Valve with Competitive Price from Valve Manufacturer on Hot Sale in the World

Ref Price:
Loading Port:
Tianjin
Payment Terms:
TT OR LC
Min Order Qty:
100 pc
Supply Capability:
10000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

 

1.Structure of Gate Valve Description

A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. For extremely thick fluids, a specialty valve often known as a knife valve is used to cut through the liquid. On opening the gate valve, the flow path is enlarged in a highly nonlinear manner with respect to percent of opening. This means that flow rate does not change evenly with stem travel. Also, a partially open gate disk tends to vibrate from the fluid flow. Most of the flow change occurs near shutoff with a relatively high fluid velocity causing disk and seat wear and eventual leakage if used to regulate flow. Typical gate valves are designed to be fully opened or closed.When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.

 2. Main Features of the Gate Valve

• Valve body cavity using non-toxic epoxy resin,both inside and outside flashboard completely is coated with rubber

•  Free of water pollution

• High manufacturing accuracy

• High strength

• Environmental protection and energy saving

• Good visual effect

3. Images

 

Valve with Competitive Price from Valve Manufacturer  on Hot Sale in the World

Valve with Competitive Price from Valve Manufacturer  on Hot Sale in the World

4. Gate valve Specification

 Valve with Competitive Price from Valve Manufacturer  on Hot Sale in the World

5.FAQ

1. What's are the characteristics of gate valve?

The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar, so gate valves are often used when a straight-line flow of fluid and minimum restriction is desired. The gate faces can form a wedge shape or they can be parallel. 

2. What is the work principle of gate valve

 The gate faces can form a wedge shape or they can be parallel. Gate valves are primarily used to permit or prevent the flow of liquids, but typical gate valves shouldn't be used for regulating flow, unless they are specifically designed for that purpose. Because of their ability to cut through liquids, gate valves are often used in the petroleum industry. 

3.  What is the structure?

Bonnets provide leakproof closure for the valve body. Gate valves may have a screw-in, union, or bolted bonnet. Screw-in bonnet is the simplest, offering a durable, pressure-tight seal. Union bonnet is suitable for applications requiring frequent inspection and cleaning. It also gives the body added strength. Bolted bonnet is used for larger valves and higher pressure applications.

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:Why can't the clip type check valve be directly connected with the pipe mouth or other valves?
The clip type check valve is made up of two discs to prevent backflow.If the clip check valve is connected to the other valve, the disc may touch the valve and cause the check valve not to be fully opened or closed. This is a preliminary analysis of "enter the valve", for reference only!
Q:What's the material of j41h-16p's valve?
The j41h-16p valve is a stainless steel globe valve.The working principle of stop valve:The cut-off valve, also called the door, is the most widely used as a valve, it is popular is because the process of opening and closing the sealing surface friction between the small, more durable, highly open small, easy manufacture, convenient maintenance, not only for low pressure, but also suitable for high pressure.The closing principle of the valve is to rely on the valve bar pressure, so that the valve sealing surface and seat sealing surface close together, to prevent the circulation of media.The one-way valve can only medium flow direction when installing. The structure length of the stop valve is larger than that of the gate valve, and the fluid resistance is large, and the reliability of the sealing is not strong during the long-term operation.
Q:Where is the hydrant main valve?
There is a gate valve at the elbow below the hydrant
Q:Heating pipes, in addition to the living room,
It is loaded against the supply and return water pipe is not underground do in next time if it is to see if there is any water on the side of the baffle remember from the baffle recently if it is normal that is motivated next must put off the baffle
Q:Is the filter also valve?
Filters are generally used in the pipeline, are ancillary products, strictly divided, it does not belong to the valve category
Q:What is the valve?
valveDefinition of scientific and technical termsValveEnglish Name: valvevalveValve is a control component in the fluid delivery system. It has the functions of closing, adjusting, guiding, preventing reverse flow, stabilizing voltage, shunting or overflow and releasing pressure. Valves used in fluid control systems, from the simplest stop valve to a very complex automatic control system used in a variety of valves, a wide range of varieties and specifications. Valves can be used to control air, water, steam, a variety of corrosive media, mud, oil, liquid metal and radioactive media and other types of fluid flow.Definition 1: a device used to control flow in a pipe.Subject: electricity (first level discipline); hydraulic construction (two disciplines)Definition 2: equipment installed in a pressure pipe to control the flow of water.Subject: Water Conservancy Science and Technology (first level discipline); hydraulic construction (two disciplines); gate and hoist (three disciplines)Valve historyThe valve is produced with the flow of the pipe. Human valves have been used for nearly 4000 years. In ancient China from the brine well absorb salt brine, once in a bamboo pipe used in cork valve. In the 1800 BC, the ancient Egyptians used similar wooden cocks to control the distribution of water to build large water conservancy projects to prevent the Nile from overflowing. These are the embryonic form of the valve. The extensive use of industrial valves began only after Watt invented the steam engine. In the early twentieth Century, there were valves of cast steel, wrought steel and forged welded joints.
Q:Which valves are used in the power station?
Power gate valve, also known as power station valve, is mainly used in various pipelines of fire power plants, cutting off or connecting pipeline medium.Applicable medium: non corrosive media such as water and steam. Compared with other valve products, the valve is characterized by high temperature and high pressure and unique self sealing design. The higher the pressure, the more reliable the seal is. Because of its performance, technical characteristics and special working conditions, the products can not be replaced by other products.Compared with other valve products, the gate valve of the power station is characterized by high temperature and high pressure. If only the pressure is lower than that of the universal valve, the temperature is lower than that of the general valve. Because of its performance, technical characteristics and special working conditions, the products can not be replaced by other products.
Q:Mechanical valve
Tiemuyu666, let's go inside and see if there's anything we need. For reference only
Q:Proportional valve why than other small pipeline valves
3.8 valveGraphical representation of numbers, names, symbols3.8.1 angle valve at room temperature3.8.2 cold angle valve for low temperature use3.8.3 stop valve at room temperature3.8.4 ball valve often 9 temperature3.8.5 valve at room temperature3.8.6 butterfly valve at room temperature3.8.7 check valve flow from blank triangle to non empty triangle3.8.8 pressure reducing valve, small triangle for high voltage end3.8.9 throttling valve is needle valve3.8.10 three-way valve for normal temperature use3.8.11 four way valve used at normal temperature3.8.12 safety valve spring type safety valve3.8.13 trap actual drawing, you do not have to draw arrows3.8.14 inflator, cold box, little gas huff and puff, safe useValve for normal temperature of regeneration valve of 3.8.15 reverse stop valve3.8.16 reverse loading cold angle valve
Q:Which valve can play a good regulatory role?
A wide range of valves, the function is different, although like conventional butterfly valve, ball valve can play a regulatory role, but their role is not linear, so if you need to adjust the precision of the valve, it is best to select the control valve.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range