XLPE Insulated Power Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
XLPE Insulated Power Cable
XLPE cable constitutes the best cable for transmission and distribution lines because of its excellent electrical and physical properties. The excellent resistance to thermal deformation and the excellent aging property of XLPE cable permit it to carry large current under normal(90℃), emergency(130℃) or short circuit(250℃) conditions.
XLPE cable withstands smaller radius bending and is lighter in weight, allowing for easy and reliable installation. Furthermore, the splicing and terminating methods for XLPE cable are simpler in comparison with other kinds of cables.
XLPE cables can be installed anywhere without special consideration of the route profile (height limitations) since it does not contain oil and thus is free from failures due to oil migration in oil-filled cables. XLPE cable does not generally demand a metallic sheath. Thus it is free from the failures peculiar to metallic-sheathed cables, such as corrosion and fatigue.
Standard: GB12706.3-91
Using range
This product is for rated voltage (U0 / U) 0.6/1-26/35 kv power line transmission and distribution
Characteristics
1. The highest rated temperature of the cable conductor is 90 ° C, the short circuit (the longest duration of no more than 5 s), highest temperature of the cable conductor does not exceed 250 ° C.
2.The ambient temperature should not be less than 0 ° C when laying cables.
3.Allowed bending radius of laying: single-core cable is not less than 15 times the cable diameter; multi-core cable is not less than 10 times the cable diameter.
Application
YJV YJLV
Copper (aluminum) core cross-linked polyethylene laying indoors, channels and tubes, but also buried in the loose insulation of PVC sheathed power cable soil, can not afford external force
YJV22 YJLV22
Copper (aluminum) core cross-linked polyethylene laying in the ground, can withstand the role of mechanical force, but unable to bear PVC insulation tape armored PVC sheathed power cable large pulling force.
Introduction of our company
Our company is a professional China Wire and Cable Manufacturers, mainly supply Aerial bundled cable,House Electric Wire, Insulated Overhead Cable,Aluminium Conductor Steel Reinforced, PVC Control Cables,XLPE Power Cables,BV Electric Wires,Nylon Sheathed Cable,Buried Cable,High Voltage Cable,House Electric Wire,Single Core Flexible Copper Cable,Civil Wire And Cable etc. series of wire and cable products, sincerely welcome everyone to visit.
- Q:When the cable is plugged in the light is yellow like usual but when I plug it into the Xbox it goes red and I can't turn on my Xbox. I can use the cable for my other Xbox and the light turns green, but that one already has the red ring. PLZ HELP!! I JUST DOWNLOADED THE HALO REACH BETA! AND I'M BOREDand please dont just say halo sucks.
- switch power supply and see if that works if not somethings wrong with your system and halo does suck thats only game that xbox has that is good and thats pretty sorry
- Q:How should connectors for storage device cables and connectors for power supply be described?
- well the storage device cables are called SCSI (Small Computers System Interface) and those power cables don have any special names,,, The power output from smps comprises of four wires.. +12v -12v +5v and -5v
- Q:How high voltage armored power cable is grounded
- When the armor leads directly to ground to buy the cable terminal, the manual has a specific production process
- Q:my elite was banned from xbox live, yes my fault, so i ordered a new xbox 360 elite just the xbox part and kept everything else. But it has came today my new one but my original elite power cable will not fit into this new elite i have. any reason why? will a cable for the original white xbox work for my new elite?
- It depends on what chip set they have. An older Elite 360's power cable (with the older set) will fit into a new one, but not the other way around. It sounds like the one you just bought is older than the one that was banned.
- Q:Hello,I recently bought a kotatsu and I really need some help. The power cable is of course Japanese... And I need some type of converter.On the part of the cable that plugs into the radiotaor it says:PSE (It's in some square box)JET MR7A 250VOn the end that plugs into the wall it says:PSE (It's in some square box)JET MR7A 125VI''m not sure if a simple small converter to let me put the Japanese cable into my wall is enough, I think I need something extra to make sure nothing goes into flames.Inside the Japanese instruction manual I found some info ... However, I'm not really sure if it is related to the power supply or not...AC100V 50-60Hz400W3.1 (Probably the length of the cable) 1.3 (Same here I think)140Wh 60 Wh55C 37CPlease help me, what should I get to be able to use the cable in Europe. Any links at all will be helpful...Thanks.
- Don't worry too much about what the cord says. Worry about the power requirements on the appliance label, and making sure you are feeding it with the voltage required, with a capacity within the range. In your instance, you will need a converter transformer that converts your outlet voltage to 100V, and has 550 or larger watt capacity.
- Q:I recently bought a 750watt power inverter and there are two small cables to connect to it that look like small jumper cables. Can i connect my regular (longer/bigger) jumper cables to the car battery and connect the other end to the inverter cables??Ive been told that this will blow the inverter, and i've been told otherwise. Please let me know if you've had any experience doing this.Thanks,
- That's fine for a temporary use situation. However, if you are going to be using this regularly in the same vehicle, I would recommend a more permanent installation using 4 ga power wire directly to the positive terminal of the battery. Make sure you install a fuse on that wire as close to the battery as possible. If the jumper cables are cheap and thin, or the contacts are coroded or not making good contact, this can cause the voltage to drop to your inverter and cause it to draw more current and possibly fry the power supply.
- Q:I'm trying to install my radeon x800 xl graphics card into my dell inspiron 531 desktop. After inserting the card in the pci-e slot, and connecting the monitor cord to the card, I thought everything would work fine. I booted the computer and I got the error quot;You have not connected the power cable to your video cardquot;What do I need to do? This is an older video card, and I may have lost this supposed power cable. I'm lost with this and my computer won't even boot now. Any help is much appreciated. I'm willing to buy this power cord if i need to.
- In okorder /... EDIT The adapter would connect to any two unused 4 pin molex connectors coming from the power supply, it doesn't connect to the motherboard.
- Q:Does anyone with an Xbox 360 or someone that knows stuff about AC power cords tell me if the Belkin Standard Power Cable can be used with the xbox 360?Best answer gets 5.
- Yep its the same thing as the 1 that came with the Xbox 360 but not made by Microsoft. Only problem is you'll still need the power block that came with the xbox 360.
- Q:Many of the complete amplifier kits, example rated for a 700 watt amplifier come with a 10 gauge power cable. Many of the gauge charts from the online car audio techs, would recommend a 4 gauge wire, but they sell the amp kits with the 10 gauge. I guess bigger is better, more efficient and safer for the installation, but I would expect them to add some * adjacent to the kit specs with their recommendation.
- Well in this case bigger is most of the time better. I used a 2 gauge for both of my amps. 2 guage is thick enough to handle alot of juice! And your right, 10 guage isnt always the best size for bigger amps. I assume you are talking about a big amp right? My 2 amps, one put out 1600 rms, and my amp for the high's put out 200 rms. And both of these amps ran off of the same power cable with no problems ever. Now if you are going to be running a big amp or amps, dont forget to also help out your cars alternator by also running a DEEP CYCLE battery, and also a recomended 3 farod capasitor! Good luck!!
- Q:I bought one on OKorder and thought it was just a regular outlet power extension but it's not.. what is it used for? 10 points
- It is used to either extend a power inlet cable (usually an IEC type), or connect the power outlet on a device to the power inlet on a device, where they use IEC connectors.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
XLPE Insulated Power Cable with a good price
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
