thread drilling bit from China R32 T38 T45 T51
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
We are specialized in rock drilling tools，such as taper button bit, thread button bit, Integral drill rod, DTH bit, DTH hammer, Air leg rock drill, Excavator Mounted rock driling and splitter, expansive mortar.
Product:
Thread Button Bits: High quality and several thread with various carbide tips like YK05 are available. All products can be developed upon customers' request. Premium designs and steel and premium tungsten carbide insert grade T6 supplied by Boart Long year, Offers industry-leading strength and penetration rates for more productivity, Excellent straightness and hole clean quality, Get max. drilling performance for rock drills with long life to save up fuel cost rate.
Description of button bit:
Our company supply all kind of button bits with Rope thread
R32-43MM, R32-45MM, R32-51, R32-64, R32-76;
T38-64, T38-76MM, T38-89, T38-102MM;
T45-76MM, T45-89MM, T45-102MM;
T51-89MM, T51-102MM, T51-127MM etc.
all face design, flat face, drop-center face, normal body and retrac body.more
Specification of button bit:
Thread | Diameter range | Skirt Design | Face Design | Button Design |
R22 | 35 – 45mm | Normal | Flat Face | Hemispherical |
R25 | 33 – 57mm | Normal | Flat Face | Hemispherical |
R28 | 36 – 51mm | Normal | Flat Face | Hemispherical |
R32 | 41 – 89mm | Normal | Flat Face | Hemispherical |
R35 | 48 – 51mm | Normal | Flat Face | Hemispherical |
R38 | 64 – 102mm | Normal | Flat Face | Hemispherical |
T38 | 57 – 102mm | Normal | Flat Face | Hemispherical |
T45 | 70 – 127mm | Normal | Flat Face | Hemispherical |
T51 | 76 – 140mm | Normal | Flat Face | Hemispherical |
T60 | 89 – 140mm | Normal | Flat Face | Hemispherical |
ST58 | 89 – 140mm | Normal | Flat Face | Hemispherical |
GT60 | 93 – 140mm | Normal | Flat Face | Hemispherical |
ST68 | 102 – 152mm | Normal | Flat Face | Hemispherical |
Company Profile:
CNBM is the largest state-owned enterprise in China building material & equipment industry. Up until October of 2011, our total assets exceeded RMB 190 billion, with 130,000 employees and over 300 subordinate companies. In the year 2012, we are ranked as No. 365 in World Top 500 Enterprises by Fortune, and No. 2 in global building materials industry, second only to Saint-Gobain.
FAQ:
1. Q: Can I get some samples?
A: We are honored to offer you samples for quality check.
2. Q: Do you have the products in stock?
A : Yes , We have sample for several models now could supply to you.
3. Q: What’s the delivery time?
A: It usually takes about 25 days to produce an order. But the exact delivery time might be different for different orders or at different time.
4. Q: Can I mix different models in one container?
A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.
5. Q: How does your factory do regarding quality control?
A: Quality is priority. Rock drilling tools workers always attach great importance to quality control from the every beginning to the end of the production. Every product will be fully assembled and carefully tested before it's packed for shipment.
6. Q: Will you deliver the right goods as ordered? How can I trust you?
A: Yes, we will. Our company is world top 500, that is the biggest supplier and manufacture in China, having a good reputation around the world.
7. Q: What's the payment you accept ?
A: As usual our payment is T/T, other payment can consider.
As the largest manufacturer and exporter of building materials in China, we avail ourselves of this opportunity to approach you for mutual-beneficial cooperation. If you want to know more, pls contact me freely.
- Q:What drill holes are used in stainless steel basins?
- It is better to use stainless steel drill in stainless steel drilling. And the feed amount is greater than 0.15mm, so as not to cut the cold work hardening layer as much as possible. The cutting speed is as low as possible to reduce the cutting temperature.
- Q:How to use glass drills?
- The drill bit is clamped on the ordinary hand drill, and the finger is used to select the lower speed of the switch. If you want to drill holes will not collapse, then drill a part from the side, and then turn over the surface drilled through.
- Q:Carbide drills and high speed steel drills, which are suitable for working stainless steel?
- High cutting force and high cutting temperatureThis kind of material has high strength, large tangential stress and large plastic deformation during cutting, so it has great cutting force. In addition, the material has a poor thermal conductivity, which results in the increase of cutting temperature, and the high temperature often concentrates in the long and narrow area near the cutting edge of the tool, thus speeding up the tool wear.
- Q:The drill marked difference with hammer marks
- When the adjusting knob is pointing to the side of the tool is a hammer, impact drill function. The impact function used in wall drilling, drilling alone for wood, metal, and other drilling books
- Q:What is the standard angle of the drill bit?
- For example, HSS high-speed steel drill bit: vertex angle is generally 118 degrees, sometimes greater than 130 degrees; sharp blade; accuracy (blade height difference, symmetry, jitter) requirements are relatively low. There are many ways to correct the transverse blade. Hole roughing and less demanding, we generally use more. HM carbide drills: the top angle is generally 140 degrees; straight fluted drills are usually 130 degrees; and three edge drills are usually 150 degrees. The blade and nose (edge) are not sharp, often passivated, or inverted blade and chamfering, and require high accuracy. The horizontal edge is often into a S- shape, in favor of chip breaking
- Q:Twist drill 200mm deep bore, what does the drill grind?
- A standard twist drill is a very common drill tool. The utility model has the advantages of simple structure and convenient sharpening, but the grinding method is really good, and the method and the skill of grinding are well mastered. Factories also have such a situation, the work of more than ten years of workers, grinding well, twist drill also quite a lot. What is the reason for this? The key is methods and techniques. If the method is mastered, the problem will be solved.
- Q:What is the four hole five hole hammer
- The five pit is the BOSCH patent to produce this kind of hammer to buy patents to BOSCH can. Four pits are everywhere, and every household can produce it.
- Q:Drill hammer type matching specifications
- Four, five, six pit pit angle shank hammer respectively with four pits, five pits, six angle shank drill.
- Q:The difference between left and right drills used to drill holes
- The use of left-hand drill, mostly because the machine tool design can not meet the needs of the right-hand bit, as some spindle can not meet the right-hand thread, you must use the left-hand thread. The specific situation is not practical, it is difficult to say too clear.
- Q:Do we need drill bit for cast steel drilling?
- Drill wood. Drilling holes on wooden materials, combined with the use of woodworking bit, woodworking bit sales volume, the hardness of the tool is not high, the tool material is generally high speed steel. There is a small sharp point at the center of the drill bit, and the angles on both sides are relatively large, even without angle. For a good fixed position. In fact, drilling with metal drills can also drill wood. Because wood is easy to heat, brittle is not easy to come out, so we must slow down, often exit, remove brittle debris.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
thread drilling bit from China R32 T38 T45 T51
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Related keywords
