Valve with Large size Non Rising 36 Made in China

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
200 kg
Supply Capability:
10000 kg/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1.Structure of Gate Valve Description

A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through the liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Also, a partially open gate disk tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively high fluid velocity causing disk and seat wear and eventual leakage if used to regulate flow. Typical gate valves are designed to be fully opened or closed.When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.

 

2. Main Features of the Gate Valve

• Valve body cavity using non-toxic epoxy resin,both inside and outside flashboard completely is coated with rubber

•  Free of water pollution

• High manufacturing accuracy

• High strength

• Environmental protection and energy saving

• Good visual effect

 

3. Images

 Valve with Large size Non Rising 36 Made in China

Valve with Large size Non Rising 36 Made in China

4. Gate valve Specification

Valve with Large size Non Rising 36 Made in China

 

5.FAQ

1. What's are the characteristics of gate valve?

The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. 

2. What is the work principle of gate valve

 The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. 

3.  What is the structure?

Bonnets provide leakproof closure for the valve body. Gate valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest, offering a durable, pressure-tight seal. Union bonnet is suitable for applications requiring frequent inspection and cleaning. It also gives the body added strength. Bolted bonnet is used for larger valves and higher pressure applications.

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Valve should be strictly marked according to the direction of instructions and media flow direction to determine the installation direction,
Pro, strong counterpart refers to the valve in the pipeline connection, generally refers to the thread connection or welding to connect the valve, the valve and pipeline connection imposed by the larger external force, it will cause great stress and plastic deformation, easy to cause the valve to open or close the lax.
Q:Mechanical valve
I think it's the filter. The valve unit you know, you know, or Baidu. Then contact.
Q:What's the material of j41h-16p's valve?
J41H-16P is: manual stainless steel flange, hard sealing stop valve, pressure 1.6MPa. Material: 304.
Q:Several problems about valve parameters
FV or LV on the flow chart, which represents the instrument bit number, FV is flow valve, and LV is level valve.The valve on the nameplate CV value, it is a measure of the size of the valve flow, it is the concept of 40 - 60 degrees Fahrenheit in the water, the pressure drop of 1 psi, in a valve opening per minute flow through the valve (U.S. gallons).
Q:How to use current to control valve opening and closing?
A relay or PID controller can achieve this operation, only need to set out, the valve can use electromagnetic valve, which belongs to a rapid opening and closing valves, only need to control the electric power to the valve can automatically open or closed, but the temperature change is large, if you want to keep the temperature constant. The best selection of regulating valve, constant temperature control valve will be before or after the valve, the main electrical control knowledge, do not know what I said is clear, remember the points, thank you!
Q:How do you calculate the valve wall thickness, pressure, and other valve design calculations in a spreadsheet?
The valve wall thickness is the standard valve check directly in the relevant standard, for insert grade valves need to use interpolation method to calculate the valve wall thickness, actually don't need what difficult to complete in EXCEL software.
Q:What are the general types of valves?
Valve is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure.Function and use(1) cut off categories: such as gate valve, globe valve, plug valve, ball valve, butterfly valve, needle valve, diaphragm valve and so on. Cut off valve, also known as closed-circuit valve, stop valve, whose role is to connect or cut off the pipeline medium.Check valves, also known as check valves or non-return valves, check valves belong to an automatic valve, its role is to prevent the pipeline medium backflow, to prevent the pump and drive motor reversal, as well as the leakage of container media. Pump water off the bottom valve check valve also belongs to class.The function of the relief valve is to prevent the medium pressure in the pipeline or device from exceeding the required value so as to achieve the purpose of safety protection.Control valve, throttle valve and pressure reducing valve, its role is to regulate the media pressure, flow and other parameters.(2) vacuum type: such as vacuum ball valve, vacuum flapper valve, vacuum air charging valve, pneumatic vacuum valve, etc.. Its function is to change the direction of the air flow in the vacuum system, adjust the air flow rate, cut off or connect the vacuum system of the pipeline, and the component is called the vacuum valve.(3) special uses such as pigging valves, vent valves, drain valves, exhaust valves, filters, etc.. The exhaust valve is an essential auxiliary component in the pipeline system. It is widely used in boilers, air conditioners, petroleum, natural gas, water supply and drainage pipelines. Often installed in the commanding heights or elbows, etc., to exclude excess gas pipeline, pipe road to improve the use of efficiency and reduce energy consumption.
Q:What is the difference between a stop valve (a power station valve) and other valves?
Power station cutoff valve advantages editor1., the fluid resistance is small, and the coefficient of resistance is the same length as the pipe section.2., simple structure, small size, light weight.3., reliable and reliable, the current gate valve sealing surface materials widely used plastic, good sealing, vacuum system has also been widely used.4 easy operation, open and close rapidly, from fully open to fully closed as long as 90 degree rotation, facilitate remote control.5., easy maintenance, simple valve structure, sealing ring is generally active, disassembly and replacement are more convenient.6. in full open or full closed, the ball and valve seat sealing surface and dielectric isolation, the media through, it will not cause erosion of the valve sealing surface.7., a wide range of applications, from small diameter to a few millimeters, large to several meters, from high vacuum, high pressure can be applied.
Q:What does the 4 point valve mean?
The caliber is DN15's valve. What valves do you need?
Q:What does the valve specification "3/4CL150" mean?
Size: DN20 pressure rating: 150 pounds American Standard

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range