Q:Can leds be used for a regular fluorescent lamp?

General LED fluorescent lamp tube does not use ballast, use the ballast to be eliminated. The LED fluorescent tube is driven by its own. How to reinvent the person who needs to ask you to sell your LED tube, different brand modification steps are different. Some of them only need to be torn down one, and my house is all torn down. I bought the LEDT8 for the 1.2m double-end input.

Q:The LED fluorescent tube plus the ballast why is it still going to press?

Capacitor to eliminate the effect of the power supply of electromagnetic interference with ballast tank formation, and increase the voltage amplitude of the start pulse. An electrode in the discharge tube with double metal,

Q:What about the normal daylight tubes replaced with LED tubes, ballast and flashers?

The rectifier and the regenerator can be removed, the specific installation method should be changed according to the electric way of the LED lamp tube

Q:Does daylight bulbs damage electronic lamp heads?

Lamp tube burn black affirmation not to be able, current become big, affirmation want to burn the lamp head, change, oneself open repair also can, very simple

Q:It is the telephone of some enterprise management that asks me to take good use of, ask me how to use, how to contact them, what should I say when contacted I am a salesman

Company each department is responsible for the work content is different, you entered the company at the very least department what is clearly, so during the later work need department coordination, you can apply for to support immediately available. It is best to know the management of each department, otherwise you will remember it and not be the same person.

Q:How did the new daylight tube ring

Gas rolling phenomenon, low temperature.I hope my answer will help you.

Q:Can compatible inductance ballast, electronic ballast led fluorescent lamp tube which have to sell?

I'm afraid you're going to be disappointed. According to the principle of the circuit, it's not easy to do it all.

Q:The difference between the Ledt5 lamp and the temperature 3000k and 2700k

As it turns out, there's a lot of difference between 300 k in low color temperature. 2700K is warm and yellow and 3000K is warm and white. The latter is brighter, but the former is warmer!

Q:What's the difference between an LED fluorescent lamp and an ordinary light tube?

The next part of LED color temperature: the work of various lighting fixtures... | returns the advantage of the log list LED fluorescent lamp to share the copy address log address: use Ctrl + C to copy and post it to the friend. Broadcast to weibo pig eight quit to do the monk May 17, 2011, when reading and classification (0), (4) comments: personal diary permissions: public font: set-top permissions set in small cuhk more ▼ ▼ in recommended log To illicit close log Remove the edit the led fluorescent lamp to become one of the earliest to enter indoor led lamps and lanterns, because it is relative to fluorescent lamp has 10 major advantages: 1. High luminous efficiency Fluorescent lamp luminous efficiency is about 55-80 lm/W (Philips company T8 fluorescent lamp luminous efficiency is 72 lm/W), and LED the luminous efficiency of above 100 lm/W, recently Cree company XLampXP - G luminous efficiency has been to 130 lumens/W, and will improve in the future. The difference is now nearly double. And it could be more than three times that. The efficiency of lamps and lanterns efficiency is mainly to point to effective light effect, because fluorescent lamp is 360-degree, and the light that is sent in the opposite direction has no use. So fluorescent lamp USES a white chimney normally, can take a considerable part of the reverse light reflected, in general, fluorescent lamps and lanterns of efficiency is about 70%. LED fluorescent lights are 120 degrees, so all light is efficient.

Q:Why do LED bulbs have stroboscopic frequency? The camera

It's a huge secret to be able to look at led lights and take a camera, and god lets you discover a huge secret, hehe. Secretly tell you You use your camera to photograph corrugated and stroboscopic, indicating that your led tube is a product that is resistant to pressure and pressure, not a product that is heng-current. Stroboscopic because domestic voltage changes back and forth between 180-260 - v, voltage changes in current led products to you after the impact, and your drive is not out of constant pressure, will only make the led lamp bead to under the impact. Simply put, your led tube is not very good, and it will soon be weak and not very long. Ask you to buy the time to ask clear, the lightning led lamp tube and the bracket on Tmall is the cross current constant pressure, can go to see. I hope I can help you