Zirconia ceramic foam filter for stainless steel

Ref Price:
Loading Port:
China Main Port
Payment Terms:
TT OR LC
Min Order Qty:
-
Supply Capability:
-

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

Zirconia ceramic foam filter


Application:For the filtration of molten steel and alloy,large scale iron casting
Product standard:China national GB/T 25139-2010
Zirconia ceramic foam filters are determined for filtering of steel and steel alloys up to the temperature of 1700 °C.
Filters are recommended especially for high quality grades of alloys.
-Drop turbulent of molten steel and alloy
-Improve accepted rate of steel casting
-Reduce foreign matter of steel casting
-Drop twice oxide flaw
-Reduce second-face flaw after machine process
PHYSICAL PROPERTY:
Main material:ZrO2
Applied Temperature:≤1700℃
Color:Yellow
Hole density (PPI):10/20PPI(PPI=pores per inch)
Porosity(%):80-87
Bending strength(Mpa):≥1.0
Compressive Strength(MPa):≥1.75
Bulk Density(g/cm3):0.7-0.85
DIMENSIONS:
Length*width*height=(40-100)*(40-100)*(20-35)mm
With round,square and rectangle shape.
Size tolerance:±1mm
Pore size: 10/20PPI          
PPI tolerance:±2PPI
CHEMICAL COMPOSITION:
Al2O3 MgOSiO2 Fe2O3 ZrO2
≤1.8% ≥3.0% ≤0.5% ≤0.1% ≥94.00%
APPEARANCE REQUIREMENTS:
-No cracking allowed across the full length of the edge
-Any fine cracks within the filter matrix may not be through-going
-Filters should be free from loose debris


Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Ceramic filter capacity.
You ask too general, to say processing capacity (ie capacity), at least to provide material conditions, such as: material name, concentration, particle size distribution. In addition, the basic conditions of equipment operation should be taken into account.
Q:Does the ceramic factory use hydrochloric acid?
In order to avoid the possibility of plugging, ceramic filter plates with suitable aperture range of different manufacturers can be selected.
Q:What is the reason that ceramic filter does not absorb mineral powder?
In order to avoid frequent fluctuations in pressure and pressure within a short period of time, a buffer cylinder with a stabilizing effect is provided in the backwash pipe.
Q:What is the working pressure of the ceramic filter?
The backwash pressure is the size of the backwash of the ceramic filter during recoil stage, and the recoil pressure is generally less than 0.12MPa. The greater the pressure, the better the recoil effect, the better the service life and the suction effect of the ceramic filter plate, and the worse the service life and the suction effect of the ceramic filter board. The backwash pressure of the ceramic filter shall be no less than 0.07MPa.
Q:What is the reason that the ceramic filter does not absorb mineral powder?
The recoil pressure is regulated by the pump loop valve and the pressure regulating valve. In order to avoid frequent fluctuations in pressure and pressure within a short period of time, a buffer cylinder with a stabilizing effect is provided in the backwash pipe.
Q:What's the reason for high water content in filtration copper concentrate?
Ceramic filter plate1) the service life of the ceramic filter plate has arrived.2), ceramic filter plate uneven in quality on the market, the production capacity of some ceramic products difference (table mask size is too large or pore size uniformity is poor as a result of suction effect is poor, short life), but the price is low, but some users in order to reduce the operation cost of ceramic machine, tend to choose low price the ceramic plate, sometimes a ceramic machine ceramic filter plate with several may be different, so do not get the expected effect in normal use.In addition, the concentrator slurry, especially metal slurry, is very powerful on the wear of ceramic filter plate, the mechanical strength and wear resistance of ceramic filter plate requirements (corundum has high mechanical strength, good abrasion resistance, especially suitable for metal slurry dehydration).When selecting ceramic filter boards, these two points should be taken as a reference.
Q:What is the filtration accuracy of 50nm ceramic membrane?
The filtration accuracy is the maximum particle size that the membrane can pass through.
Q:Why should filter core be used in backwash of ceramic filter?
The filter in the water filter of ceramic filter is used for filtering water.
Q:Ceramic filter in vacuum pressure enough, the ceramic plate does not suck pulp, what is the reason for analysis?
The incoming mud content, fine particle size, pulp itself is not suitable for the use of ceramic filter dehydration, if the use of ceramic filter dehydration in this case, will accelerate the blockage of ceramic filter plate, blocking the situation after the second reference description.
Q:The use of water glass as beneficiation agent, copper concentrate in the ceramic filter can not filter, how to do?
Water glass is a kind of adhesive of flotation reagent, after use may cause the pulp viscosity increased, leading to the adsorption resistance of slurry becomes large, when using ceramic filter filtration dewatering, vacuum suction surface of the microporous ceramic filter plate is smaller than the resistance, there may be a suction effect or even not suction. Some flocculant agents can lead to this phenomenon.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range