Woodworking Band Saw Machine with Wood Vertical Saws
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Band Saw Machine
Main Structure Of The Machine:
This machine from the body, working platforms, the upper and lower saw wheel body, the upper and lower saw card device such as security cover and transmission parts.
Use of the machine:
This machine is mainly used for wood vertical saws, horizontal saw all kinds of Square-edged Timber and plates, also applies to non-metal-like plastic, nylon sawing.It is suitable for all kinds of wood processing plants, such as furniture factories, board box factory, wood thread factory, wood-mode manufacturing and construction technology, etc.
Main Specification And Technology Parameter:(Normal Type)
Model | MJ345/MJ346 | MJ316A/MJ316D | MJ318/MJ319 |
Saw wheel Dia. | 500mm/600mm | 610mm/620mm | 800mm/900mm |
Width of sawing woof | 450mm | 400mm/350mm | 350/400mm |
Height of sawing wood | 150mm | 300mm/350mm | 400/600mm |
Cutting speed of saw band | 20m/sec | 21.3m/sec 27m/sec | 30.14m/sec 34m/sec |
Rotary speed of saw wheel | 780r/min | 680r/min 830r/min | 720r/min |
Adjustable angle of worktable(LXW) | 0-45degree | ||
Max size of worktable( | 540X570mm | 780X700mm/840X750mm | 800X750mm/830X780mm |
Motor power/Voltage frequency | 2.2kw(3HP) / 380V 50Hz | 4kw/7.5kw(5.5/10HP) / 380V 50Hz | 11kw(15HP) / 380V 50Hz |
Weight of machine | 300kg/850kg | 850kg | 980kg/1100kg |
Overall dimensions | 860X700X1900mm | 1600X1200X2050mm | 1700X1350X2350mm/ 1750X1400X2750mm |
Main Specification And Technology Parameter:(With sliding table type)
Model | MJ316DT | MJ318T | MJ319T |
Size of sliding table(LXW) | 2800X377mm | 3200X367mm | 3200X367mm |
Saw wheel Dia. | 620mm | 800mm | 900mm |
Max processing length | 2600mm | 3000mm | 3000mm |
Width of sawing woof | 350mm | 400mm | 400mm |
Height of sawing wood | 350mm | 600mm | 600mm |
Cutting speed of saw band | 27m/sec | 34m/sec | 34m/sec |
Rotary speed of saw wheel | 830r/min | 720r/min | 720r/min |
Max size of fixed worktable | 830X350mm | 790X380mm | 790X380mm |
Motor power/Voltage frequency | 7.5kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz | 11kw(10HP) / 380V 50Hz |
Weight of machine | 1150kg | 1300kg | 1400kg |
Overall dimensions | 2870X1850X2750mm | 2870X1850X2750mm | 2870X1850X2750mm |
- Q:The attic is covered with a multilayer board that needs cutting and the cut part needs to be coated with edge coating.What kind of paint is it with edge coating? Ordinary alkyd paint, okay? Or special carpentry paint?
- Usually with a closed varnish on it, the market to sell mainly polyester, in addition to see if you need to do other uses, if only the edge of the use, then buy the market of polyester closed varnish on the OK! This can be used for closed purposes!
- Q:Today I bought a set of cabinets, in order to forestry Jilin Lushuihe EO health specially selected the particleboard, particleboard on both sides but when construction workers in the marble table below the pad without edge, now feel that the taste is quite big, and the estimate is. Consult an expert, how do you do the edge banding for the shaving board? With solid wood edge strip or PVC or aluminum foil? With universal glue, you can reduce formaldehyde emissions to achieve the effect? Thank you very much！
- EO what formaldehyde release ah... Or EO particleboard with white latex seal ah, but thin thickness
- Q:What is woodworking edge banding machine?. What role does it play?
- Woodworking edge banding machine:One of the woodworking machinery, solid wood machinery. Edge banding machine, as its name implies, is used for edge sealing. The edge edge bander program is highly automated and can complete conveying glue - off - on - block before and after trimming, under the upper and lower edge finishing scraping - polishing various processes.Edge woodworking machine is suitable for medium density fiber board, blockboard, wood, particleboard, plywood and other linear polymer doors, edge trimming, disposable with double-sided adhesive tape cutting edge, the edge, with a bonding, pressing block, chamfering, rough trimming, scraping and polishing finishing functions, delicate and smooth edge and feel good, smooth straight line closure.
