Water Pump with Good Quality Made In China On Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
1)High performance
2)Mechanical seal
3)Cast iron impeller or bronze impeller
4)Lower vibration water pump
5)Large flow
2.Packaging & Delivery
Packaging Detail: | export wooden cases |
Delivery Detail: | within 30 days once receipt of 30% T/T prepayment |
BPO Irrigation Centrifugal Split Water Pump
3.FEATURES
BPO series single-stage double-suction open type centrifugal pump self-researched by the Company after absorbed advanced technology of similar products and combined application requirement of various customers. The series pump adopts excellent hydraulic model, wider type spectrum and better structure. Pump casing is produced by special machine tool, which ensures concentricity among shaft bearing, shaft and pump case, and provides better reliability and maintainability. Apply to municipal water supply and drainage, water circulation of air conditioner, agricultural hydraulic engineering, such as irrigation, drain flooded fields etc., industrial water supply system, firefighting system, water supply and drainage of
heating system, transportation of clean water
4. OPERATING CONDITION
a)Rotate speed: 2950r/min, 1480 r/min, 980 r/min, 730 r/min
b)Flow range: 64.4~9810m3/h
c)Delivery lift: =200m
d)Medium temperature: =80 ,
e)product adopting special materials: -20 ~120
f)Ambient temperature: Lower than 40
g)Operating pressure up to achieves 2.5MPa
5. MATERIAL
a)Pump casing: Cast iron or magnesium iron
b)Pump cover: Cast iron or magnesium iron
c)Impeller: Cast iron, magnesium iron or tin bronze
d)Sealing ring: Cast iron or tin bronze
e)Pump shaft: 45# steel plated with chrome
f)Dynamic and static mechanical sea: Hard carbide, graphite
g)Configuring other material according to requirement is allowable
Rated flow | 10(m3/h) |
Rated head | 26m |
Rated power | 1.5Kw |
Voltage | 220V |
Rated Current | 7.2A |
Rated speed | 2860r/min |
Discharge diameter | 50mm |
6.Conditions of use
Pumps used in the following conditions should be continuously to work properly:
1. For water pumps suitable medium, medium temperature shall not exceed + 40°C
2. The medium PH value between 6.5 ~ 8.5
3. The volume of medium containing solid impurity is less than 0.1%, the size is not more than 0.2 mm
4. The power frequency 50 hz, voltage for single-phase 220 v, 380 v, three-phase voltage fluctuation range for rating of 0.9 to 1.1 times
5. Diving depth of no more than 5 m, is not suitable for irrigation and drainage of sewage and chemicals.
- Q:I cant get water to flow though the motor It seems like the pump isnt working any advise!
- Since you've done all the normal fixes already i think you should look at the possibility that your cam shaft is worn or the lifters. I'm not sure if an evinrude 20hp engine has lifters but i've had this same problem a few years back when chevy put cheap cams in some of their vehicles. The lobes on the cam were rounding off instead of being a teardrop shape and the vehicles would start and idle fine but would pop like mad on acceleration. Hope this helps!
- Q:This is what it is doing- the actual pump that is in its own little shed CLICKS all of the time water is being ran, even a small amount of water. The water pressure goes to a slow trickle and eventually stops completely. After about 20-30 minutes I go back and check the spickets and the water is fine, but quickly repeats this same cycle. We just installed this pump about 3 weeks ago. It was doing fine until last week. Does it need to be primed or pressure switch settings increased or decreased? Or am I talking totally out of my head?!
- Its either faulty, or was installed wrong.
- Q:Is it cheaper to run an electric water pump or a furnace?
- heat water/pump. not sure what that is but I know what a heat pump is. If that whats your talking about thean the answer is well...yes and no. depending on cost of gas and electric typical a heat pump is better to run for heat as along as its above freezing outside. It will still work and put out heat all winter but it won't be much heat for what your paying for, at which point your better with gas heat.
- Q:We still have water, but it keeps constantly running, and won't stop. The pump itself got warm/hot, and we're afraid that it's going to get ruined or blow up or something. We turned it off for about 30 minutes, then back on to bottle up some water. It's the middle of a snowstorm, and a horrible time for a water pump to stop working, help please!! Any suggestions and fixes, please let me know. Thanks!!! :)
- Should be a valve on your pressure tank. That is what you turn off or the sheer volume of water in it will keep water flowing until it empties out.
- Q:Can the water from the fire pump enter the roof fire tank? Why?
