Place of Origin: Guangdong, China (Mainland)
Brand Name: Sunnyquick
Model Number: S-012
Frame Material: Aluminum Alloy
Open Style: Swing
Type: Casement Windows
Opening Pattern: Horizontal
Name: 1.4 thickness aluminum casement window
Profile: Aluminum 6063-T5
Profile Color: White/Gray/Blue/ Any Color
Glass: Single/Double/Triplex Glass
Glass Color: Clear/Gray/Brown/ Any Color
Wind Resistance: 3000Pa
Packaging & Delivery
|Packaging Details:||1.air bubble film+wood crates 2.carton+plywood 3.accept customized package|
- Q:Aluminum doors and windows and titanium doors and windows What is the difference
- That is, aluminum spindle with no problem is actually the same downstairs said good
- Q:Bathroom aluminum door handle lock how to lock the cylinder
- Disassembly method:
Remove the inside and outside of the two handle panel: the screw in the handle on the panel, the top one, the following one.
2. Remove the inside and outside the lock cylinder cap: screw in the house lock on the cap, that is, plug the left and right sides of the key.
3. Lock the cylinder positioning screw: the screw on the side of the door, in the middle of the lock, with the same height cylinder. The thickest is that.
4. At this time you can remove the old lock cylinder: the old and new lock cylinder, you can replace the.
Install new lock cylinder:
Order and split the opposite, pay attention to the following points:
1. Before installing the new lock cylinder, add a small amount of lock cylinder to the new lock cylinder dedicated lubricant. Repeat the lap with the key.
2. Cylindrical positioning screws must be tightened to prevent the screw after the opening is not good to open the door.
3. Lock the cap screw Do not twist particularly tight, to prevent the call, bad unlock.
4. When installing the inner handle panel, there is a fuse at the bottom, insert the corresponding fuse.
- Q:Details of aluminum alloy doors and windows production methods
- Aluminum alloy doors and windows production process
The line to find the rules → door and window hole processing → door and window openings buried iron pieces → aluminum alloy doors and windows unpacking inspection → according to the drawings number to the installation site → check the aluminum alloy protective film → aluminum doors and windows installation → door window around the caulk, fill Insulation material → cleaning → installation of hardware accessories → installation of doors and windows seal → quality inspection → yarn fan installation
Shell line to find the rules: at the highest level to find the door window edge, with a large line of the door line will be cited under the line, and in each layer of the window at the crossed mark, the individual should not straight mouth should be chiseled. High-rise buildings can be used to find the vertical line of theodolite.
The horizontal position of the door and window should be based on the floor + 1250px horizontal line, upside down, the amount of the window under the skin elevation, straight line, each floor under the skin (if the same height) should be on the same level.
Wall thickness direction of the installation location: According to the external wall sample and the width of the sill plate to determine the direction of the installation of aluminum doors and windows in the direction of wall thickness; if the wall thickness deviation, in principle, should be the same room window plate exposed size Shall prevail, the windowsill plate should be inserted into the window of aluminum alloy window 5mm is appropriate.
Installation of aluminum alloy window water: according to the design requirements will be fixed on the aluminum alloy window, should ensure that the installation location is correct and firm.
- Q:Aluminum alloy doors and windows profiles 80,868 What does it mean?
- Aluminum width 80 on behalf of the aluminum profile width of 80MM 868 generally represents the width of aluminum 86.8, there are manufacturers 85 86. Basically that is the meaning of that
- Q:People at this time feel the electric shock in the end is how is it?
- As the dry season, the body and the earth insulation resistance increases, therefore, due to take off the coat friction generated by static electricity, can not form a loop with the earth, the body at this time to capture the electronic and ground potential difference, then, if you touch the metal door Handle, the electron will be released, "electric shock" after the body and the ground potential difference will be neutralized to reach a balance.
- Q:How to clean aluminum doors and windows? Make it a new look.
- 1, in the clean aluminum doors and windows, do not step on the aluminum frame, do not pull the box for support. So easy to wear the doors and windows or their own accident.
2, aluminum doors and windows can be used soft cloth stained with water or neutral detergent, do not use ordinary soap and detergent, but can not use decontamination powder, toilet and other strong acid and alkali cleaning agent, this will corrode the profile surface.
3, sealed tops and glass glue is to ensure that the aluminum doors and windows sealed insulation of the key structure, if the fall to timely repair, replacement.
4, after the rain, should be wiped in time wet glass and window frames.
