Five-segment U section boom
Single cylinder luffing and double-winch
Manual mechanical control
Spacious and luxury streamline cab
U boom system
Constantly optimize the boom section, completely releasing the carrying capacity of the plates, which makes the lifting more reliable and safer.
Compact boom head
Extend the jib length, which can extend the working radius to the most.
The pipeline adopts high-precision cold drawing steel pipe, matching with the cutting ferrule, which is good looking and easy to maintain.
It has large space and wide views. The control levers and instrument buttons are at hand.
The colorful LCD display of the torque limiter can shows all the important operating information.
Reasonable matching, energy efficiency and environmental protection, and strong power meet the economical running of the required power.
|Weight|| || |
|Total weight in travel||kg||36930|
|Front axle load||kg||12330|
|Rear axle load||kg||24600|
|Power|| || |
|Engine rated power||kW/(r/min)||235 / 2200|
|Engine rated torque||N.m/(r/min)||1250 / 1400|
|Travel|| || |
|Max. travel speed||km/h||75|
|Min. turning diameter||m||19.5|
|Min. ground clearance||mm||260|
|Max. grade ability||%||40|
|Fuel consumption for 100km||L||30|
|Main performance|| || |
|Max. rated total lifting capacity||t||35|
|Min. rated working radius||mm||3000|
|Turning radius at turntable tail||m||3.055|
|Max. lifting torque||kN.m||1200|
|Fully extended boom||m||39.6|
|Fully extended boom+ jib||m||54.6|
|Longitudinal outrigger span||m||5.35|
|Lateral outrigger span||m||6|
|Working speed|| || |
|Boom luffing time||s||68|
|Boom full extension time||s||≤155|
|Max. swing speed||r/min||≥2.5|
|Max. speed of main winch (single rope)||m/min||≥130|
|Max. speed of aux. winch (single rope)||m/min||≥130|
- Q:Mechanical design, manufacture and automation
- Mining machinery mainly for mining machinery and equipment for training, staff should belong to the branch of construction machinery. Water conservancy machinery for water conservancy machinery and equipment training personnel, should belong to the branch of construction machinery.
- Q:What do I learn about hydraulic systems, engineering machines or steel mills?
- The steel mill uses hydraulic system design not many, basically is maintains. Occasionally with some selection, transformation, etc., but also with other hydraulic equipment company together.
- Q:Japan famous construction machinery and electric company
- Engineering machinery: Komatsu construction machine, Hitachi, Kobelco, and Yanmar, Sumitomo, ah, ah, a lot of Electric: Hitachi, Matsushita, SONY, Toshiba
- Q:What axis is the mechanical keyboard better?
- Black shaft straight up and down, is recognized as the game machine keyboard choice. Black shaft mechanical keyboard will bring feeling to play fully and delightfully. Of course, the black axis can also be used to type, but the black axis trigger keys are short, the pressure grams are large, and the fingers are too small, typing with them may be a bit tired for a long time. The single axis shaft mechanical keyboard has a service life of 50 million times (other mechanical keyboard is 20 million times).
- Q:What mechanical keyboard is better for playing lol?
- In the early days of the keyboard, mechanical keyboards appeared, and had experienced a period of prosperity, such as the mechanical keyboard that was installed on earlier servers. Followed quickly by the high quality and inexpensive film keyboard replaced mechanical keyboard but did not disappear, as the representative of high-end products to today, the characteristic of mechanical keyboard itself is not flooded, so when the mechanical keyboard has experienced prosperity and decline
- Q:What about mechanical and electrical engineering? Employment direction? Employment prospects?
- Can do mechanical design, equipment maintenance, process design, but also can do partial electricity control work. Learn this never worried about jobs, is the starting point of undergraduate out a little low, salary of 211 words in general about 3000, but with the growth of experience, will have a greater appreciation, if you have more than 5 years work experience that is a meat and potatoes, in a word, not to eat young rice to live. I am mechanical and electrical, I feel satisfied, forget to adopt ~!
- Q:What are the total cost of the project?
- Indirect costs (including fees and charges. Engineering engineering scale of fees. The social security fee. The housing provident fund. The dangerous work accident insurance) and enterprise management fees (management personnel wages. Office expenses. Travel and transportation fees. Fixed asset use fee. Instrument use fee labor insurance premium. The employee education expenses. Union funds. Property insurance. Financial expenses. Other taxes.)
- Q:Other Xuzhou Construction Machellonery Group Inc related
- Learned from the Xugong Group, Xugong Group in 2010 operating income exceeded 66 billion yuan, an increase of more than 30%, to achieve profit growth of more than 50%, to achieve a sound and rapid development of the construction machinery industry, keep the leading position for 22 consecutive years.
- Q:Can the construction machinery mortgage?
- Product features (1) expanded the scope of the pledge collateral, and solved the problem of insufficient guarantee for the production of small and medium-sized enterprises. (2) invigorated the fixed assets of enterprises and widened the financing channels for enterprises. (3) the scope of accepting collateral equipment is wide and suitable for different types of production small and medium-sized enterprises.
- Q:What's the difference between an automatic watch and a mechanical watch?
- Manual mechanical watch, hand chain movement, through the rotation of the watch's head, the watch movement in the main spring full string, through the spring fully push the gear operation, push the pointer to leave. Automatic mechanical watches, automatic power chain movement is to rely on the movement within the pendulum weight driven, when wearing the watch will drive the pendulum swing arm to rotate, and drives the table as the mainspring watch chain, push away
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range