Detailed Product Description
1.Two-row micro guideway
3.Guideay Length: from 40mm to 1600mm
4.Height Size:from 10-30mm
Features for KM Linear Guideway
1.KM linear guideway is designed to meet the tendency of the modern machinery’s high precision and high performance; when in designing, it then highlighted n high precision, high loading ,high reliability and excellent motion principles; and the tidy physical design makes KM linear guideway move smoothly and install easily.
2.Compared with the old sliding guideway, KM linear guideway has lower friction factors; by adopting the steel ball bearings, the friction factor is reduced to 1/20 to 1/40 of the former’s; at the same time, coordinate with its characteristics of high rigidity and precise procedure, KM linear guideway features on smooth moving, low noise ,easy installation ,dust prevention, high loading, high rigidity and so on; moreover, it can also achieve the requirement of high precision.
3.We can produce kinds of special guide rail sets for machine tools and some customized objects according to the customer’s drawings and some special requirement. Welcome to contact us at any time, Thanks!
- Q:Are linear guides made of stainless steel?
- The micro guide rail of SBC is made of stainless steel
- Q:What are the good brands in Germany of linear guide and screw?
- Upstairs is quite right. Imported brands are mainly Japanese and german.
- Q:Does the elevator use fuel rail?
- Rail fuel consumption is seasonal, summer high temperature, high oil temperature will rise, oil temperature is high, so some viscosity is very low, it means the thin oil, the oil cup felt much more special, so special oil fee! Thin oil can be seen from the pit can be connected with the oil box, oil box oil may be the cause of dilute oil.In winter the temperature is low and the oil temperature is low, so the oil viscosity is very high. Oil saving in comparison!Therefore, the consumption of oil is mainly caused by the low consistency of the oil. But there are other reasons, such as the cup felt tightness, pine oil suction quickly, then slowly suck tight. Elevator workload!But not only for saving oil and gas saving, but also to learn how to use oil skills. So as to achieve the purpose of fuel-efficient, and the normal operation of the elevator use.Method is as follows: winter oil more concentrated, low oil temperature. The elevator may run because the oil viscosity leads to the increase of the friction between the guide shoe and the guide rail, and the elevator runs with noise and poor sense of comfort. Therefore, winter use oil thin slideway oil.Summer oil is relatively thin, high oil temperature. Sometimes, linoleum can not touch the guide rail, the oil does not take the guide rail, it will streamer. And oil consumption is particularly large, almost every day refueling. Can not keep up with refueling, then there is a big lift in the middle of the sound, due to lack of oil caused. Therefore, the summer selection of a more thick oil.Only in this way can the elevator feel comfortable and fuel efficient!This is some of my personal experience, and I hope to be able to help you!
- Q:Which kind of slideway is good for engraving machine?
- A square ruler chosen for silver
- Q:What about Mobil 68 guide oil?
- Used 68 of other brands, but also good, but also to see what you use in products, and some products only need 46 number on it.
- Q:What are the styles of American style furniture, wooden guide rail or metal guide rail?
- American furniture traditional practices are wooden rails, wooden slide relatively durable! Personally compared love wooden rails, our furniture is in the Taobao garden lattice furniture to buy, then specially illustrate the need to use wooden rails. Oh, affordable, very love!
- Q:What hydraulic oil is used in the NC machining center guide?
- With professional rail oil, some sell hydraulic oil without hydraulic oil, which is used by hydraulic station.
- Q:How can the dovetail guide be fixed on the case?
- With the servo motor, the motor is locked, then guide the tightening. If you are stationary, place a few screws on the side and press the adjusting block. If you want to move, you have to add a mechanism...
- Q:What does the DIN- rail installation mean?
- The guide rail type installation ammeter adopts the modular design, and has the advantages of small size, easy installation, easy networking, etc., and is easy to realize the terminal lighting electric energy metering, and is convenient for retrofitting the lighting system with an electric meter. The meter uses LCD display to measure electric energy and other electrical parameters. It can set parameters such as clock, rate and time interval, and has the function of energy pulse output. RS485 communication interface can be used to exchange data with the host computer. Rail mounting electric energy meter has the advantages of small size, high precision, good reliability, convenient installation, performance indicators in line with national standard GB/T17215, GB/T17883 and DL/T614 electric power industry standard requirements for the technology of electric energy meter, applicable to government agencies and large public buildings in the sub metering of electric energy, but also can be used for enterprises and institutions for energy management assessment.
- Q:Method for processing and installing linear guide rail
- Your rail installation is not correct, huh? Screw hole assembly, fitter, have nothing to do with it. If you don't even have a baseline, it's a waste of the linear guide. This is not the most important relationship with the screw hole position. It is important to install the mounting surface of the linear guide rail. The bottom of the rail must be machined with straightness, and then a side must have a datum plane, which can be used as a benchmark for either the inside or the outside of the two rail. The machining must be done directly with a planer and a guide rail. When installing, tighten the screw slightly first, then the other side of the benchmark is compressed with several wedges, which may be troublesome if you use a shelf with a head screw. The guide block connected with the upper slide plate also has the same positioning principle, but only one rail, the slider above needs to be positioned (Ji Zhun), and the other side can not be positioned. If the accuracy requirements are high, you must also use the wire table to adjust the screws on the guide rail one by one.
We believe in the purchasing policy of "try our best to bring your cost down". If you plan to purchase goods to reduce your cost, please let us have a chance to quote at your needs. We are capable of providing you with a profitable proposal with assurance.Hope we can build long-term and good business relationship.
1. Manufacturer Overview
|Annual Output Value
||US$5 Million - US$10 Million
||North America 9.41
South America 5.88%
Eastern Europe 10.59%
Southeast Asia 4.29%
Mid East 4.88%
Eastern Asia 5.12%
Western Europe 8.24%
Central America 5.06%
Northern Europe 12.94%
Southern Europe 7.94%
South Asia 10.18%
Domestic Market 3.53%
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||61% - 70%
|No.of Employees in Trade Department
||Above 50 People
||English, Chinese, Spanish, Russian
||Below 1,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered
|Product Price Range
||High and/or Average