Waterproof DC 24V DC RGBW Flexible Led Strip 4 Colors in 1 Led
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 500000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Waterproof 24V RGBW Flexible Led Strip 4 Colors in 1 Led
Item: BL-FB-5050-RGBW-420
24V RGBW Led Strip Specfications:
| Product name | RGBW Led strip |
| Part number | BL-FB-5050-RGBW-420 |
| Inpute Voltage | DC12V/24V |
| Power/m | 20.0w/m |
| Rendering Index | >80Ra |
| Working Temperature | -20+60°C |
| Frequency | 50-60HZ |
| Humidity | <85< span=""> |
| Power Factory | >93% |
| Brightness | 420x20 lm |
| Lumen decline | <2% Per 1000hs |
| Dimension | width:12mm length:5m/reel |
| LED quantity | 84 LEDs/m |
24V RGBW Led Strip Features:
1.Use the super brightness SMD5050 LED chip as as lighting source.
· 2.420 super brightness 5050 LED/5M.
· 3.Size:5000X12MM
· 4.Available RGB+W(2700k-6500k)
· 5.Input Voltage :DC12V/24V
· 6.Max power :100W
· 7.Can be cut by 6 LEDs and connect again by our accessories.
. 8.This 5050 led strip can be changed into waterproof with type A-silicone tube IP65, type B-PU glue.
24V RGBW Led Strip Parameter:
24V RGBW Led Strip Advantages:
1) Continuous length flexible LED light strips
2) 5 meters/roll, cuttable every 5cm
3) Runs on 12-volt systems like solar cell charged batteries
4) Super bright SMD top LED
5) Solid-state, high shock or vibration resistant
6) Major reduction in power costs
7) 120-degree wide angle illumination
8) No RF interference
24V RGBW Led strip pictures:
24V RGBW Led Strip Application:
1.Architectural decorative lighting
2.Arshway,canopy and bridge edge lighting
3.Amusement park,theater and aircraft cabin mood lighting
4.Emergency hallway lighting
5.Stairway accent lighting
6.Auditorium walkway lighting
7.Concealed lighting
24V RGBW Led Strip Packing:
Our certificates:
Our showroom and we were at Hongkong Lighting Fairs:
- Q:The structural difference between the LED low voltage band and the high voltage band
- In short, the line is the biggest difference! Low pressure is generally three parallel light bead! Yes, three open cuts! High pressure (except for one meter a customized)
- Q:How many light slots should I leave for the LED light belt?
- This size is OK, but LED and T are different, so you should put the line from the top to the bottom, because each LED has to connect to the power alone, and the T4 and T5 can be connected
- Q:LED which bands are suitable for use?
- The main uses of LED hard light strip are: jewelry, display counter, home villa lighting, hotels, shopping malls, office buildings, leisure places, decorative lighting and other lighting places, is an ideal lamp to replace the traditional fluorescent tube.
- Q:How do I connect the two LED light bands?
- Connect two LED lights, you need to see what kind of LED light belt, and some light belt itself has reserved lights, with serial plug, they can be directly inserted together.
- Q:What do you mean by "LED" belt model 5O5O and 3528?. How different
- This is a call to the industry which distinguish the default type lamp, with dimensions to name, length and width are 5050 5mm, 3528 3.5*2.8mm, 5050 conventional is 0.2W (the equivalent of 3 of the 3528 chip package inside) rated current is 60mA, the single brightness is about 18-20LM. The 3528 is 0.06W, rated current 20mA, single brightness is about 6-7LM, of course, the price of 5050 is 3528 times 2-3
- Q:What kind of power supply should the LED light belt be equipped with?
- The above two kinds of power supply usually have a dedicated integrated switching power supply. There are also some simple LED power supplies that are used for LED lamps after capacitive buck rectification.
- Q:How to connect the LED lamp with constant current drive?
- Both ends of the line is relatively early and also a common method, because of its convenient wiring, aging, simple and so on. So far, there are many LED lamp manufacturers. The two pins of the lamp cap are shorted together, then connected to the constant current power on the inside. Such a wiring method only needs to be removed from the traditional starter, so that it can work properly.
- Q:What should I pay attention to when installing LED soft light belt?
- Each meter has a "scissors" mark, only in the mark to cut, scissors or scissors will lead to one meter does not light, it is best to carefully look at the mark before the location, according to the middle of no connection can be cut.
- Q:How many meters does the LED flash band need? A controller?
- The controller is used for receiving signals, and the number of meters does not matter. As long as there is sufficient switching power supply to the lamp band, it is possible to meet the power requirements of the parallel light band. Or, in a certain range of load, you can then connect the signal amplifier, you can use a controller to connect the effect of numerous lights!
- Q:What's the brightness of the LED light band? Can I use it for lighting?
- Brightness can be, you can buy that SMD 5050 high brightness, 15 lumens / grain, white light, three LED chip,.SMD 3528, 5 lumens / grain, white light, single chip per
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Waterproof DC 24V DC RGBW Flexible Led Strip 4 Colors in 1 Led
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 500000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
