Q:How can I make rubber products brighter?

Special release agent for rubber products, release agent.Mold release agent is an interface coating used on two surfaces that are easy to adhere to each other. It can make the surface of the material easy to break off, smooth and clean. Mold release agent is used in various molding processes, such as glass fiber reinforced plastics, metal die casting, polyurethane foam and elastomer, injection molding thermoplastic, vacuum foaming sheet and extrusion section. In molding, sometimes other plastics, such as plasticizers, leak to the interface, and then a surface remover is needed to remove it.

Q:Can the rubber surface be painted with paint?

Rubber surface of the original jet printing pattern, etc., how to remove clean, and does not affect the appearance and rubber layer: the way is solvent oil!

Q:Is it necessary to use rubber products for steel structure buildings?

There must be a rubber cushion for the gear of the crane beam, and there is also a rubber cushion between the crane track and the crane beam. Of course, not all deformation joints are rubber, depending on how to choose the design node.

Q:Rubber products on tiles, why tiles yellow?

Rubber is a mixture of substances that can precipitate and cause yellowing. The term "rubber" is called frost"

Q:What is the temperature of ordinary silicone rubber resistant to low temperature?

Heat resistance of silicone rubber in the air is much better than that of organic rubber, at 150 DEG C, the physical and mechanical properties basically unchanged, semi permanent use, under the temperature of 200 DEG C can be used continuously for more than 10000h; 380 DEG C can be used for some time. Silicone rubber is therefore widely used as rubber parts in high temperature applications.

Q:What about the smell of smoked rubber products?

The curing agent and accelerator taste, rubber itself is tasteless, sulfur curing agent debris less is better, if no sulfur, with peroxide. Oil will also produce a flavor, rubber Odor Remover can be removed, in fact, that is, some spices, oh!Now there is a special rubber deodorant in the market, you may as well try.Can buy some activated carbon in the box, the cost is not high, but also long lasting odor.

Q:Half finished rubber film surface white is going on

Rubber is a latex made from rubber, tree, rubber, and grass. It is made of flexible, insulating, impermeable and air. High elastic polymer compound. It is divided into two kinds: natural rubber and synthetic rubber. Natural rubber is made from rubber, tree, rubber, grass and other plants. The synthetic rubber is obtained by polymerization of various monomers. Rubber products are widely used in industry or in all fields of life.

Q:Why is natural rubber a strategic material?

Standard rubber: standard rubber is mainly divided into 5 glue, No. 10 glue and No. 20 glue. Glue No. 5 is the first grade glue. It is the best glue. Its impurity is 0.05%; No. 10 glue is two grade glue, its impurity is 0.10%, 20 glue is three glue, and its impurity is 0.20%. Glue uses different models are not the same: No. 5 commonly used to make rubber tyres; No. 10 and No. 20 rubber glue for making tire.Smoke film: the natural film pressure to the water were smoked after baking film by burning the coconut shell by smoke and heat. The purpose of fumigation is to make the film dry and inject anti oxidation and antiseptic cresol substances. Natural rubber is the primary form of smoke film.Concentrated adhesive: it can be used as bonding material.

Q:What does rubber mean?

Rubber is derived from latex of rubber trees, rubber plants, etc. it is made of elastic, insulating, impermeable and air.

Q:Is the odour emitted by industrial rubber poisonous?

Rubber production process including plastic, mixing, rolling or extrusion, molding and vulcanizing and other basic processes, each process for the products have different requirements, respectively, with a number of auxiliary operations.