Use: Carton Sealing
Adhesive Side: Single Sided
Adhesive Type: Water Activated
Design Printing: Offer Printing
Place of Origin: China (Mainland)
color: clear, super clear, crystal clear, red, blue, brown, yellow, green etc
|ItemNo.||Carrier ||Adhesive ||Total|
|Peel Adhesion||Holding |
|BP-40||BOPP film||water based acrylic ||40 micron||>18#||0.5kgf/25mm||>24h||>30N/cm||<180%|
|BP-45||BOPP film||water based acrylic ||45 micron||>18#||0.5kgf/25mm||>24h||>30N/cm||<180%|
|BP-50||BOPP film||water based acrylic ||50 micron||>20#||0.5kgf/25mm||>24h||>30N/cm||<180%|
|BP-65||BOPP film||water based acrylic ||65 micron||>24#||7.88N/25mm||>40h||>30N/cm||<180%|
Bopp tape is mainly for Carton sealing & packing, Light duty packaging, bundling, holding, and other office & household use.
Paper Core ID: 76mm
Jumbo size: 1280mm x 4000m; 1620mm x 4000m
Cut roll size: As per customer's requirement
Cut rolls: 6 rolls per shrink, 36/54/72 rolls per carton with or without pallet
Jumbo rolls & log rolls: Packed with kraft paper and stretch wrap film, with or without pallet
1. Stable financial status and sound reputation as a state invested corporation under the direct administration of the State Council of PRC;
2. CNBM’s world wide influence as one of the 500 global fortunes specializing in building materials including adhesive tapes;
3. More than a decade’s exporting experience and technology in adhesive tape industry;
4. Preferencial shipping channels, with a separate team dealing with shipping.
- Q:Flexo printing tape, what are the common, what are the advantages and disadvantages?
- (3) when pasting the plate, the area of the adhesive tape should be larger than the area of the printing plate. That is to say, the edge of the adhesive tape should be larger than the edge of the printing plate. EPSON will greatly reduce the risk of the warped version.(4) when printing, the interface of the printing plate should avoid the interface of the adhesive tape. If the interface of the printing plate is facing the interface of the adhesive tape, it will lead to the sticking of the printing plate at the interface.(5) in a printing plate cylinder or sleeve surface mount tape, recommend the use of scraper instead of the hand rolled plate mounting tape printability, because it is relative to the hand operation, the scraper can put more pressure on the mounting tape so that mounting tape better stick to the printing plate or the sleeve surface, while effectively avoiding bubbles; in mounting tape stuck to the surface of the plate, with a soft rubber roller instead of rolling plate flexo, in order to better fit the drive plate, bubbles, protection plate surface fine mesh point.
- Q:How many tapes do you need to make a tape? How do you calculate a mother roll and how many tapes do you make?
- 3. The mother rolls of different factories have different prices. You ask, that's how much beef is now. You don't know where to supply and where to sell4, that is, the price you sell, minus your cost price. This is a bit of a pupil's problem
- Q:How to adjust the tightness of belt pulley in belt sealing machine?
- Full automatic sealing machine, pneumatic sealing machine, folding lid sealing machine, corner sealing machine,
- Q:Food packaging, sealing tape printing and product manufacturers inconsistent with the use of it?
- This generally does not affect how, but this is the image of manufacturers
- Q:How does the electrician use waterproof insulation tape?
- Winding to the conductor exposed outside 2CM, generally winding 2~3 layer can. At first, you will not get used to the whole coil. You can tear up a paragraph and use it. After winding, wrap the 2~3 layer with ordinary insulating tape.
- Q:Which kind of adhesive tape is of good quality?
- Is the material new?. Does glue keep its color for a long time?. The thickness of the tape is not thicker, the better.
- Q:Has anyone done a tape cut? What about profit?
- This saying is very reasonable, generally 2.5 square even high profits, sometimes with packing, a tape can earn 3 dollars a day, at least to go more than 300 pieces of goods to be profitable, or than dealers, my home is tape cutting
- Q:The wrapping tape is left behind the door and the viscose is dry
- Chemicals or organic solvents are bound to damage the paint. If the glue is dry, it is recommended to put on a rubber, and generally go down.
- Q:Selection of tapes
- So how do you choose the tape? In fact, the adhesive tape in the use of good and bad there are two criteria, one is the initial viscosity, one is to maintain the force, the two are inversely proportional. Under normal circumstances, adhesive force less than 10 adhesive tape is glue coated, teach less, usually only about 20 microns, such as stationery, tape, ordinary promotion belt used adhesive tape. The initial adhesive force of the normal sealing tape is between 15-20. The thickness of the adhesive tape is 22-28 microns. Is the standard thickness. But the tape on the market are mostly mixed with impurities, so the increase of the thickness of shielding impurities, the glue is also mixed with the toner, so transparent tape appeared egg yellow, light green, this tape is generally inferior.
- Q:The production of transparent tape material is what to do
- The base material of the sealing adhesive tape is BOPP film.BOPP is a very important flexible packaging material, and has been widely used. BOPP film is colorless, odorless, tasteless, non-toxic, and has high tensile strength, impact strength, rigidity, toughness and good transparency. It is a high quality substrate for making transparent sealing tape. BOPP film has low surface energy, and it needs corona treatment before gluing or printing. However, the BOPP film has good printing adaptability after corona treatment. It can be printed by printing and has a beautiful appearance, so it is often used as the surface material of composite films. BOPP film is also inadequate, such as easy accumulation of static electricity, no heat sealing and so on. In the high-speed production line, BOPP film is easy to generate static electricity. Electrostatic eliminator is necessary. In order to obtain the BOPP heat seal film, can be on the surface of BOPP film after corona treatment coating heat sealing resin glue, such as PVDC, EVA latex latex, can also be coated with solvent glue, coating or extrusion method can be applied to the production of extruded composite heat sealing film BOPP. The film is widely used in bread, clothing, footwear and other packaging, and cigarettes, books cover packaging. The tear strength of BOPP film increases after stretching, but the secondary tearing strength is very low. Therefore, no cut can be left at the ends of the BOPP film, otherwise the BOPP film is easy to tear when printed and compounded. BOPP coated self-adhesive, we can produce our commonly used sealing tape, tape sealing tape, is a larger amount of BOPP market.
W are a well known company in China specializing in adhesive tapes field. Its good quality has won the trust and interest of customers all over the world.
1. Manufacturer Overview
|Annual Output Value
||Above US$ 1000 Million
||Southeast Asia; South America; Eastern Europe; North America; Northern Europe; South Asia; Western Europe; Africa; Mid East
2. Manufacturer Certificates
|a) Certification Name
3. Manufacturer Capability
||41% - 50%
|No.of Employees in Trade Department
||Above 10,000 square meters
|No. of Production Lines
||produce single sided tapes,double sided tapes, masking tape, Opp tape
|Product Price Range