Quick Details of Swing Check Valve
Standard or Nonstandard:
Stainless Steel, Ductile Iron
Temperature of Media:
Place of Origin:
Packaging & Delivery of Swing Check Valve
Plywood case & carton
Specifications of Swing Check Valve
Rating: Class 150-1500
Design & Manufacture: API, ASME B 1610, BS 1868
Face to face dimension: API 6D
Usage/Applications Of Swing Check Valve
-Various modes of the pipeline, prevent the medium backflow
- Products Design Features: Flanged & Butt-welding ends swing check valves are used in pipes under pressures between
PN 1.6-16.0MPa,Class 150-900Lb,working temperatures between -29-570 °C, They are used in industries include oil, chemistry, pharmaceutical, fertilizer.
- Operation: Handle operation, electric.
- Q:What's the W in the check valve H44W?
- W represents the sealing surface is the body seal, that is, directly from the valve body out of the sealing surface
- Q:Is it necessary to install a check valve in the piston refrigeration compressor?
- Following chart:Turn left and turn right | Such arrangements because when the piston machine more than 2 units installed on the same system, if there is a part of the unit stops working in another part of the unit, it will cause the exhaust side wall will refrigerant condensation in the exhaust no work unit tube, the liquid refrigerant condensation along the exhaust the accumulation of down pipe in the exhaust pipe, may cause the cylinder inlet fluid or startup are high pressure, easy to cause the damage of the compressor. Therefore, when multiple compressors are connected in parallel, the check valve must be installed at the top of the exhaust pipe. Not only the piston machine, screw machine should also be installed in the exhaust pipe, otherwise the oil inside is all refrigerant liquid, leading to running oil, there have been such problems in the project.
- Q:The difference between swing check valve and lift check valve
- Standard light valve professionals answer the difference between the lift check valve and the swing check valve:Lift check valves: check valves slide along the vertical centerline of the valve. The lift check valves can only be installed on the horizontal pipe.
- Q:Should the flue check valve be made by the civil team or the installation team?
- Internal construction, check the inner ring outside the cement glue installed
- Q:Check valve does not automatically check back, how to adjust?
- The non-return valve does not automatically check the cause:1, the valve at both ends of the road must be blocked, there is dry ventilated room. Such as long-term storage, should always check rust corrosion.2, the valve should be cleaned before installation and eliminate the defects during transportation.3, the installation must be carefully checked on the valve signs and nameplates are in line with the use of requirements.
- Q:What is the difference between the check valve and the check valve?
- The same thing, the different name, the appraisal finishedPrices vary greatly, probably due to specifications, material, performance and other differences
- Q:Pump adapter need check valve?
- General in the flange pipe interface or who is interface settings simple check valve, safety valve is white, but does not apply to the north, the northern cold, need to separate in the pipeline is provided with a check valve, a higher temperature of the South without suitable for direct use may be frozen.
- Q:What's the difference between the cut-off check valve and the stop valve?
- The stop check valve prevents backflow and is indistinguishable from the exterior, but can be separated from the spool.
- Q:What does the check valve "H44Y-160" mean?
- H- check valve, 4 flange connection, 4 spiral structure, Y- sealing surface material is hard alloy. 160 table nominal pressure 16MPa
- Q:What is the function of the stop valve and check valve installed on the water supply pipe?
- The check valve belongs to an automatic valve, whose main function is to prevent the backflow of medium, prevent the reverse of pump and drive motor, and release the container medium.
Yue,located in Ducun Industrial Park, Linhu Town, Wuzhong District, Suzhou, mainly produces valves. Our company is equipped with one scale automatic static coating line, two assembly testing lines, many sets of semi-automatic assembly testing equipment as well as processing equipment such as 5m,3m and 2m vertical lathes, 4m and 2m milling machines and boring machines.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 3 Million
||West Europe, South Africa, the Middle Eas
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
|No.of Employees in Trade Department
||English; Chinese; Spain; Alabic
||Above 18,000 square meters
|No. of Production Lines
||OEM Service Offered; Design Service Offered
|Product Price Range