Non-Pressurized Heat Pipe with Copper Solar Water Heater System
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Non-Pressure Solar Water Heater:
Non-pressure Solar Heater is one of the most economical solar water heating device with pretty high efficiency at the same time. It consists of hot water storage tank, solar vacuum tubes with mouth plug in storage tank, and bracket supporting tank and tubes.When cold water in evacuated tubes is heated with solar irradiation, as the specific gravities of hot water and cold water are different, hotter water goes upward to storage tank and colder water goes downward to glass tubes. through this continuous circulation, the cold water in storage tank will be gradually heated till sunset.
Specialty:
1. High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
2. Heat collecting efficiency is at least 20% above common solar systems.
3. Work in all day and all season: no matter any corner of the world, this system can work well even -40℃ to avoid the tube freezing problem.
4. Reliability: No water following through the tube, so water scale can not generate and tube cracks could be avoided, the system still can keep working even with some damaged tubes.
5. It can connect with water tap and work automatically with pressure0.6Mpa, bring enjoyable washing experience.
6. Safety: P/T valve would release pressure and temperature to protect tank..
Technical Specification:
1. Outer tank material: SUS304 stainless steel or powder coated color steel
2. Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
3. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
4. Frame material: 1.2mm thickness stainless steel
5. Insulation material: 55mm thickness polyurethane
6. Suitable for mains pressure water(up to 8 bar/116psi)
7. Easy plug-in installation
8. Install the T/P valve on the pressurized tank
9. Seal material: Stabilized High Temperature Silicon
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 8 bar/116psi)
Easy plug-in installation
Install the T/P valve on the pressurized tank
Seal material: Stabilized High Temperature Silicon
19. Vacuum Tube | 20. Size (mm) | 21. Φ47*1500 / Φ58*1800 / Φ70*2100 | |||||
22. Tube (pcs) | 23. 10 / 12 / 15 / 18 / 20 / 22 / 24 / 30 / 36 / 42 | ||||||
24. Material | 25. Borosilicate 3.3 glass, magnetron spluttering selective coating | ||||||
26. Coating | 27. Single-target AL-N/AL or Three-target AL/N-Cu-SS | ||||||
28. Water Tank | 29. Capacity | 30. 80L ~ 500L for hot water storage tank | |||||
31. Inner tank | 32. Food-grade stainless steel SUS304-2B / SUS316 | ||||||
33. Insulation | 34. High-density polyurethane foam with 70~80 hour heat preservation | ||||||
35. Tank shell | 36. Food-grade stainless steel SUS304-2B | ||||||
37. Bracket | 38. Shaped strong aluminum alloy structure adaptable for flat or slope roof | ||||||
39. Accessories | 40. Anti-aging silicon seals, Dustproof seals, Air-vent cap, Stainless screws | ||||||
41. Auxiliary Devices | 42. Assistant tank, Intelligent controller, Electrical heater, Magnesium anodes | ||||||
43. Tilt Angle | 44. 25 ~ 50° | ||||||
45. Water Output | 46. 45 - 95°C | ||||||
47. Hail Resistance | 48. Φ25mm diameter | ||||||
49. Model Number | 50. Solar Vacuum Tube | 51. Tank 52. Liter | 53. System 54. Liter | 55. Container Loading Qty /sets | |||
56. Size /mm | 57. Qty /pcs | 58. 20GP | 59. 40GP | 60. 40HQ | |||
61. VNS-58SA12-100 | 62. Φ58*1800 | 63. 12 | 64. 100 | 65. 132 | 66. 58 | 67. 119 | 68. 140 |
69. VNS-58SA15-130 | 70. 15 | 71. 130 | 72. 170 | 73. 54 | 74. 108 | 75. 131 | |
76. VNS-58SA18-150 | 77. 18 | 78. 150 | 79. 198 | 80. 43 | 81. 86 | 82. 105 | |
83. VNS-58SA20-170 | 84. 20 | 85. 170 | 86. 223 | 87. 40 | 88. 80 | 89. 97 | |
VNS-58SA24-200 | 24 | 200 | 263 | 35 | 70 | 85 | |
VNS-58SA30-250 | 30 | 250 | 329 | 28 | 56 | 68 | |
VNS-58SA36-300 | 36 | 300 | 395 | 23 | 47 | 57 | |
Product Show
Our Services
1. OEM service
2. Warranty: 5 years
3. Considerable after sale service
Color steel Compact pressure Thermal solar heater
FAQ:
1. What’s the delivery time?
10 days after receiving deposit.
2. How long is the warranty?
5 years for whole system, 1 year for accessory
3. What’s your production capacity?
6000sets/month
4. What’s the MOQ?
1 set.
5. What’s your payment term?
Container: 30% T/T in advance for deposit, 70% T/T before shipment for fist order.
70% T/T after seeing copy of B/L from second order
Sample: 100% T/T in advance
Other choices: L/C at sight.
6. What certifications do you have?
CE, SOLAR KEYMARK, SRCC and etc.
- Q:Can solar collectors be used in low-rise buildings?
- Yes, solar collectors can certainly be used in low-rise buildings. In fact, low-rise buildings are often ideal for solar collector installations as they usually have ample roof space and can benefit from the direct exposure to sunlight. Using solar collectors in low-rise buildings can help generate clean and renewable energy, reducing dependency on traditional power sources and lowering electricity bills.
