Truck and Bus Radial Tyre 295-75R22.5 ECO36

Ref Price:
Loading Port:
Qingdao
Payment Terms:
TT OR LC
Min Order Qty:
240 pc
Supply Capability:
20000 pc/month

OKorder Service Pledge

Quality Product

Order On-line Tracking

Timely Delivery

OKorder Service Pledge

Credit Rating

Credit Services

Credit Purchasing

Share to:

Product Description:

1,Pattern of Truck and Bus Radial Tyre Description:

The suitable for all wheel of middle an long distance vehicle on good road conditions.Unique deepened and widened pattrn progides strong driving force and good breaking performance.

 

Optimized and reinforce tyre bead design.Long distance and high speed pattern got strong driving stability and good eccentric wear resistance.

 

Tyre shoulder groove design ensure the good heat dissipation.First for good road and highway in long distance usd.

 

2,Main Features of the Tyre:

 

Long distance vehicle

 

Good breaking performance

 

Strong driving force

 

Reinforce tyre bead

 

 

3,Truck and Bus Tyre Images:

 

Truck and Bus Radial Tyre 295-75R22.5  ECO36

 

Truck and Bus Radial Tyre 295-75R22.5  ECO36

Truck and Bus Radial Tyre 295-75R22.5  ECO36

Truck and Bus Radial Tyre 295-75R22.5  ECO36

 

 

4,Truck and Bus Tyre Specification:

 

Truck and Bus Radial Tyre 295-75R22.5  ECO36

 

 

5,FAQ:

 

We have organized several common questions for our clients,may help you sincerely:

 

1,How to guarantee the quality of the products

We will give clients compensition if the tyre has manufacture defect.Clients just provide tyre NO.and some pictures.

 

2,How long can we receive the product after purchase?

 

It up to sizes you order.We can delivery immediately if the size is available.About 30 days after receiving down payment if it should be arrange production.

 

3,How to get the sole agent?

 

It up to the market.It should be 3-4 containers per month is small market ,like UAE.But 15-20 containers are requested if you from USA market.

 

 

 

 

 

Send a message to us:

Remaining: 4000 characters

- Self introduction

- Required specifications

- Inquire about price/MOQ

Q:How many kilometers can the lorry tire be scrapped properly?
Severe wearEach tire tread groove has an identification of the wear limit, which is about 2mm thick. It is recommended that the tyre thickness be worn to the limit 4mm, that is, when the distance is about 6mm of the groove, it should be replaced.Severe agingObserve the tire tread and the tread on the tire wall. If there is a common crack, it shows that the tire has been aging seriously. At this point, although the mileage is not long or the use of time is not long, but still need to change in time. Otherwise, the aging tires due to the strength of the tire wall weakened, in high speed driving due to temperature rise, prone to blowout risk.
Q:How are the tires classified
The general characteristics of tire cord fabric layer and buffer layer is adjacent cord cross arrangement, each layer of cord and crown center line into the 350~400 angle, and is called tire. The cushion layer is between the ply and the tread.The ply of a radial tire is arranged at 90 degrees or near 90 degrees across the center line of the tread, and the cord is distributed like the meridian of the earth, hence the radial tire. Between the ply and tread is a band of plies. The angle between the ply cord and the center line of the tread is 10 degrees -20 degrees.
Q:What tools do you need to fill the tires?
The fire is the most traditional repair measures, because the tire manufacturing process and tyre repair technology, fire up has been rarely seen. The same fire up to remove the tire, and then the rubber chip dedicated attached to the wound, the wound with baking baking machine, not completely fit the film and tire. The benefits of fire repair is very durable, but the maintenance technology requirements are high, and bad will damage the tires, now the car tire repair has been very little use.Although the tire economy, but not all things can be repaired, such as tire wall appeared more than 1 cm wound, or crown was reinforced and other objects pierced, resulting in a large loophole, or to replace the new tires, can not give up the safety of emphasizing economic.
Q:How to identify the specifications of car tires?
The speed rating indicates the maximum speed at which the tyre carries the specified load under specified conditions.The commonly used speed rating: Q 160 km / h V 240 km / h R 170 km / h W 270 km / h S 180 km / h Y 300 km / h T 190 km / h H 210 km / h Z ZR faster than 240 km / hour, if there is ZR, such as P275/40ZR17 93W, then the highest speed rating ("93W" in "W") is 270 km / h.
Q:The tires are different. Do you have anything to do?
It's OK. It's still balanced in theory. If you have four wheels with three models, the other is different, and that might be a problem. Below also provides some tire maintenance knowledge, hoped to be useful to you...... 1. note that the tire pressure should not be too much air into the tire, because may be unable to withstand the pressure of excessive expansion and burst danger in the high-speed operation, so it should be in accordance with the standard pressure required to maintain tire manufacturers, including spare tire pressure. 2. tire pressure can be measured by a tire pressure gauge, but must be measured at the normal temperature of the tire, as the result is inaccurate in the hot tire condition. 3., the timing of the exchange position, every 10 thousand kilometers of the tire should be interchangeable position, because the general motors in front of the engine, the front axle and the rear axle load distribution is not the same, so the front wheel tires larger wear. The best way to mitigate this is to change positions. 4. regular balance check, regular inspection balance, not only can extend the tire life, but also improve the stability of the car when driving.
Q:What is the thickness of the front tire crown of a car?
The tyre can be divided into two kinds of radial tire and bias tyre according to the arrangement of the tire inner ply and buffer layer. Radial tyres are commonly used on automobiles. The sides of the tyre are marked.
Q:When the temperature of the tire, the tire will burst
Tire usually consists of three causes: insufficient air pressure, excessive pressure or tire suddenly punctured or crashing. From what you have described: the biggest possible result is a flat tire caused by a lack of air pressure. Because of the lack of gas pressure caused by insufficient driving tire rim flange in continuous rolling tire crown and shoulder joint, leading to the crown and shoulder from causing a puncture. The possible causes of insufficient air pressure include insufficient inflation, air leakage, pinning, repair, and so on.Summer traffic accidents happen frequently, mostly because of automobile tire burst. A flat tire caused by many reasons, summer temperatures cause the rubber aging, tread wear, tire pressure is too high or too low, the sharp punctured tire pavement, so the owners should pay special attention to the tire condition, as far as possible to prevent the occurrence of burst event.In addition, high temperature summer driving the accelerated aging of rubber tyre wear, strength of steel layer decreased gradually, at this time should be timely replacement tires, otherwise the rain and the steering of the vehicle brake system failure, causing traffic accidents. General tire tread gounei raised tire wear to the marker, distance between the marker 1.6mm, the owner of the tyres on the tip.
Q:What does "lt" mean?
According to the different structure and structure, the pneumatic tire is divided into two kinds: inner tube tyre and tubeless tyre. Tubeless tires are widely used in cars. The tyre can be divided into two kinds of radial tire and bias tyre according to the arrangement of the tire inner ply and buffer layer.Radial tyres are commonly used on automobiles. The sides of the tyre are marked.
Q:Can I have two cars on the tyres?
[principles of tyre change]1. the same specifications, different specifications of the tire, its inflated outside diameter and cross-section width is not the same, mounted on the same axle, the load distribution is not the same.2. the structure of the same tread factor is different from that of the tread and skew, and its cushioning property and circumferential deformation are different. Two kinds of tire installed on the same shaft, the bearing load must not wear, are not the same.3. material same material mainly refers to the carcass cord material. For example, there are great differences of all steel radial tire and radial tire carcass thickness, fiber cord strength, thermal performance, mixed together effect.The 4. level is the same level of tire load level, at the same time to determine the pressure of the corresponding standards, the load capacity of different tire mixed together, the gas pressure is not uniform, the deformation of the tyre is also different.5. the same tire tread pattern is different, not only wear a difference, and the adhesion of the ground is not the same, the car around the tire tread is not consistent, will affect the vehicle ride comfort, emergency braking will be unilateral and tail phenomenon.6., the same brand, manufacturers are different, tire hub size, tread width, pattern shape, cord material are certain differences. Different brands of tires mixed together will affect the use effect.
Q:Is the size of the car as big as possible?
If the tread width of the same tread pattern is wider, it usually brings better grip, but the fuel consumption and tire noise are also likely to increase.The smaller the height to width ratio (the more flat tires), the better the vehicle handling, but the comfort may drop and the chances of bulging when a tyre hits a foreign object can increase.When the tire is wider, will it be able to turn freely in its original position, and other components that do not scratch the vehicle will depend on the specific vehicle. To be on the safe side, you need to have a field test.

1. Manufacturer Overview

Location
Year Established
Annual Output Value
Main Markets
Company Certifications

2. Manufacturer Certificates

a) Certification Name  
Range  
Reference  
Validity Period  

3. Manufacturer Capability

a)Trade Capacity  
Nearest Port
Export Percentage
No.of Employees in Trade Department
Language Spoken:
b)Factory Information  
Factory Size:
No. of Production Lines
Contract Manufacturing
Product Price Range