- Here is the concept of "fire water tank", if the roof has fire water tank, fire pump should be able to roof fire water tank water supply, as long as there is sufficient pressure on the line. However, if the roof water tank is only a living water tank, the fire pump is not started, this is the two pipelines.
- Q:The actual way to move water (liquid) from a pond with small bits of debris. Trying to find out which system is the most efficient: vane, impeller, rotary, centrifugal...etc...either by hand or using a bicycle to turn the pump. I do NOT want to use an engine or electric motor. I've read about the transfer pumps in the hardware store are only about 50% efficient, I need something better that will provide me a continuous output. Something lightweight that will handle pressure. Any ideas? Thanks in advance!!
- Most efficient (fewest parts) is a lift pump. The simplest example is if you use a bucket. You can make this easier to use with a few extra parts to make a shadoof the only losses are friction in the pivot and any leakage that takes place.
- Q:My house uses a pump that draws well water. With a family of four, I had never had a problem running out of water, even through 4 morning showers. Recently however, I have started running low and sometimes even run dry of water, although it’s now just me and my wife living at home. The pump is only a couple of years old. A couple of neighbors also have wells and pumps, so I don’t believe the water shelf has run low. The holding tank is at least 15 years old and probably older. I don’t know if it has a bladder, but I think it does. It’s a Wel-Trol brand. I’ve checked the pressure with a tire gauge and it holds at 30 psi. Also, it seems the cut in and out switch has a mind of its own. It especially would continue to run, even though the pressure hit cut-off level. Any ideas or suggestions?Thanks
- Hmmmmm. I think I would look at the pressure switch here if you can confirm that the well does have adequate water in it. The next thing is the small pipe that the pressure switch mounts on. If it is galvanized these have a tendancy over the years to build up deposits and rusty scale and may need to be replaced. It sounds like you have the bladder style of pressure tank and that is a good thing. To check the proper pressure in the bladder watch to see the cut off pressure of the pump as it cycles. Note this. Turn the pump off and completely drain off the pressure tank. Check and adjust the pressure at the top of the Wel-Trol to be 2 to 4 pounds less than the pressure cutoff that you noted using compressed air. As the other posts have mentioned you also may have a leak in the pressure line to your house. The way to test this is turn off all the water to the house and see if there is a check valve in the T at the pressure tank. It will look like a tube about 2 inches in diameter and 4 inches long. Usually there is not one here as they clack when the pump shuts off. If there is not one note the pressure. See if it drops. There should be no drop. If it is a drilled well there may be a leak in the pipe down the well and this usually requires a visit from a well servicing company to determine. Hope this helps.
- Q:I was wondering if water pumps make any noise when they are submersed? Also, my pond is quite small and I don't want to scare my fish with a noisy pump. Thank you!
- It has been years since I had a pond. It was a freestanding pool with a fountain in it. I don't recall any noise from the submersible pump, only the sound of the splashing water. I doubt this type of pump has become noisier over the years. Below is a link to a site with many helpful articles about ponds, pumps, and systems.
- Q:does anyone know the proper way to take the lower gearcase off and install a new water pump kit. it is a 1986.
- This is a simple repair but I'd recommend that you get a service manual, ether a factory manual or one of the generic Seloc manuals. The key things to do are mark the trim tab so you can put it back in the same position after repairs. Drain the oil. Removing the bolt that is in the hole at the back end of the upper housing, as well as all the obvious Nuts. both above and under the cavitation plate. Put the drive in forward gear, which takes the tension off the shift shaft. Once all the nuts and bolt are loose. Jiggle the drive and it will separate from the upper housing. You now have access to the water pump housing. Remove the housing and pull it up and off the d. Shaft. Inspect fully and account for missing impeller blades. When you re assemble Lube the impeller and put the drive key in place and put the impeller in place. Slide the housing down to the impeller. You can use ether th drive shaft or the propeller to turn the drive shaft in a clockwise direction as you apply pressure on the housing, It should slide down over the impeller. Reassemble in reverse order. Slide the drive shaft up into the upper housing turning the D. shaft using the prop to turn the shaft. Watch the water tube slip into the guide tube. Once it's in place put a couple nuts on then check the gear shift to make sure it goes F-N-R. Bolt up and fill with oil. Good Luck!
- Q:What are the export pumps packed in cartons?
- Our imported pumps are covered with plastic tape and bolted to wooden containers. The wooden box is nailed down.Naturally, the larger pump uses the larger container accordingly.Suggest exports, as sure as imports, OK.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Water Pump with Good Quality Made In China On Sale
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords
