Packaging & Delivery of Wafer Type Check Valve
Packaging Details: wooden case applicable for shipping
Delivery Detail: 30days
Specifications of Wafer Type Check Valve
valve type: wafer, nominail pressure: 1.0/1.6MPa, DN50-DN400, certificate: ISO9000, ISO40001, CE, API, EN1074
series: Dual plate check valve
1) Size: DN40-DN400
2) standard: API594 ANSI 16.34
3) pressure standard: API598
4) face to face: ISO5752, DIN3202
5) body: cast iron/ductile iron/WCB
6) Seal ring: NBR/EPDM
7) Shaft: Carbon Steel/stainless steel
8) suitable temperature:-15~150
- Q:What type of check valve is the h61y-40 check valve?
- The disc type check valve is simple in structure and can only be installed on the horizontal pipe. The sealing performance is poor. Five. Check valves: Valves sliding along the centerline of the valve. Pipe type check valve is a new kind of valve. It is of small size, light weight and good processing technology. It is one of the developing directions of check valve. But the coefficient of fluid resistance is slightly larger than that of the swing check valve.
- Q:How do I install the pump outlet check valve?
- Because the check valve is easy to be damaged, therefore, the check valve shall be installed near the pump outlet, and a shut-off valve (usually ball valve or gate valve) is arranged on the top of the check valve, so that it is easy to overhaul. In order to facilitate the check valve before disassembly pressure relief, the valve itself is not equipped with a net valve, should be installed between the check valve and the shut-off valve with pressure relief valve.
- Q:What is the function of the check valve on the air compressor?
- Check valve to prevent backflow of gas compressor back to the machine in a series of problems, as followsA gas flow will lead to failure, load startup, startup process if the machine internal high pressure will cause the motor overload start, starting current of the motor will be too high, at the same time, the impact of transmission components is also very large, generally good machine will be some type of protection.Two, multiple units of the system may make the tank filled with water, resulting in the unit can not start properly.Three, because of the shutdown state, most of the air compressor unloading valve is open, so if the gas flow back, but also cause energy losses.
- Q:What does the check valve "H44Y-160" mean?
- Take a look at that JB/T 308 valve model compilation standards, which explain very clearlyH check valve, 4 flange connection, 4 spiral structure, Y is hard sealing hardfacing alloy. 160 is nominal pressure
- Q:Can the check valve be horizontally installed?
- Sure. As long as the direction of the check valve is installed, it's no problem how to install itWe can sell this, I know the user name is my phone, you go to the Advisory bar ~!
- Q:The difference between the plunger type check valve and the lift check valve
- Lift check valve is to rely on the flow of the media itself and automatically open and close the valve flap, used to prevent media backflow valve, also known as check valve, one-way valve, counter flow valve, and back pressure valve. The check valve belongs to an automatic valve, whose main function is to prevent the backflow of medium, prevent the reverse of pump and drive motor, and release the container medium. The check valve can also be used to provide a supply to the auxiliary system where the pressure may rise above the system pressure. The check valve can be mainly divided into swing check valve (rotating by gravity center) and lift check valve (moving along the axis).Hope to be of some help to you!
- Q:The difference between backflow preventer and check valve
- In abnormal pressure (i.e., the outlet pressure is higher than that of the middle cavity), even if the two check valve can not reverse sealing, safety relief valve can automatically open the reverse water emptying, and the formation of air separation, ensure the health and safety of water upstream.
- Q:Installation position of air pipe check valve
- Texture of material1. cast iron check valve2. brass check valve3. stainless steel check valve4. carbon steel check valve5. forged steel check valveCheck valve refers to rely on the flow of the media itself and automatically open and close the valve flap, used to prevent the media back flow valve, also known as check valve, Dan Xiangfa, counter flow valve and back pressure valve. The check valve belongs to an automatic valve, whose main function is to prevent the backflow of medium, prevent the reverse of pump and drive motor, and release the container medium. The check valve can also be used to provide a supply to the auxiliary system where the pressure may rise above the system pressure. The check valve can be mainly divided into swing check valve (rotating by gravity center) and lift check valve (moving along the axis).The function of this type of valve is to allow the medium to flow in one direction and to prevent flow in the opposite direction. Usually the valve is automatically work, fluid pressure flow in one direction, the valve open; the opposite direction of fluid flow by gravity, fluid pressure and valve closing effect on the valve seat, thereby cutting off flow.
- Q:Is the check valve the same?
- Same。 Call a difference; a thing. You come to our store to have a look.
- Q:Are check and check valves the same kind of thing?
- The same thing is not the same as it is
Our products are in accordance with different standards, such as API, DIN, JIS, BS, and GB, as well as non-standards. We also provide OEM products according to client requirements. Our products are widely used in oil refinery, petroleum, chemical plant, power station, natural gas, and civil industry. We have obtained ISO9001 International Quality Management System Certificate.
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
||OEM Service Offered
|Product Price Range
||High and/or Average