5, should always check the doors and windows frame connection parts, tighten the bolt in time to replace the damaged parts. Positioning pin, wind support, to spring and other aluminum doors and windows of the vulnerable parts, to always check, regularly add lubricants to keep clean and flexible.
6, aluminum doors and windows in use, the action should be light, push and pull its natural; found difficult not hard pull hard push, should first rule out the fault. Fouling, deformation is the main reason for the difficulty of push and pull of aluminum alloy doors and windows, to keep the door frame clean, especially the sliding slot cleaning. Vacuum cleaner can be used to suck the tank and the door closed the fouling.
7, often check the aluminum window frame wall joints, the long time aluminum doors and windows if loose so easy to make the overall deformation of the frame, so that doors and windows can not be closed, sealed. So the connection of the screw loosening should be immediately tightened, such as screw feet loose, the application of epoxy strong glue to adjust a small amount of cement seal.
- Q:how can i cut a nice metal doors?
- You can cut the bottom off of a metal door. You will need to take the door and set it up on a stable work surface. First, remove the weather strip on the bottom. Determine how much needs to be cut off and make your marks or draw a straight line. Attach a straight edge with clamps above your marks equal to the distance that the edge of your circular saw (skill saw)blade is set back from the side of the base plate. Make sure that you have a good metal cutting blade installed in your saw. Cut the door, ensuring that you move the saw along at a steady pace. You may want to insert a wooden filler into the space that is open now and reinstall the weather stripping. For safety sake you should be wearing a dust mask and face sheild along with ear protection and long sleeves. Also ensure that you do this away from any combustible material as sparks will fly. You will have to sand, prime and paint the cut area of the door once completed
- Q:How to weld aluminum and aluminum doors and windows
- First, the tungsten needle to wear sharp, blunt current is not concentrated flowering on the end.
Second, the distance between the tungsten needle and the weld on the stick together, far away on the arc flowering, a blossom on the burning black, tungsten needle fast bald, on their own radiation is also strong.
Third, the control of the switch is the art, especially the thin plate welding, only about what point, this is not automatic movement and automatic wire to the automatic welding machine, continuous burn to wear.
Fourth, to give silk, which is feel, the senior welding wire is cut with the shearing machine 304 plate, do not buy bundles, of course, at the wholesale point, you can find good.
Fourth, try to use yellow or white mark tungsten needle, so the requirements of the high technology, the reason is not open to say.
Fifth, foreign work in the ventilation conditions, equipped with leather gloves, clothing, automatic light mask, the reason is not openly said.
Sixth, to the torch of the ceramic head to block the arc, the specific is the tail of the torch as far as possible toward their own face.
Seventh, you can the pool of temperature, size, switch action intuitive and premonition, is a senior technician.
Eighth, it is not easy to work, can master the basic skills on the line.
- Q:Balcony of the aluminum alloy door how to install it?
- Reserved openings: the wall should be reserved than the aluminum windows and doors larger window, usually about 1.5cm each increase, 1.5cm on the increase, the next increase of 2.5cm to facilitate the installation of aluminum doors and windows, if the set size error Too large to cause aluminum doors and windows can not be installed when the builders should be responsible for handling.
Lofting; aluminum doors and windows should be installed before the first set out the three baseline, as the installation of the preparation. 1. Center Baseline - Determines the center of the window. 2. Horizontal Baseline - Determines the height of the window. 3. Enter the baseline - determine the inside and outside of the window.
Installation of the frame: the installation of workers in accordance with the above location, the installation of aluminum doors and windows to use the line fall, level, set the true level, the vertical position in the aluminum alloy frame around the use of wooden wedge fastening.
Embedding the fixing piece: Embed the fixing piece in the concrete wall or brick wall with 3-4cm, fix the stone with 1: 2 cement mortar, or fix the welding piece with steel.
Cement attachment: fixed piece fixed, the surrounding wooden wedge removed by the installer after the cement mortar caulking, so as not to aluminum alloy frame and the gap between the wall seepage.
The following are the same as the "
Reserved for watercrow sewn: aluminum alloy doors and windows after caulking, the outer edge of the frame around the edge of the paint, the cement workers need to 1cm square feet of the peg, reserved for plug water seam, after the paint set off to prevent leakage To fill, to prevent the infiltration of rain.
- Q:What are the characteristics of red apple aluminum doors and windows?
- Never heard of red apple aluminum windows and doors!
But aluminum doors and windows are good!
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range