7 Ton Wheel Loader (SWL70G)
Transmission:Hydraulic - Mechanical Transmission
Load and Unload Method:Front Discharge
Certification:CE, ISO9001: 2000
Front End Wheel Loader:Wheel Loader 5 Ton
Shovel Loader Dumping Height:3100mm
Max. Travelling Speed:37.5km/H
Total Hydraulic Cycle Time:11.1s
Packing:One Unit Per 40hq Container
Standard:ISO9000 CE Gost-R
• The design for automatic dust removal of engine exhaust is good for maintenance;
• Single-turbo hydraulic torque converter together with countershaft gear box, this simple
makeup enables convenient repair and high work efficiency;
• 4-wheel caliper disc braking system ensures safer and reliable operation;
• Steering system adoping constant current exposed circuit steering system makes steering performance
at different speed and linear travel stable;
• Higher dump height and bigger dump reach can satisfy more work requirement;
•z-form connecting rod has strong break out force and high raising ability and enables high operating efficiency;
• Support of two rocker-arms enables stable performance;
• A broad view and a comfortable seat enable easy and flexible operation;
• Knock-down cab enables a wide work range;
• Rational matching parts, superior machine performance and extraordinary operating efficiency;
• Various optional equipment and buckets can satisfy different needs of customers.
16 / 70-20
Performance parameters of entire machine
Rated loading capacity
Digging Depth(bucket lean forwards 10 degree
Number of shifts (forward reverse)
Fuel tank capacity
Hydraulic fuel tank capacity
Total cycling time
Forward gearⅠ9 km/h
Forward gearⅡ22 km/h
Optional Equipment (with different payment)
Optional Equipment (with different payment)
Loose material bucket, rock bucket, quenched integral cutting edge bucket
Side dump device, clamping(Pipe or grass) device, high dump device
Cool air, warm air, air-condition (cool & hot)
- Q:Truck loader 3 revision twenty-third how to pass?
- you will quickly reach the elevator, and smoking a big box, arrive you can put the box installed, because of the large box is placed inside, and then touch the left of the green button, the box will be down, the long packed the box to pack again a small box, OK.
- Q:How much is the rent for the 50 loader?
- Generally about 50 per hour between 180-200 shovel shovel 50 engine general 220 horsepower fuel consumption per hour in about 14.5 liters of oil by a passenger you calculate it if I see each other refueling per hour at 120 yuan for the minimum of not less than 90
- Q:50 is the price of the loader 50?
- The price is acceptable, although low, but never mind, if it is time to buy the dragon is about 260 thousand, just three years back, depreciation is not very powerful, I have this car for five years, now is not what big problems, if not live tired, three years after that, you will have to sell a one hundred thousand or so, go do it, as long as the money hold on the line, slowly after the contact is good to live!
- Q:What does the dual pump combination on the loader mean?
- Double pump refers to the hydraulic pump and steering pump, when no steering action, two pumps through the mixing valve [also called priority valve] simultaneously supply oil to the multi valve, increase the supply of working device, improve work efficiency. When turning, give priority to steering gear.
- Q:What is the direction of the loader without direction?
- My paper loader 50F direction to move, I have changed the direction of the steering pump machine for tank washing to oil bar also looked empty when there are hanging when walking will not move, what method can I get
- Q:What causes black smoke from loaders?
- The causes of black smoke in loaders and the ways to remove them are as follows:1. The air filter is blocked and the air cylinder is not inflated enough. The air filter element should be cleaned or replaced;Two, supercharger failure, causing insufficient supply pressure, so that the diesel engine combustion is incomplete, should overhaul turbocharger;Three, injector atomization or drip phenomenon, should repair the effect of injector nozzle replacement, when necessary (needle valve);Four, oil supply time adjustment is improper, there are two kinds:A. exhaust pipes emit black smoke, while the cylinder is accompanied by crisp knocking and rough work. This phenomenon is generally caused by premature delivery time. The oil supply time is too early and usually causes difficulties in starting.The B. exhaust pipe emits black smoke, while there is flame in the muffler and the sound is muffled. This phenomenon is due to the late delivery time. Oil supply time is too late, often cause diesel overheating, exhaust temperature rise, and may even burn parts.In addition, a diesel engine with an oil supply angle advance device may emit black smoke at high speed. It may also be due to the damage of an automatic feed advance device in the fuel supply angle, and an automatic fuel injection angle advance device shall be disassembled. If the fuel supply time is improper, the method mentioned above can be checked and adjusted.Five, each cylinder uneven oil supply.The exhaust pipe emits black smoke, meanwhile, the machine vibration is serious, and the oil supply for individual cylinder is too much. It can be checked out by "broken cylinder method";Six, poor quality diesel.Poor quality diesel, poor atomization, resulting in incomplete combustion, the tank should be cleaned and replaced by diesel oil.
- Q:What is the relationship between a forklift and a loader?
- Forklift is loader, because he is the front of the shovel installed, so we call him a forklift, loaders can be installed in front of wood claws, or you can install the same fork with a forklift
- Q:What are the reasons for the high water temperature of the loader?
- Two. Clean the brake discThe soil on the brake disc should be carefully washed. If it is too dirty, it will damage the piston dust ring for a long time, resulting in the corrosion of the piston, and finally cause the brake to bite. In particular, some stones should be cleaned in time so as not to scratch the brake disc. In the high-speed running highway should pay attention to use his nose to smell, if smell a burnt smell is immediately pull over and see whether the brake deceleration smoke, smoke phenomenon that the brake temperature is too high should stop to rest, avoid the brake failure caused by high temperature.Three, ventilation reduces engine temperatureIn summer, the temperature is too high will make the loader engine oil viscosity decrease in the work process, resulting in the loss of engine power to reduce the lubricating effect, in the hard work when the temperature is too high can open the side door ventilation hood to reduce the temperature of the engine.Four 、 fan drive beltCheck the fan drive belt, after long-term use, the belt will be tired, deformed and loose, change the belt, you should choose the correct type and length, properly adjust the belt tightness after installation.
- Q:What is the length, width and height of the 50cn body of Liugong loader?
- Different auxiliary working equipment can be changed, and the lifting, lifting and other materials such as wood handling can also be carried out. In the road, especially in the construction of high-grade highways, loaders are used for filling and excavating of subgrade engineering, aggregate and loading of asphalt mixture and cement concrete field. In addition, the soil can be pushed, flat ground and other mechanical traction operations. As the loader has the advantages of fast operation, high efficiency, good maneuverability and easy operation, it has become one of the main types of earthwork construction in the construction of the project.
- Q:How long will it take to change the hydraulic transmission oil for the loader?
- The new 300 hours change, then every 2000 for 8 oil, heavy work, then a little shorter time
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range