cost of installing solar collectors?
- The time it takes to recoup the cost of installing solar collectors can vary depending on several factors such as the initial investment, energy consumption, local solar resource, and available incentives. On average, it takes about 5 to 15 years to recover the upfront costs through energy savings. However, with government incentives and falling solar panel prices, the payback period has been decreasing and making solar installations more financially attractive in recent years.
- Q:Can solar collectors be used in residential homes?
- Yes, solar collectors can indeed be used in residential homes. In fact, they are increasingly being adopted as a sustainable and cost-effective solution for generating renewable energy at the residential level. Solar collectors, such as photovoltaic panels or solar water heaters, are installed on rooftops or in open spaces to harness the power of the sun and convert it into electricity or heat, respectively. This allows homeowners to reduce their dependence on traditional energy sources and lower their carbon footprint, while also potentially saving money on utility bills.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Non-Pressurized Heat Pipe Solar Water Heater System New Designed
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords