200W Solar Power Panel Designed by China Factory
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 watt
- Supply Capability:
- 1000 watt/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
product description
The resistivity, mobility, and free-carrier concentration in monocrystalline silicon vary with doping concentration of the single crystal silicon. Whereas the doping of polycrystalline silicon does have an effect on the resistivity, mobility, and free-carrier concentration, these properties strongly depend on the polycrystalline grain size, which is a physical parameter that the material scientist can manipulate.[20]Through the methods of crystallization to form polycrystalline silicon, an engineer can control the size of the polycrystalline grains which will vary the physical properties of the material.
Base stations - for mobil and internet provider
Military and Paramilitary base stations
United Nations and other Humanitarian Aid & Relief Agencies
Mining Contractors (exploration/drilling)
Emergency Services (Natural Disaster Organisations)
Road, Bridge, Pipeline Construction Organisations
product characteristic
The E-series photovoltaic module comes with a 90% (12-year) and 80% (25-year) of rated minimum peak power warranty and a 10-year warranty on workmanship and materials
Positive power tolerance 0 to +5W
10 year product workmanship warranty
Upto 25 year linear power warranty of minimum peak power
Proven eld performance worldwide
Internal by-pass diodes across 20 series cells resists effects of shading
Passed 3rd party testing: Salt spray and Ammonia resistance
Conforms to UL 1703, ULC-ORD-C1703-01 and CE
detail parameter
technological process
package&delivery
we pack goods with pallets and carton box
each one will be carefully examined by our staff.
- Q:I have thermal solar panels on my roof. Iive in Colorado
- Mr. Sun when he finds out what the **** exactly is going on.
- Q:What would it take to make a heater for a small solar panel. I am looking into making a heater for a livestock tank to keep ice melted. I know that heaters take alot of energy to run, but my theory is that if heated mirrors on a car can melt ice with low voltage and im sure not extreme heat (40-60 degrees) then making a heater with just high enough temperature to keep from icing over and melting ice is possible. Where do I start? I would like to use an inexpensive solar panel that will generate enough heat to keep ice from forming and melt it at the beginning of the day. How can you make such a heater and apply Ohms law so that it will function correctly, what Wattage will the pannel need to produce to generate enough heat for the heater. The device will only have to be large enough to melt a spot large enough for an animal to drink.
- Short answer is yes. Good to start out a large tank, or big rock to mount your collectors on. Something the stock won't eat or push over. I would start with a swimming pool solar collector. It is just a big piece of black plastic aimed at the winter sun. A collector with insulation and covers will give more heat per sq foot and cost more. Big mirrors and a black painted stock tank might be enough. Insulation of the tank might help a lot. Is the water liquid when pumped up the tank? Do you truck the water in? Is there any electric power wired there or near by? Electric solar collectors can pump and heat water and charge batteries, but it is also possible to circulate water using a thermosyphon set up. You don't have to use photocells. If it gets cold enough some collectors can freeze solid and damage themselves. There are collectors that contain two loops one water the other antifreeze.
- Q:I am fairly new to the solar panel scene, and am eager to try to set one up myself instead of buying a kit. I am looking for a solar panel that puts out 00 Watts or more, and can produce more than 20 volts. Thanks
- Build okorder /
- Q:Is there a cheaper way on how to make your own solar panels ? Can someone share their real life experience ? Thank you.
- It used to be possible to get broken solar cells for free from solar cell and solar panel manufacturers and then it's just a matter of labouriously measuring the voltage and current characteristics of each fragment and soldering them in a combination of parallel and in series to get a crude solar panel with the desired output but the manufacturers have caught on and now sell the broken fragments by the pound so it's not really a cheap solar panel anymore but it's still very labor intensive and results in a fragile solar panel that is readily damaged and quickly degrades. Not really worth the trouble any more.
- Q:How do solar panels affect the roof warranty?
- Solar panels generally do not void a roof warranty, but they may have some impact on it. The installation process of solar panels involves drilling holes in the roof, which can potentially cause leaks if not done properly. Therefore, it is important to hire a reputable installer who is experienced in working with solar panels and understands the intricacies of a roof. Some roofing manufacturers may require specific mounting systems to be used, and failure to comply with these requirements may void the warranty. It is advisable to consult with both the solar installer and the roofing manufacturer to understand any potential impact on the roof warranty before installing solar panels.
- Q:I need help?!!
- It needs some battery banks in order to store the energy that will be useful during nighttime if less energy is stored in the batteries due to poor weather condition the effectivity of it is minimized. It has some limitations like you need more batteries in parralell to store more energy from solar cells, and it needs to be fully recharge the next day after it is discharged at night.
- Q:Please, I want a good definition. :DD
- Solar panel is a battery of solar cells. Solar cell is a device which uses the sun's rays to produce electricity by the photovoltaic effect. The photovoltaic effect involves the creation of a voltage (or a corresponding electric current) in a material upon exposure to electromagnetic radiation. It utilizes the generation of a voltage when radiant energy falls on the boundary between dissimilar substances (as two different semiconductors).
- Q:How do solar panels impact the electricity bill?
- Solar panels can significantly reduce or even eliminate electricity bills by generating clean and renewable energy from the sun. By harnessing solar power, homeowners can offset their electricity usage with the electricity produced by the panels, resulting in lower overall energy costs.
- Q:Why are they placed there? How come they aren't placed on the floor or window.My fiance and I are interested in putting solar panels on our new home. I was really curious and google wasn't giving me the answer. My roof is pretty small in our new house and I don't think it would fit there. Why is it usually placed there and is there another place? You will be chosen as best answer if you answer all my questions. Thanks in advance, and I would appreciate if nobody is rude. Otherwise, I will have to report abuse.
- The roof is the most popular location for panels, I'd imagine because: ) The space is not otherwise being used. Panels in the yard would take up play space, or shade the garden or lawn. 2) The roof is usually more free from shadows because it's high up. Something low to the ground could more easily be shaded by trees, fences, or nearby buildings. 3) The roof often has a built-in tilt that is more ideal for panels. Take a good look at your roof, especially if there is a south-facing side. The roof could be bigger than you think. Only 0% of our roof area is dedicated to solar panels, and that keeps up with our yearly electrical usage.
- Q:I am completely ignorant on this subject. I was just wondering out of curiosity of how many solar panels and equipment that it would take to run a central ac for a 2500 sq ft home and a pump for a medium sized pool. I'm talking running ac for like 8 hours a day to keep around 65-70 degrees and running the pump 24/7. Just looking for a general ballpark answer.
- Solar panels are not going to be able to run a pool pump 24/7. They will only produce their rated electricity for 4 to 8 hours a day. For the balance you will need a grid connection or a battery backup. Running the AC would require different power levels depending upon humidity, outside temperature levels, solar gain for the house, and insulation levels. An underground house in Maine will be much easier to AC than a Glass house in Arizona. First find the power requirements. If you had the existing equipment they will have a label with the power requirements or the minimum breaker required if nothing else. For example the pool pump may require a 0 amp 240 breaker while the AC may require a 30 amp 240 breaker. That would be 2400 watts for the pump and (30 x 240) 7200 watts for the AC or a total of 9.6kW each hour of operation. (max) You will next need to find the rated capacity of the solar panels. If each panel were rated at 300 watts then you would need 32 panels for the daytime use and perhaps more to fill in a battery backup. All the numbers are very rough estimates.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
200W Solar Power Panel Designed by China Factory
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 watt
- Supply Capability:
- 1000 watt/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products