Ceiling Max Grid System

Hot Products

Ceiling T Grid System for Suspended Ceiling

Galvanized Suspension Ceiling Tee Grid for Ceiling

Black suspended ceiling grid ceiling system

Suspended ceiling grids drop ceiling grid prices

Suspension Ceiling Tee Grid for Acoustic Ceiling

Plain Ceiling T Grid Flat Ceiling System T15 T24 Ceiling Grid

Groove Ceiling T Grid Exposed Ceiling System

Suspension Ceiling Tee Grid-Ceiling System

Suspension Ceiling Tee Grid -Plane Tee Grid

Black and White Color Ceiling Grid Suspended Ceiling Accessory

FAQ

I live in an addition to a older house (40 years or more old) in a college town. i live under a three season porch and i have a drop ceiling (with ceiling tiles in a metal grid) The squirrels are constanting running around on the drop ceiling and waking me up and just making a ton of noise. What can i do to deterr them? Ive already tried mouse traps and these Riddexx things u plug into the wall that are supposed to use the electrical wiring to deterr mice, insects and rodents from being around, but they're still here. Yes ive talked to my landlord and they dont seem to care, i only have 4 months left to live in this S*** hole, i just want something that will keep them away. (whatever it may be, please dont let it stink up my room)

Throw Moth Balls up there in each corner after opening then slightly. Hint: I also throw then UNDER my house to keep ants, roaches, mice and other critters away. I live in the country. We have possums, skunks, etc, but no problem now!Probably won't even smell them if thrown to the corners.

Interior decoration light steel keel ceiling in the main keel, vice keel spacing according to the specification should be how much?

The main keel spacing is 1000mm, the distance between the keel is 400mm.

There is heating the ground, the above to add light steel keel wall how to deal with?

First find out the ground to the laying of the warm tube, it is best to get to warm the construction drawings and then according to the marked on the map, looking away from the far away to cross the line to see and design the wall is likely to be compatible, and then play Bolt, install the keel. Estimated not easy to get, to be very careful, before the construction of the warm door off, the water vent and then get.

What is the distance between the main keel? How much is the distance between the keel? What is the spacing of the hanging bars?

According to the "building decoration construction specifications" provides: the main keel spacing 800 ~ 1200mm, vice keel spacing of not more than 600mm (generally determined by the width of the plate), hanging spacing 900 ~ 1200mm (generally set a hanging point per square).

With gypsum board and light steel keel do partition wall, how much money a square meter?

Do not contain ash, the general decoration companies are about 95 per square meter.

Light steel keel ceiling when to add crossed keel

Two gypsum boards overlap with keel

There is a ceiling of light steel keel partition to be how high, whether only need to do ceiling elevation, or to be higher than 20cm, or do the top plate bottom ~

According to the normal process, it should be done first to do the ceiling wall.

How hard is it to remove a hung ceiling?

It wasn't that hard. We removed the tiles, which were attached, not the drop in tile type, then we had to remove the grid, however we didn't have to be as careful as you may have to be, we suspected we'd have to gut the ceiling anyway. But PEB is right, you may not like what's underneath. We had the drop ceiling attached to an old plaster and lath ceiling, which we removed and down came a ton of grimey blown in insulation. But we like our 9 foot ceilings, now done in sheetrock, so much better. Good Luck!