1. The use of a simple floor structure and an external divider is easy for maintenance;
2. The safety frame is optional;
3. The single-acting or double-acting clutch is optional;
4. The various gear configurations, such as 8+2, 8+8, and 16+4 are optional, and the velocity distribution is reasonable to meet different operating needs;
5. The synchronized shuttle shift is optional, and the operation is easy, flexible and reliable;
6. The operations of hydraulic steering, the mandrel cylinder front drive axle are easy and flexible.
|Overall dimension(L * W * H)||3225*1440*1900|
|Track(front/rear) regulating method||Fixed/stepless|
|Min.operating weight (kg)||1400|
|Theoretical speed of each gear(forward/reverse)||1.72-26.02/2.25-10.39；1.72-26.02/1.61-24.24；0.37-26.02/0.5-10.78|
|Brand||Laidong, Jiangdong, lijia|
|Engine type||In-line, four-stroke|
|Intake mode||Natural intake|
|Number of cylinders||3|
|Engine rated power kW@rpm||14.7|
|Air cleaner type||Dry or wet type|
|Type of cooling system||Water-cooled|
|Max. Torque@ revolving speed (rpm)||≥88/1650|
|Specific fuel consumption at rated conditions (g/kW.h)||≤244|
|Fuel tank capacity (L)||29|
|Steering brake system|
|Type of steering system||Hydraulic/mechanical|
|Type of steering gear||Cam and roller steering gear/cycloid orbitrol steering gear|
|Type of braking system||Shoe type|
|Clutch type||Single-action/double action|
|Gearbox type||Two-axis mechanical gearbox|
|Gearbox shift mode||Shift sleeve +sliding gear|
|Type of central transmission||Spiral bevel gear type|
|Final transmission mode (front/rear)||Built-in type, single-stage spur gear|
|Type of hydraulic suspension system||Open-center, separated type|
|Type of linkage||Three point rear linkage|
|Linkage classes||Class 0 or class I|
|Lift capacity(610mm point))(kN)||5.2|
|Regulating mode||Positioning control and floating control|
|Type of PTO shaft||Non-independent type|
|The number of PTO shaft splines||6 splines/8splines|
|Outer diameter of PTO shaft spline||φ35/φ38|
|PTO shaft speed||540/760 or 540/1000|
|Hydraulic output flow (L/min)||26|
- Q:What's the difference between machines and machines?
- A machine is a facility that can do a specific job as required. Machinery is a general term for all kinds of machines. It can sometimes be summed up as an industry. For example, the machinery industry.
- Q:What are the companies in the chain of construction machinery in China?
- Domestic construction machinery manufacturers, each province has a level agent, and then in each region and then set up two agents (or branch), so the domestic construction machinery does not exist in the country chain.
- Q:About the marketing strategy of construction machinery industry
- The most important thing is to be seductive, in order to allow the user to accept, there should be some temptation provisions, increase the interests of users, these provisions should be extended to pre sales policy, and all the purchases are linked, the greater the amount of benefit more, make dealers feel investment income is greater than the business other brand products revenue
- Q:What are the core technologies involved in the core components of construction machinery?
- 1, the core components of construction machinery core technology in which areas are possible, as long as we do not know the technology, only a few people know, and this technology is also a lot of applications, this is called the core technology.
- Q:Can you use mechanical oil instead of engineering gear oil?
- Mechanical oil is now called "full loss system oil", due to many types of machinery and equipment, the role is also different, so the variety of lubricating oil is also required. The most commonly used, representative lubricants are available:
- Q:The difference between mechanical engineering and automation and electrical engineering
- Mechanical engineering is mainly engaged in the design and structure of heavy industry, most of the work has a variety of craft, structure design, mechanical maintenance; electrical electronics, mainly motor, control, system of electricity, basically include, and MCU, power protection, such as the DSP working face is very wide, power plant, Design Institute Electrical, electronics manufacturing, technology development, technical support, technical sales;
- Q:Why is the paint of the construction machinery yellow?
- Conspicuous... It's a popular answer, but it's true.. Just like the black box is orange
- Q:How to make simple account for construction machinery rental?
- Now many accounting software such as Kingdee U8 ah, ah, ah but you don't know it's really not accounting method, accounting is done, when receiving the money
- Q:What kind of job is a mechanic in the end?
- Mechanical engineer is a person who works in a mechanical engineering field and has some experience and level. Mechanical engineers are generally divided into three levels, Junior Mechanical Engineer, intermediate mechanical engineer, senior mechanical engineer. The mechanical engineer is usually referred to as the three level of mechanical engineers, mechanical engineers can also refer to the intermediate.
- Q:What is the management of construction machinery?
- (3) responsible for the temporary use of electricity and installation of heavy machinery and equipment management, (demolition), use, maintenance and maintenance, strengthen the demolition units and the demolition personnel, special operations personnel management, strengthen the lifting of foundation construction, equipment installation, lifting and removing nodes, and other key aspects of the management and supervision of lifting equipment and temporary electricity management system;
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range