- Q:How about the east edge banding machine?
- Extremely East, liar! When buying, said he was South Korea imports, in fact, counterfeit domestic goods, not their own factoriesFortunately, it means three domestic brands. Please enjoy yourselfColleagues said Nan Xing woodworking, Yongqiang, Ma.
- Q:How much is the banding strip one meter?
- Have the edge of PVC, one or two dollars a meter, with the glue stick you every button down. Aluminum alloy with what glue you are not strong, it is recommended not to use, aluminum alloy will be deformed, and not too sticky.
- Q:Can the kitchen cabinet carbonization door plank do the acrylic edge banding? Optimistic about a set of kitchen cabinets, aluminum alloy plate, carbonized board. I don't like aluminum alloy hemming. Optimistic about color and brightness of carbonized board. Do not know the carbonized board is good to do acrylic edge?
- This is a bit difficult, because the carbonization plate hardness is relatively high, with normal cutting devices to avoid cutting edge collapse, so usually used to wrap aluminum edge chipping, aluminum edge back hook part can cover up the small, if you want to use acrylic edge would need very good cutting devices also, edge machine requirements are relatively high, in the edge sealing machine before the first clear edge, also will bring the edge collapse, so unless there are special equipment manufacturers can do.
- Q:I want to buy Woodworking Machinery and equipment, doing furniture, see South East Xinghe, sensory quality is good, but the price is not high. I heard that the quality of almost the same with them, the higher cost performance, please experts recommend to me. Henan, Shanxi, Shaanxi is the best distribution point, I would like to see. After sales service do not good businesses do not consider
- South Hing cost-effective points, their professional plate type machinery, we used before the factory is also the South Hing, after-sales service is good,
- Q:Why does our family seal edge fall off, cabinet experience deformation?
- A whole wardrobe is good, and its edge is also very important. Edge sealing is good, directly affect the cabinet deformation. Small manufacturers and small workshops are not, and basically the use of artificial sealing edge, sealing effect is poor, and even fall off, deformation, affecting the normal use of the wardrobe. I saw Elijah, edge line, edge machine good estimation.Cabinet deformation, then with the wardrobe plate, door frame and so on, as well as the assembly is not closely related. In small factories or small workshops produced wardrobe, prone to Jerry built, wardrobe panels, door frames thickness does not meet the standards, assembly does not meet the specifications, and even cabinet size is too large or small. So out of the so-called whole wardrobe, of course, may be deformed and twisted.
- Q:What is the cabinet edge?
- Is the cabinet door around four sides, mainly to see the door what material is the edge, general Aluminum Alloy is the most common, but this kind of easy sealing seam, long time will be difficult to take care of grease.Now here in Shanghai a little better cabinets, are sealing material and door panels are made of the same materials, such as paint door, the edge is together baking, so there is no gap, easy care, will not let the formaldehyde inside the cabinet door release.
- Q:I am a furniture factory, need a lot, it is best to paint to dry is the best, the ash inside the shop, if the dry time is too slow for local repair will be dust, it will look at the dust, affect the quality of the product.
- Or engage in equipment, see what reason end edge after the show mainly has several aspects, one is only one side of the saw, if it is open at the end, you saw the small saw blade is too high, it low, or with a pre wash milling is good, if the two sides open at the end, it is too big to glue look, what reason, if it is winter, due to low environmental temperature, glue just painted on the solidification, the pressure is not real, for glue, stick firmly, installing plate preheating device can solve the problem, the problem is not winter, edge glue painted edgeband sub pressure wheel pressure is not enough no, pressure, or your gum is not good quality, short solidification time, low temperature may also glue you to adjust, will cause this situation. If your edgeband side open at the end, it is your problem finishing knife adjustment, adjustment is too large, it is good to adjust
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Woodworking Band Saw Machine with Wood Vertical Saws
- Ref Price:
-
- Loading Port:
- Guangzhou
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
