Water Pump of Cheap WQ Series Submersible Sewage Pump Made In China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
1)High performance
2)Mechanical seal
3)Cast iron impeller or bronze impeller
4)Lower vibration water pump
5)Large flow
2.Packaging & Delivery
Packaging Detail: | export wooden cases |
Delivery Detail: | within 30 days once receipt of 30% T/T prepayment |
BPO Irrigation Centrifugal Split Water Pump
3.FEATURES
BPO series single-stage double-suction open type centrifugal pump self-researched by the Company after absorbed advanced technology of similar products and combined application requirement of various customers. The series pump adopts excellent hydraulic model, wider type spectrum and better structure. Pump casing is produced by special machine tool, which ensures concentricity among shaft bearing, shaft and pump case, and provides better reliability and maintainability. Apply to municipal water supply and drainage, water circulation of air conditioner, agricultural hydraulic engineering, such as irrigation, drain flooded fields etc., industrial water supply system, firefighting system, water supply and drainage of
heating system, transportation of clean water
4. OPERATING CONDITION
a)Rotate speed: 2950r/min, 1480 r/min, 980 r/min, 730 r/min
b)Flow range: 64.4~9810m3/h
c)Delivery lift: =200m
d)Medium temperature: =80 ,
e)product adopting special materials: -20 ~120
f)Ambient temperature: Lower than 40
g)Operating pressure up to achieves 2.5MPa
5. MATERIAL
a)Pump casing: Cast iron or magnesium iron
b)Pump cover: Cast iron or magnesium iron
c)Impeller: Cast iron, magnesium iron or tin bronze
d)Sealing ring: Cast iron or tin bronze
e)Pump shaft: 45# steel plated with chrome
f)Dynamic and static mechanical sea: Hard carbide, graphite
g)Configuring other material according to requirement is allowable
Rated flow | 10(m3/h) |
Rated head | 26m |
Rated power | 1.5Kw |
Voltage | 220V |
Rated Current | 7.2A |
Rated speed | 2860r/min |
Discharge diameter | 50mm |
6.Conditions of use
Pumps used in the following conditions should be continuously to work properly:
1. For water pumps suitable medium, medium temperature shall not exceed + 40°C
2. The medium PH value between 6.5 ~ 8.5
3. The volume of medium containing solid impurity is less than 0.1%, the size is not more than 0.2 mm
4. The power frequency 50 hz, voltage for single-phase 220 v, 380 v, three-phase voltage fluctuation range for rating of 0.9 to 1.1 times
5. Diving depth of no more than 5 m, is not suitable for irrigation and drainage of sewage and chemicals.
- Q:My dads needs a new water pump for his '83 Silverado v8, anyone have a DIY or a schematic or know of where I can find one? Maybe someone could tell me how. He's pretty handy with cars just doesn't know what needs to come off and in what order. -Thanks in advance!
- 83 Chevy Silverado
- Q:We bought a plot of land and me and my father found a deactivated water well in there. We checked and it's 328 feet deep and is still full of water.How would i go about setting up a pump on it?
- have that water tested before you do anything.
- Q:A pump, the flow rate of 30T/H per hour, lift 30 meters, should be allocated more power motor?
- The actual use of power should be at least 5.5kW, I did not find 30t/H lift 30 meters of the water pump, and only he approached the model, supporting a larger power, and will not increase the power consumption
- Q:the outboard runs fine and pumps water out with muffs on but when i put it in the water it doesn't pump any water at all. could it be that the impeller needs replacing? what do you think?thanks
- Replacing okorder /
- Q:How hard is it change a 1993 subaru imprezza water pump
- www.okorder /... Difficulty is dependent on how comfortable you are with doing the above.
- Q:2 different pulleys are in the way of the 2 remaining long bolts. at each end of the pump. tensioner did not need to be moved as belt is already off. Motor mount is 1/2 way removed and motor has dropped slightly gt; Am reading a jack must be placed under motor with wood via oil pan ( am hoping no other damage was done) Am told there is a certain device available to remove the pulleys? ... -Would appreciate anyone's info and advice on the remaining steps to this procedure on this make and model engine. as I have come into it obviously with it having begun the wrong way!! Thanks!!
- Are you sure? Try using a search engine (could be Bing, Yahoo, Google).
- Q:7.63Determine the isentropic efficency of a water pump when water enters as a saturated liquid at 96.5 kPa and exits at 5 MPa and 106 degrees C.Thanks
- Isentropic Efficiency
- Q:I have a 2006 Mitsubishi Raider that I'm pretty sure needs a new water pump. It is still under warranty for another 1000 miles, but the nearest dealer is over 200 miles away, and Mitsubishi says they won't reimburse for work done at a non-Mitsubishi Dealer. I'm trying to figure out if the cost of just paying someone to have it done here in town versus having towed 200 miles and then driving it back, plus the lost cost of missed work.By the way my Mitsubishi Roadside Assistance will tow it to the nearest dealer for free, but last time I did that it was barely worth the hassle of dealing with their very poor contract towers.
- Have you asked the dealer to send you the part at least? Call Mitsubishi and ask it that would be possible, you never know. You could send in the old pump and possibly get compensation. Keep your bills. Discuss it with them. Your dealer should provide you with the area Mitsubishi representatives contact information. The prices for those can be expensive. Ask the dealer, service dept, for the labour, how many hrs. to change the pump. They should tell you. Also for the cost of the pump. Add the two together and you have your ans. Join CAA, or AAA, get a gold card, wait two days for the card's towing to take effect, then have it towed in on the card. Done all the time. Or if you have a relative with a Gold card they can have it towed in as long as they are with the car with their card when the tow truck comes.
- Q:my friend has a 2008 Buick Lucerne V8 model. She said its over heating, and steaming from under the hood. the engine is also knocking. Could this be a water pump issue or something else?
- What ever it was it has the engine knocking. Its a little too late to wonder now. Sounds like it lost water and then kept running until she ruined the engine.
- Q:What are some good brands of aquarium water pumps? I have had bad experiances with Hydor Seltz (cheapest ones I could find, ugg, I know, you get what you pay for) pumps, failing very quickly, and sounding like plastic gears grinding around inside. What is the best kind to get?I need one that's around 150gph
- i have a topfin that works well for me.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Water Pump of Cheap WQ Series Submersible Sewage Pump Made In China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 100 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
