||3mm, 4mm, 5mm
||0.30mm, 0.35mm, 0.50mm
||ISO9001, 14001, SGS, CE, Kynar500
||Silver, Red, White, Any Color Is Available
||PVDF(External Wall), PE(Internal Decoration)
||15 to 20 years
ACP Aluminium Composite Panel For Outdoor Decoration
|Name||ACP Aluminium Composite Panel For Outdoor Decoration|
|PVDF||4*0.4mm||Most Popular In The World For Outdoor Decoration|
|4*0.5mm||Best For Outdoor Decoration In General|
|4*0.3mm||Economy Also Meet Requirement For Outdoor Decoration|
|3*0.3mm||Popular For Indoor Decoration In Commercial Building|
|4*0.5mm||Superior Fireproof Performance On The Basis Of The Best Specification|
|PE||3*0.3mm||Most Popular In The World For Indoor Decoration|
|3*0.21mm||Economy For Indoor Decoration In General|
1) Top Coating Polyester
2) Aluminum skin
3) Macromolecular lamination film
4) Nontoxic polyethylene core or No-combustible filled core
5) Macromolecular lamination film
6) Aluminum skin
7) Service coating or mill finished
|Characteristic||Detailed explanation for each point|
|More color options||IDEABOND polyester coating ACP is with extremely vivid & offering thousands color options.|
|Smooth Surface||IDEABOND Polyester Aluminium Composite Panel provides superior and smooth surface, satisfying the modern building with perfect appearance.|
|High Strength||IDEABOND Polyester Aluminium Composite Panel with the high quality polyethylene core which can be greatly enhanced strength ensures the performance of wind-pressure resistance, shockproof, and anti-impact.|
|Easy Processing||ACP is easy to cut, slot, punch, bend into circular, rectangular and other shapes also can be designed to various modeling according to your ideas.|
|Environmentally Friendly||IDEABOND PE ACP is green building decorative material; Can be easily processed and installed; Light weight, good strength and flexibility|
|Economic||IDEABOND PE ACP is more economic than many other materials like ceramic, aluminium single panel, or real stone etc.|
|Dimensional Tolerances||Thickness(mm)||± 0.2|
|Thermal Expansion||2.4mm/m at 100 º C temp difference|
|Aluminum Thickness(mm)|| ± 0.02|
|Surface Properties||Pencil Hardness||> HB/> 2H|
|Temperature Resistance|| -50 º C to +80 º C|
|Impact strength (kg. cm)||50|
|Boiling Resistance||Boiling for 2 hours without change|
|Acid Resistance||Immerse Surface in 2% HC1 for 48 hours without change|
|Alkali Resistance||Immerse Surface in 2% NAOH for 48 hours without change|
|Oil Resistance||Immerse Surface in 20# engine oil for 48 hours without change|
|Solvent Resistance||Cleaned 100 times with dimethylbezene without change|
|Cleaning Resistance||Over 1000 times without change|
|Peel Strength 180 º C||180oC> 5 newton/mm|
|Product Properties||Sound Absorption NRC||0.05|
|Sound Attenuation RW db||23/24/25|
|Water Absorption % by volume||0.0047/0.0057/0.0012|
|Core Composition||LDPE Polyethylene, Non- Combustible Material|
1) Building exterior curtain walls
2) Decoration and renovation additions for old buildings
3) Decoration of interior walls, ceilings, bathrooms, kitchens and balconies
4) Shop door decoration
5) Advertisement board display platforms and signboards
6) Wallboards and ceilings for tunnels
7) Industrial materials and materials for vehicles and boats
Q: Can you provide free samples?
A: Yes, free samples will be sent to you on freight at destination.
Q: Can I get your latest catalogue?
A: Yes, it will be sent to you in no time.
Q: What is the MOQ?
A: 5 tons
Q: What are your payment terms?
A: We accept L/C, D/A, D/P, T/T, West Union, etc
- Q:Aluminum-plastic curtain wall construction in winter, with the real paste can you?
- Since it is aluminum-plastic curtain wall construction, then in accordance with the relevant requirements, should be used dry hanging practice,
- Q:Fluorocarbon aluminum plate prices how much
- After the chemical treatment and the application of high-tech film, so that the adhesion between the paint and aluminum-plastic plate uniform, color and diverse, so that the choice of space larger, filling the user's personalized. Fluorocarbon coating technology in the application of aluminum-plastic composite panels, so that the aluminum-plastic plate in the colorful color, color retention in 15 years does not change color. Because fluorocarbon resin has excellent anti-fade, anti-frost, anti-atmospheric pollution (such as acid rain, etc.) aggressive, anti-ultraviolet ability, crack resistance and resistance to harsh climate and environmental capacity, is conventional paint can not be compared, So fluorocarbon coating technology and organic combination of aluminum-plastic plate, to the construction industry to provide a new type of decorative materials. In today's society, economic development and the concept of continuous improvement, developers of their own business image is more and more attention, and this is also a large area to promote the fluorocarbon aluminum
- Q:What kind of material is made of aluminum-plastic plate?
- Material Aluminum: curtain wall board with material properties should be consistent with GB / T3880.2 requirements of the 3 × × × series, 5 × × × series or better corrosion resistance and mechanical properties of other series of aluminum alloy. Aluminum should be cleaned and chemically pretreated to remove oil, dirt and loose layers of natural formation from contact with air and form a layer of chemical conversion film to facilitate aluminum and coating and Solid bonding of the core layer. Coating: curtain wall coating material should be used weatherability excellent fluorocarbon resin, can also use other performance quite or more excellent material. Note 1: Polyvinylidene fluoride fluorocarbon resin (PVDF), which is excellent in weatherability, is widely used. However, pure PVDF resin should not be directly coated on aluminum, and some other materials should be added as appropriate to change its coating Performance, which constitutes the so-called 70% fluorocarbon resin. Note 2: 70% fluorocarbon resin, refers to the production of aluminum-plastic plate coating used in a variety of raw materials, PVDF resin raw materials accounted for 70%. As the paint is also a pigment and other components and fluorocarbon resin coating is usually a layer of non-fluorocarbon resin primer, so the total thickness of PVDF in the total coating of aluminum-plastic plate is about 25% to 45%. Core material: Ordinary curtain wall board material used in the material properties should be consistent with GB11115, GB11116, GB / T15182 or other corresponding national or industry standards.
- Q:What is the difference between aluminum and aluminum curtain wall aluminum veneer? That cost is high!
- Composite aluminum is also known as aluminum composite panels,
- Q:Will the aluminum plate and aluminum plate and plastic plate what is the difference ah?
- Aluminum-plastic plate is mainly plastic sheet, aluminum plate is aluminum is a square, plastic plate with less place, as long as the finished product
- Q:Aluminum-plastic panel finishes how to make aluminum-plastic plate paste more firmly hold?
- I am not a master of engineering I do not know slightly
- Q:Is there a kind of wall called aluminum?
- The plate is slightly thicker than the fire board, the surface is a thin layer of aluminum, the bottom is synthetic yarn.
- Q:Why aluminum-plastic composite board in the cutting of the inner aluminum and polyethylene plastic?
- First want to say, this value or that the thickness is not expressly defined, is not easy to control.
- Q:Custom aluminum-plastic plate head signs how much money 1 square meter?
- The span is relatively large, aluminum-clad board package package material, the second of more than 200 there, but with a period of time to find the problem, good some eight hundred and nine to one thousand three four range, the general banking class are about 40s To 50s, note that I said that the foot is more than 40s, not the standard 40 actual 20s are not like the goods, and now the market a lot of substandard products, remember to look at the thickness of the caliper, more than the overall thickness, but also Look at the thickness of the aluminum layer. The latter number of feet, the use of flatness better, but the only point is still can not avoid the seams, in fact, eight hundred to one thousand or so the price, the last year we choose aluminum-and-plastic board more and more Less, the same price, of course, buy the installation more quickly, the surface joints are not seamless doors will be better, the most important thing is that there is no need for frequent cleaning, there are dust-proof seamless door, recommended preferred.
- Q:Color plate and aluminum plate
- Aluminum-plastic panels are generally only suitable for exterior decoration and wall decoration, color steel plate with sandwich, one is the foam of the mezzanine, a glass of rock wool, suitable for simple rooms, purification workshop, partition, etc., noise Hot, sealed effect is good, you do room decoration I suggest you use color plate, the price is of course high color plate.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range