- Q:Can solar collectors be used for heating shopping centers?
- Yes, solar collectors can be used for heating shopping centers. Solar thermal systems can be installed on the rooftops or as ground-mounted systems to collect solar energy and convert it into heat. This heat can then be used for space heating and water heating in shopping centers, reducing the reliance on fossil fuels and lowering energy costs.
- Q:Can solar collectors be used for refrigeration?
- Yes, solar collectors can be used for refrigeration. Solar thermal energy can be harnessed and converted into cooling power using absorption refrigeration systems. These systems use solar collectors to heat a working fluid, which then drives a refrigeration cycle to produce cold temperatures for cooling purposes. This sustainable and efficient technology is especially beneficial in areas with abundant sunlight and high cooling demands.
- Q:Can solar collectors be integrated into the design of a building?
- Yes, solar collectors can be integrated into the design of a building. They can be incorporated into the roof or façade of a building to capture sunlight and convert it into usable energy. This integration not only helps to generate renewable energy but also enhances the aesthetics and sustainability of the building.
- Q:Are there any challenges in integrating solar collectors with existing heating systems?
- Yes, there are several challenges in integrating solar collectors with existing heating systems. One of the main challenges is the compatibility of the existing system with the solar collectors. The heating system may need to be modified or upgraded to accommodate the solar collectors and effectively utilize the solar energy. Additionally, the installation process can be complex and require professional expertise. Furthermore, the intermittent nature of solar energy availability can pose challenges in achieving a consistent and reliable heating output. Adequate storage systems or backup heating sources may be needed to compensate for periods of low solar radiation.
- Q:Can solar collectors be used for heating livestock barns?
- Yes, solar collectors can be used for heating livestock barns. Solar collectors can harness solar energy and convert it into heat, which can then be used to warm up the barns and create a comfortable environment for the livestock. This not only helps to reduce energy costs but also promotes sustainability by utilizing renewable energy sources.
- Q:Are there any financial benefits to installing solar collectors?
- Installing solar collectors offers several financial advantages. Firstly, they have the potential to greatly reduce your electricity bills. By utilizing solar power to generate electricity, you can offset a significant portion of your energy consumption, resulting in lower monthly costs for electricity. Furthermore, numerous countries and states provide financial incentives for the installation of solar collectors. These incentives may include tax credits, grants, and rebates, which can help offset the initial installation expenses. Some regions even have net metering policies, enabling you to sell any surplus electricity back to the grid, further reducing your electricity costs or even earning you money. In addition, solar collectors can enhance the value of your property. Studies have shown that homes equipped with solar panels tend to sell faster and at higher prices compared to those without. This means that the investment in solar collectors can prove beneficial in the long run if you decide to sell your property. Lastly, by installing solar collectors, you can safeguard yourself against escalating energy costs. As traditional energy prices continue to rise, your solar collectors will continue to provide you with free and renewable energy, shielding you from future price hikes. To summarize, the financial benefits associated with installing solar collectors are evident. They can lower your electricity bills, provide financial incentives, increase the value of your property, and safeguard against rising energy costs.
- Q:Can solar collectors be used in combination with solar panels?
- Yes, solar collectors can be used in combination with solar panels. Solar collectors typically work to heat water or air using the sun's energy, while solar panels convert sunlight into electricity. By integrating both systems, one can harness both heat and electricity from the sun, maximizing the overall energy output and efficiency of a solar power setup.
- Q:Can solar collectors be used for generating electricity on smartwatches?
- Solar collectors can potentially be used for generating electricity on smartwatches, although there are certain limitations and challenges to consider. The small size of smartwatches poses a challenge in terms of the amount of solar energy that can be harnessed. The limited surface area available for solar collectors makes it difficult to generate a significant amount of electricity to power the device. Additionally, smartwatches are often worn on the wrist, which may not always be exposed to direct sunlight. This further limits the effectiveness of solar collectors in generating electricity consistently. However, there have been advancements in solar cell technology that are specifically designed for small, portable devices like smartwatches. These solar cells are more efficient in capturing sunlight even in low light conditions and can be integrated into the display or strap of the watch. Some smartwatches already incorporate small solar panels to supplement battery life, although the primary source of power is still typically derived from traditional charging methods. While solar collectors on smartwatches may not be the sole source of power, they can certainly help in extending battery life and reducing reliance on external charging. This can be particularly useful in situations where access to charging outlets is limited, such as during outdoor activities or travel. In conclusion, while solar collectors can be used for generating electricity on smartwatches, their effectiveness is currently limited by the small size and limited exposure to sunlight. However, advancements in solar cell technology may lead to more efficient and practical solutions in the future.
- Q:Can solar collectors be used for heating factories?
- Yes, solar collectors can be used for heating factories. Solar thermal systems, which use collectors to capture and convert sunlight into heat energy, can be integrated into the heating systems of factories. This renewable energy source can help reduce the reliance on fossil fuels and lower carbon emissions, making it an environmentally friendly option for heating large industrial spaces.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Non-Pressurized Heat Pipe with Copper Solar Water Heater System
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
