||Lamp luminous flux(lm):
1. Patented AC (Alternative current) directly drive.
2. No LED driver design, replace the LED driver by AC chips, more stable and reliable.
3. The invention won the Award of 2014 Geneva International Exhibition of Inventions
4. Prolong the service life of T8 tube to 50,000 hours, it is 2 times as long as traditional driver.
5. High light efficiency. Use high quality SMD chips to ensure the high light efficiency
6. Low lumens depreciation. Less than 3% per year. The users needn’t to replace the tube during 4-8 years.
Perfect AC directly drive solution which won the won the 2014 Geneva International Exhibition of Inventions.
As the global leader in LED driving technology.
AC Chips replace the traditional LED driver.
The service life of AC chips more than 100,000 hours，so service life of the whole tube more than 50,000 hours.
The ueser needn't replace the tube in 4-8 years.
LED T8 tube 10W
The LED type
5730 SMD LED
Number of LED
Angle of LED
Level of Waterproof
Lamp cover material
High light transmittance glass tube
Lamp cover color
Mode of package
- Q:Now the home decorates is to use LED good or the good of the lamp tube
- Lamp tube installation is convenient, cheap; LED installation is a little bit of a hassle, but it's much more beautiful, durable, long-lasting and saves electricity
- Q:Can the LED tube be installed as a general lamp holder? It won't burn easily
- Cannot be installed directly, need to change internal wiring. Leds are not the same as the traditional lamp tubes, which have the power supply inside the LED tube, and the input voltage at both ends of the tube is 220V. The traditional lamp power source is placed outside, and the voltage at both ends of the lamp is as high as a few hundred volts. If the LED tube is directly installed, it will burn down the power in the LED lamp tube because of the hundreds of volts of voltage that the original fluorescent lamp's ballast outputs. 3, therefore, the LED light tube cannot be installed directly in the traditional fluorescent tubes, the need to remove the internal ballast, then change the input at the ends of the line. LED bulbs are usually two incoming lines, one firewire and one zero line.
- Q:What is the flux of the general led daylight light
- My own production of LED fluorescent lamp, single lamp 130 lm/W, if the light bead is 16.5 W, the total luminous flux can reach 2145 lm, efficient use of power supply in 90%, total power is around 18 W lights lit, overlapping there will be a loss, the loss and the printing ink of aluminum plate used reflective effect has much to do, usually in about 10% of the loss, add cover outside, usually the light transmittance of transparent cover is 94%, milky white cover transmittance is 75% to 75%, so in a transparent bubble of 18 W LED fluorescent lamp, for example, using the highest light LED, the total luminous flux can reach 130 * 16.5 * 94% * 90% = 1800 lm, the whole lighting effect of about 100 lm/W, quite obvious energy saving effect or hi
- Q:What is the difference between a radar sensor and an infrared LED fluorescent lamp?
- Infrared inductance LED fluorescent lamp: inductance distance is general, Angle is relatively small, the influence of environmental temperature dust is big, in 37 degree circumstance, the sense distance can shorten. (the detection of infrared sensor head needs to be revealed, not easy to install).
- Q:How do you know whether a fluorescent tube is good or bad
- In the case of leds, there is no direct way to judge the use of a multimeter. That will be in the absence of special apparatus, find a good matching of drive, according to the manual connection method directly connected, electricity testing. It's good to lighten up. Conversely, still.
- Q:How does the energy-saving lamp tube set quota
- These three lights are not a concept at all. The incandescent lamp is divided by the development of the lamp. For example, candles, incandescent lamps, fluorescent lights, leds. The changing of the light. The incandescent lamp is a traditional tungsten lamp. Energy-saving lamps. The current development, and the fact that leds are replacing fluorescent lights, are currently used by most families. The light bulb is completely named according to the way the lamp is installed.
- Q:Are led fluorescent tubes not available for lighting?
- But to see if there is a built-in power source, the external power source is not directly 220V,
- Q:Are the old daylight bulbs worth recycling?
- The fluorescent lamp doesn't seem to have a dedicated recycling system. Go to secondhand market transfer, after appearance is refurbished, again can use Led fluorescent lights are needed
- Q:Fluorescent lamp double lamp tube wiring method
- Hello, first of all make sure you double tube fluorescent lamp is electronic or inductance, the inductance ballast on the side of the light directly to the crural line received a ballast, ballast another terminal from the actuators to a power supply, another lamp crural line also from the actuators to a power supply,
- Q:How did the new daylight tube ring
- Gas rolling phenomenon, low temperature.I hope my answer will help you.
1. Manufacturer Overview
|Annual Output Value
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
|No. of Production Lines
|Product Price Range