Street Light Maintenance

Hot Products

FAQ

Is the energy-saving lamp a fluorescent lamp?
Yes, the energy saving lamp is called compact fluorescent lamp. I hope it will be a happy holiday!
Are there any differences between fluorescent lamps and energy-saving lamps? What are the differences between them?
When the lamp is energized, the tungsten electrode is discharged between the two ends of the lamp. Light emitting from short wave radiation into visible light mainly by phosphor. Rare earth three primary fluorescent lamps, which contain yttrium, europium and terbium rare earth phosphors, emit brighter light and are closer to the solar spectrum than standard fluorescent lamps. At the same time, the light can save 50% energy consumption, and the three primary color phosphor powder is mixed by three kinds of phosphor powder of three narrow band red emitting (611nm), green (545nm) and blue (450nm) color spectrum.
Why can fluorescent lamps emit various colors?
Phosphor of red, green and blue three colors, yttrium oxide (red light, peak wavelength 611nm), magnesium aluminate (emitting green light),The peak wavelength is 541nm) and the barium magnesium aluminate (blue light, with a peak wavelength of 450nm) mixed in a certain proportion can be obtainedFluorescent powder of any color can be sent out
How to adjust light in fluorescent lamp
Tolerable。 Dimming is mainly the frequency modulation, generally from 10-100%, but must take into account the small power when the filament emitting insufficient electronic problems. Electronic dimming ballast for fluorescent lamp is a molded product. ORSAM has.LUTRON fluorescent lamp, dimming module and dimming ballast are easy to use.
Maintenance and repair of fluorescent lamp
Pay attention to maintaining a ventilation environment, not only to take away the dust, but also to reduce the temperature of the tube so as to extend the life of the tube. 1, the fluorescent lamp heating easy to attract dust, clean and ready to turn off the power, and then try to make the indoor air circulation, with a twist dry cloth stained with a little cleaner to clean the tube gently, and then use a clean dry cloth to clean the cleaning agent.
What's the difference between an energy-saving fluorescent lamp and a LED light?
When the two semiconductors are connected, a P-N junction is formed between them.When the current passes through the wire acting on the wafer, the electrons are pushed into the P region and combined with the electron hole in the P region,Then energy is emitted in the form of photons, that is, light.
What are the types of fluorescent lamps?
Straight tube fluorescent lamp. This fluorescent lamp belongs to double end fluorescent lamp. The common nominal power is 4W, 6W,8W, 12W, 15W, 20W, 30W, 36W, 40W, 65W, 80W, 85W and 125W. by T5 T8, T10 diameter, G5 G13.T5, T12. lamp, >30 color index, good color, lighting effects, ideal for environmental goods and rich colors of the decline of small, long service life, the average life expectancy of 10000 hours. Suitable for clothing, department stores, supermarkets, food, fruit, and other colorful pictures, display window use.T8 color, brightness, energy saving, life is good, suitable for hotels, offices, shops, hospitals, libraries and family but requires simple color high brightness occasions.In order to facilitate installation, cost reduction and safety, many ballasts for straight fluorescent lamps are mounted in brackets to form self ballasted fluorescent lamps
What is a fluorescent lamp? What are fluorescent lights?
The traditional fluorescent lamp type fluorescent lamp and electrodeless fluorescent lamp, traditional fluorescent lamp is a low pressure mercury lamp, mercury vapor is the use of low pressure in the discharge process of ultraviolet radiation, so that the phosphors emit visible light emitting principle, so it belongs to low pressure arc discharge light source. The traditional fluorescent lamp is equipped with two filaments. The filament is coated with electronic emission materials, three yuan carbonate (barium carbonate, strontium carbonate and calcium carbonate), commonly known as electronic powder. The alternating filament acts as a cathode and anode under alternating voltage. The inner wall of the lamp tube is coated with phosphor powder. The tubes are filled with argon at 400Pa-500Pa pressure and a small amount of mercury. After discharge, the liquid mercury evaporates into mercury vapor at a pressure of 0.8 Pa. In the electric field, the mercury atoms continuously from the original state is excited into the excited state, then spontaneous transitions to the ground state, and the radiation wavelength of 253.7nm and 185nm (the peak value of ultraviolet wavelength is 253.7nm, total radiation energy 70-80%; peak wavelength is 185nm, accounting for about 10% of the total radiant energy), to the release of excess energy. The fluorescent powder absorbs ultraviolet radiation and emits visible light. Fluorescent powder is different, the light is also different, that is, fluorescent lamps can be made white and various colors reasons.