Q:Butterfly valve D71X-1.6C, DN50, there is no difference between C and no C? What do you mean by "concrete"?

The C indicates that the material is carbon steel and does not indicate cast iron (generally omitted)

Q:19 years ago i had a valve repair and now im due to have heart valve replacement. I heard that the metal valve make noise has anyone who has had the metal valve have this type f problem or any other problem with the metal valve it would be a great help if anyone could answer

tissue valve is better because you will need long term warfarin with metal one. metal ones have other drawbacks like amaemia too

Q:How can the flange butterfly valve be installed on the pipe?

Outlet pipe configuration.If in the pipeline, the valve in order to do not bear the direction of the force and bending moment, it is best to set the valve at the exit side of the expansion joint. Valve opening and closing valve water pressure should not be borne by the foot, but through the valve flange, by the pipeline to bear as well.Butterfly valve structure is generally shorter length, and its butterfly plate will be extended to adjacent pipes or other parts, so be careful not to collide with other parts and interference. And to prevent the error matching pipe diameter greater than C and collide with the butterfly plate.Butterfly valve as a regulator, just adjust the flow and pressure. The valve is regulated by loss of pressure.

Q:What kinds of butterfly valves are available? What is the working principle of butterfly valves?

According to the form of sealing:(1) forced sealing butterfly valve.1) elastic sealing butterfly valve. The pressure of the valve seat, seat, or plate is produced when the seal is closed by the pressure from the valve.2) additional torque seal butterfly valve. The seal is produced by a torque that is applied to the valve shaft.(2) pressure sealed butterfly valve. The pressure is greater than the pressure on the seat or plate.(3) automatic sealing butterfly valve. The pressure of the seal is automatically generated by the pressure of the medium.Divided by work pressure:(1) vacuum butterfly valve. Working pressure is lower than the standard atmospheric pressure butterfly valve.(2) low pressure butterfly valve. Butterfly valve with nominal pressure PN<1.6MPa.(3) medium pressure butterfly valve. Butterfly valve with nominal pressure PN 2.5--6.4MPa.(4) high pressure butterfly valve. Nominal pressure PN is 10. 0--80.0MPa butterfly valve.(5) ultra high pressure butterfly valve. Butterfly valve with nominal pressure PN>100MPa.

Q:Check valve; flexible joint `; installation order of electric butterfly valve

Connect the Songjiang rubber joint from the pump outlet. Check the 1 valve

Q:What do D71, D371 and D341 represent in butterfly valves?

D71 in D is the meaning of butterfly valve, 7 refers to the connection is the clamp, and 1 refers to the butterfly plate is the center of verticalD371 in D is the meaning of butterfly valve, 3 refers to the drive mode is the turbine, 7 refers to the connection is the clamp, and 1 refers to the butterfly plate is the center of verticalD341 in D is the meaning of butterfly valve, 3 refers to the drive is turbine, 4 refers to the connection is flange connection, and 1 refers to the butterfly plate is the center of vertical. China valve Holding Group Co., Ltd. Zhang Chao 021-55601036 Fax: 021-66289822

Q:When i waa replacing the valves in the las 4 valves , they dropped and i dont know how to make them go back up, and i dont want to take the engine out of the car, is there any tool to make the valve go back up or there is any way to do it?? People told me that i can crank it by and , but i dont know how to do it where do i have to do it, i need help please im begging for help!

Engine dis-assembly is now required .

Q:How big is the butterfly valve with a diameter of 80?

80 caliber butterfly valveAskIn practice, this is not the case. Why not use it when I use it?. However, I used 65 butterfly valves, right? WhyChasing the answerWhat's the thickness of your pipe?

Q:Who was the first doctor to discover Pulmonary Valve Stenosis? Also, who was the first doctor to perform surgery for it? Please and thank you for your help.P.S. I have this condition.

1761 - Pulmonary valvar or valvular stenosis is one of the more common forms of congenital heart malformations and it has been extensively studied since the original description of pulmonary valve stenosis by John Baptist Morgagni in 1761. 1888 - Tetralogy of Fallot, first characterized by Dr.Etienne Fallot in 1888, is present in about 3000 children born each year in the United States. It is a combination of four heart abnormalities. Dodrill and his colleagues employed it with success for the open correction of a stenotic pulmonary valve in October 1952.

Q:What does "C" in D971F-16C DN450 RF mean for electric butterfly valves?

C represents the valve body and the material is cast steel;D stands for butterfly valve; 9 stands for electric; 7 stands for clip type; 1 represents middle line butterfly valve; 16 stands for nominal pressure 1.6Mpa; RF stands for flange joint; in the form of protruding surface.