"U" type flanged butterfly valve DN40-DN1800
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10000 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Technical Date:
Size: DN40-DN1800
Nominal Pressure: PN10/PN16
Operation Temperature: -10°C~150°C
Suitable Medium: Water,Sewage,Seawater,Gas,Food,Oils,etc.
2. Standard
Design Standard: GB/T 12238-2008
Structural Length: GB/T 12221-2005
Top Flange dimensions: ISO5211
Face to face dimensions: GB9112,DIN2501,BS4504,ISO2084,ANSI125
Type of connection:Flanged /Wafer
3. Feature:
This valve is mainly composed of body, butterfly plate, valve shaft, seat and transmission devices. Simple and compact structure, small portable, convenient for transport, install and dismantle. 90 degrees of opening and closing, switch quickly, operating is small, light energy; Sealing performance is good, service life is long, can achieve zero leakages. Flow curve tending to straight line, excellent regulation performance.
The length and the same wafer butterfly butterfly valve structure. Installation can be installed to the clamp, also can be installed through the flange on both ends.
4. Sealability:
The valve for rubber seal, closing butterfly plate and seat sealing performance is good, two-way sealed good performance and the torque is small. the friction is very small between butterfly plate and the seat seal. The valve shaft drive the butterfly plate, butterfly plate do 90 degrees rotation. Butterfly plate flexible for opening and closing, no card acerbity, beating phenomenon, small torque.
- Q:Specifically an engine valve retainer.
- TRhe retainer and locks works together to hold valve to spring and keep valve from falling into the cylinder and spring from coming off the top. The locks are tappered, small end at bottom, big end at top. You compress the spring down, drop retainer over valve, put locks in groove of valve stem and pull up on the retainer to lock the retainer and locks in place, the relese the pressure off your spring compressor and the valve spring now holds pressure up on retainer which forces up on the big end of locks and holds everything together
- Q:Can the inlet and outlet of butterfly valve be reversed? Why? What will happen if the reverse gear is installed?
- Hard seal butterfly valve in any case, the reverse loading will cause tight seal.
- Q:Check valve; flexible joint `; installation order of electric butterfly valve
- The flexible rubber pipe joint is first, then the check valve, the electric butterfly valve and the gate valve.
- Q:oil coming from valve into turbo charger
- Diesels do not have pcv valves. Pcv valve are on gas engines only.
- Q:I got my timing belt done on a 1999 Civic Si on September 26 @ 113,699 miles. at 116,9xx miles I bent a valve on my third cylinder. How likely is it that the timing belt is the reason why this happened? I heard that if the timing belt is a tooth or so off, it could bend a valve. So is it likely that this could have happened? Anyway to check?
- COMPRESSION TEST OR CHECK ALL TIMING MARKS TO SEE IF THEY ARE IN ORDER
- Q:Today saw the butterfly valve and butterfly valve, I do not know what is the difference between the two
- Butterfly valve is clear that the butterfly, because it is so called as valve plate, butterfly valve.
- Q:How does PLC control butterfly valves?
- PLC output signal, access to the butterfly valve actuator or locator, you can control
- Q:What are the functions and uses of butterfly valves?
- Industrial butterfly valve features, capable of high temperature, applicable pressure range is higher, the valve nominal diameter is large, the valve made of carbon steel, the valve plate sealing ring using metal rings instead of rubber rings. Large high temperature butterfly valve welded by steel plate, mainly used for high temperature smoke duct and gas pipe.Construction: mainly composed of valve body, valve stem, disc and sealing ring. The valve body is cylindrical and has short axial length and is internally provided with a plate.
- Q:What type of butterfly valves do you have in DN125?
- The butterfly type according to the usage, and there are many kinds of driving modes, different means, generally expressed as follows: Butterfly symbol: D; 1, drive mode: 0: 1: electromagnetic solenoid valve; hydraulic; electro hydraulic; 2: 3: 4: worm gear; spur gear 5: bevel gear;; pneumatic; 6: 7: 8: gas - Hydraulic; hydraulic; 9: Electric; handle, handwheel: no code. Connection: 2, valve is generally only two, 4: 7: flange type; clamp; 3, butterfly valve structure code: divided into sealed and non sealed type two; seal type: 0: 1: single eccentric; vertical center; 2: 3: three double eccentricity; eccentricity; 4: linkage; sealing type: 5: 6: single eccentric; vertical center; 7: 8: three double eccentricity; eccentricity; linkage mechanism: 9. 4, the sealing material: This lot, watch some kinds of H:Cr13 stainless steel; lining; J: S: X: plastic; rubber; for example: D971X: refers to the electric clamp center vertical plate rubber sealing butterfly valve.
- Q:How can I get the fire signal butterfly valve?
- Look at the instructions! Will not pick up the sales representative to come to guide!
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
"U" type flanged butterfly valve DN40-DN1800
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 10000 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords