Along with over six decades of quality customer service, it is also involved in numerous organizations that further the betterment of cable tray production and installation.
It's commitment to the bettering of the cable tray and wire management industry is tribute to their long-standing reputation as one of the industry leaders in quality and customer service.
1.Perforated Cable Tray Systems.
2. Cable Ladder systems.
3.Cable Trunking Systems.
4.GRP/FRP Cable Tray Systems.
5.Wire Mesh Cable Tray Systems.
6.Aluminum Cable Tray Systems.
7.Wire Way Systems.
8.Strut Channel Systems.
- Q:How to do the separation of the switch and the socket
- Its root cause, may be hard disk energy consumption is too high, or hard disk box design is unreasonable, or hard disk box using a high energy consumption of the chip It is also possible that you are using a USB extension cable, or you can use multiple USB devices at the same time, resulting in insufficient USB power Replace the USB hard disk box or switch to a low-speed hard disk; use a dual USB plug-powered USB hard disk box; do not use USB extension cable, USB device should be inserted in the back of the machine USB interface to avoid signal attenuation; do not use multiple USB devices , The general can solve the problem
- Q:Wired wire is not long enough to use another connection together will affect the signal transmission?
- Low voltage power cable telemetry insulation resistance, should use 500 volt shake table
- Q:What is the price of cable 3 * 2.5 + 1?
- Positive pole connected to the engine negative pole of the car beam or the engine any one place
- Q:How the bridge slot is connected to the ladder
- Changhong TV picture-in-picture function in the remote control has a picture-in-picture dedicated button area, this area a total of eight buttons, picture in the picture to cancel the key in the CH- on the right, in the picture in the state and then click the button Is to cancel the picture in the picture.
- Q:How much length does the USB extension line have to add power?
- General power supply line leakage, in most cases refers to the line of fire (phase) on the earth leakage. Slight leakage sometimes do not trip or fuse blown, and sometimes people touch the leakage will have Maai feel! You can first use the measuring pen to measure the line of fire (phase) to disconnect the total power, and then all the load all cut (unplug the power), with a multimeter R * 1K file, or R * 10K file measurement FireWire (From the middle of the line, or 0.618), until you find the grounding point, generally see where there is a broken skin or joints, these places more problems! And then wrapped with insulating tape on OK.
- Q:What is the difference between wire and cable and power cable? RVV-PVC sheathed PVC insulated flexible cable belongs to which?
- 1: hard drive power cord 2: hard disk data cable (CD-ROM data cable) 3: graphics cable cable (if your graphics card is dual 6PIN power supply interface, but your power supply is only a 6PIN power supply interface, then the root switch on the use of ) 4: hard disk data cable (optical drive data cable) 5: hard drive power cord two hard drive power lines were inserted mechanical hard disk and solid state hard drive, two data lines were inserted mechanical hard disk and solid state hard drive, graphics card power supply cable are generally not , Believe that your power supply supports dual 6PIN power supply interface.
- Q:Cable trough, cable tray, cable tray, cable trench difference.
- Z represents the meaning of flame retardant. C on behalf of, generally divided into A, B, C three levels, A level is the highest. YJV22 academic name for the copper core insulated steel tape armored PVC sheathed. Some of the vernacular is: flame retardant C-class armored copper cable
- Q:Model Hisense LED55K360X3D how to connect digital TV set-top box
- until the automatic search after the program, you can watch the TV program
- Q:What is the difference between a KVVR cable and an RVV cable?
- Metal wire tube, PCV tube is usually used for home improvement (non) dark laying, KBG tube for the specification occasions, public equipment or other occasions. Under normal circumstances not dark laying. And the KBG tube protects the wire more
- Q:I buried the dark line when the tube with a 90 degree straight angle elbow, and now no way to wear through, may I ask what way to go through
- Please refer to GB electrical installation installation cable construction and acceptance specifications 5.3 cable duct laying 5.3.1 in the following locations, the cable should have a certain mechanical strength of the protective tube or the installation of protective cover: 1 cable into the buildings, tunnels, Through the floor and the walls. 2 from the channel lead to the poles, equipment, wall surface or house pedestrians easy to close, from the ground height of 2m below a section. 3 may have a gear that has been above the cable section; 4 other places that may be subject to mechanical damage. 5.3.2 There should be no water inside the pipeline and no clogging. When wearing the cable, do not damage the protective layer, can be used non-corrosive lubricant (powder). 5.3.3 cable laying in the laying of cables, should be clear, remove debris. 5.3.4 The number of cables in the pipe should meet the design requirements; AC single-core cable shall not penetrate the steel pipe alone. 5.3 Laying of cables in cable ducts 5.3.1 In the following locations, the cable shall have a protective tube of mechanical strength or a protective cover: 1 cable into the building, tunnel, through the floor and the wall. 2 from the channel lead to the poles, equipment, wall surface or house pedestrians easy to close, from the ground height of 2m below a section. 3 may have a gear that has been above the cable section; 4 other places that may be subject to mechanical damage. 5.3.2 There should be no water inside the pipeline and no clogging. When wearing the cable, do not damage the protective layer, can be used non-corrosive lubricant (powder). 5.3.3 cable laying in the laying of cables, should be clear, remove debris. 5.3.4 The number of cables in the pipe should meet the design requirements; AC single-core cable shall not penetrate the steel pipe alone.
We are now engaged in expanding our business scope to the global market and wish to establish mutually beneficial and long-lasting relationships with importers from all over the world. We stick to the belief of "strictly abiding by contracts and keeping credit are key points to be successful and they will lead both ourselves and our customers to a better future".
1. Manufacturer Overview
|Annual Output Value
||US$10 Million - US$50 Million
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||81% - 90%
|No.of Employees in Trade Department
||English, Chinese, Spanish
||3,000-5,000 square meters
|No. of Production Lines
||OEM Service Offered Design Service Offered Buyer Label Offered
|Product Price Range